Video
Wooden Camera WC-144900 19mm Bolt-On Rod
- For Mounting Camera Accessories
- Mount 19mm accessories
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$35.95
Wooden Camera Director's Monitor Cage v3 with Carbon Fiber Handgrips
- Handhold Your Director's Monitor
- Carbon Fibre Handgrips and Rods
- Swing-Away Access, Neck Strap
- For Odyssey, SmallHD, TVLogic Monitors
- Mount a V-Mount/Gold Mount Battery Plate
In stock
Ships tomorrow
You Pay:
$485.00
Wooden Camera 2-Stage Clamp-On 4 x 5.65" Zip Box (90-95mm)
- Clamp-On Rubber Matte Box/Sunshade
- For 90-95mm Outside-Diameter Lenses
- Accepts Up to Two 101.6 x 143.5 mm Filters
- Wide Design Prevents Vignetting
- Durable Rubber and Stainless Steel
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$199.00
Wooden Camera WC-151300 Safety NATO Rail (2.76" / 70mm)
- NATO Standard Rail
- For Mounting NATO-Compatible Accessories
- Spring-Loaded Safety Stops on Each End
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$160.00
Wooden Camera Cage for Blackmagic Pocket Cinema Camera 6K Pro
- Protective, Open-Style Camera Cage
- Keeps Camera Handgrip Accessible
- 1/4"-20 & 3/8"-16 Accessory Threads
- Right-Angle HDMI Adapter & HDMI Clamp
- ARRI-Style Anti-Twist Locating Holes
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$565.00
Wooden Camera Micro Battery Plate Adapter for RED V-RAPTOR (V-Mount to V-Mount)
- Adapts V-Mount V-RAPTOR to V-Mount
- For Micro & Full-Size Batteries
- 2 x D-Tap Output Ports
- 3.8A E-Fuse with Reset Button
- Camera Stays Running If Voltage Exceeded
- Durable Anodised Aluminium Build
In stock
Ships tomorrow
You Pay:
$599.01
Wooden Camera Side NATO Bracket for RED KOMODO
- Attach Directly to Either Side of Camera
- NATO Rail for Accessories
- Spring-Loaded Security Pins
- 1/4"-20 and 3/8"-16 Threads
In stock
Ships tomorrow
You Pay:
$99.00
Wooden Camera WC V-Mount Battery Plate (Dual D-Tap)
- IDX V-Mount
- 12V power
- D-Tap connectors
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$239.00
Wooden Camera Battery Slide Pro for Sony FX6 (V-Mount)
- Attaches to Rear of FX6 Camera
- Supports V-Mount Battery
- Access to BP-U Battery Allows Hot Swaps
- 3 x D-Tap Ports, Protective Digital Fuse
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$699.00
Wooden Camera Zip Focus Single-Rod Follow Focus (19/15mm Studio)
- Pivots and Adjusts to Fit Most Lenses
- 1:1 Gear Ratio
- 0.8 MOD and Friction Drive Gears
- Includes 2 Standard Marking Disks
- Hard-Stop Disk for DSLR Lenses
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$795.00
Wooden Camera Sony FX6 Unified Accessory Kit Pro (V-Mount)
- Top Plate for Sony FX6
- Unified Baseplate with 15mm Rod Clamps
- 15mm Rod Pair, 15" Long
- 12" Long Safety Dovetail Plate
- V-Mount Battery Plate
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$2,475.00
Wooden Camera Top Plate for Sony FX6
- Cheese Plate Attaches to Top of Camera
- 1/4"-20 and 3/8"-16 Tapped Holes
- 3/8"-16 ARRI Accessory Mounts
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$299.00
Wooden Camera LCD Sun Shade (6 to 7")
- Covers 6-7" Monitor Screens (Diagonal)
- Fits RED 7" Touchscreen & LCD Monitors
- Four-Sided Coverage
- Flexible Bottom Area for Button Access
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$95.00
Wooden Camera Telescopic Rosette Arm
- 4.5 to 6.7" Telescopic Extension Arm
- 2 x ARRI-Standard Rosettes
- Thumb-Lever Fasteners
- Use to Extend Separate Handgrip
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$235.00
Wooden Camera Sony FX6 Unified Accessory Kit (Advanced)
- Top Plate for Sony FX6
- Unified Baseplate with 15mm Rod Clamps
- 15mm Rod Pair, 12" Long
- 8" Long Safety Dovetail Plate
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$1,585.00
Wooden Camera Coiled BNC to BNC Cable (25 to 56cm)
- Extends 25.4 cm to 56 cm
- RoHS compliant
- Ideal for mobility and configurations
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$39.95
Wooden Camera LCD Sun Shade (4 to 5")
- Covers 10-13 cm Monitor Screens (Diagonal)
- Fits RED 4.7" & 5" Touchscreen Monitors
- Four-Sided Coverage
- Flexible Bottom Area for Button Access
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$95.00
Wooden Camera Nato Handle Plus V2 Kit (Nato Arri 70mm Rail, 1.67" Screw Channel)
Quick release top handle that attaches and detaches quickly without tools
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$399.00
Wooden Camera Unified VCT Wedge Plate
- Works with WC Unified Baseplate Systems
- Dovetail Top & Shoulder Pad Bottom
- Two ARRI Rosettes for Handgrips
- Multiple 1/4"-20 & ARRI Accessory Mounts
- Lightweight Aluminium Composition
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$775.00
Wooden Camera Universal Lens Support (19mm/15mm Studio)
- For 19mm & 15mm Studio Offset Rods
- 3/8"-16 and 1/4"-20 Screws
- Y-Bracket with Rollers for DSLR Lenses
- Vertical & Horizontal Adjustments
- Small & Large Support Extensions
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$459.00
Wooden Camera Canon R Mount To ARRI LPL Mount Adapter
- 1/4-20 threaded hole on the bottom
- LPL Cap included to prevent dust from entering sensor area when lens is not attached
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$970.00
Wooden Camera Battery Slide for RED KOMODO Camera (V-Mount)
- Accepts V-Mount Batteries
- For RED KOMODO Camera
- D-Tap Accessory Port
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$730.00
Wooden Camera D-Box 2-Pin LEMO-Compatible Kit V-Mount
- V-Mount Battery Distribution Box
- Fits Between Battery & Camera Mount
- 2x 2-Pin LEMO-Compatbile Outputs
- 2x D-Tap Outputs
- 5V USB Output
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$890.00
Wooden Camera Battery Slide Pro V-Mount for Sony FX9
- Attaches to the Rear of the Camera.
- Supports V-Mount Battery.
- Access to BP-U Battery Allows Hot Swaps.
- 3 D-Tap Ports & Protective Digital Fuse.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$699.00
Wooden Camera Battery Slide for RED KOMODO Camera (Gold Mount)
- Accepts Gold Mount Batteries
- For RED KOMODO Camera
- D-Tap Accessory Port
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$730.00
Wooden Camera Top Plate for Canon C70
- Top Cheese Plate for Canon C70
- 1/4"-20 and 3/8"-16 Mounting Threads
- ARRI-Style Accessory Threads
- Offset Shoe and Canon Accessory Mounts
- Durable Aluminium Construction
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$485.00
Wooden Camera Ultra Arm Monitor Mount (1/4"-20 to 1/4"-20, 5")
- Flexible accessory positioning
- Non-slip rubber pads
- 289 mm at full extension
- Interchangable components
- Ideal for LCD attachment
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$285.00
Wooden Camera Pro V-Mount Battery Plate
Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$325.00
Wooden Camera Unified VCT-14 Tripod Plate
- Sony VCT-14 standard
- All-metal construction
- 1/4-20 and 3/8-16 holes
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$465.00
Wooden Camera Cage for Panasonic BGH1
- Formfitting, Open-Style Camera Cage
- 1/4"-20 & 3/8"-16 Accessory Threads
- NATO Rail on Side with Safety Pin
- Arca-Type Top Slot & Dovetail Plate
- ARRI-Style Anti-Twist Locating Holes
- Pass-Through Cable Management Side Slot
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$515.00
Wooden Camera Arca-Swiss Style Top Handle Kit for RED KOMODO
- For RED KOMODO Camera
- Arca-Swiss Style Top Handle
- Arca-Swiss Style Baseplate
- Single Rod & 15mm LWS Rod Brackets
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$485.00
Wooden Camera V-Mount Battery Plate for Sony FS7, FS5, Panasonic EVA1 Cameras
- IDX-V-Mount battery plate
- DC connector
- Two D-Tap connectors
- Minimal cable excess
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$299.00
Wooden Camera ARRI-Style Rosette Handgrips (Pair, Black Rubber)
- Add a Pair of Handgrips to Your Rig
- ARRI-Style Rosette
- Textured Black Rubber Grip
- Secures with M6 Locking Screw
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$315.00
Wooden Camera RED Male LEMO to Female Pogo DSMC2 LCD/EVF Cable (12"/0.3m)
- For Display to Easy Top/LEMO Adapter A
- Flexible Braided Cable
- 30.5 cm Cable Length
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$335.01
Wooden Camera Top Plate for Sony FX9
- 1/4"-20 Threads; 15mm LWS Rod Mount
- 3/8"-16 ARRI Accessory Mounts
- Supports Top Handle with Communication
- Doesn't Block XDCA-FX9 Extension Unit
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$469.00
Wooden Camera 2-Stage Clamp-On 4 x 5.65" Zip Box (110-115mm)
- Clamp-On Rubber Matte Box/Sunshade
- For 110-115mm Outside-Diameter Lenses
- Accepts Up to Two 4 x 5.65" Filters
- Wide Design Prevents Vignetting
- Durable Rubber and Stainless Steel
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$199.00
Wooden Camera WC-156700 Dovetail Clamp
- Attach Camera/Accessory to ARRI Dovetail
- Features multiple slots
- Two 3/8"-16 and two 1/4"-20 low profile screws
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$399.00
Wooden Camera WC-150900 Rosette Handle (Rubber)
- ARRI -Type Rosette
- Textured Black Rubber Grip
- Non-slip handle
- M6-threaded locking lever
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$225.01
Wooden Camera Assortment of 1/4"-20 Screws
- For Wooden Camera Handles, NATOs, Rod Clamps, Shoulder Rigs, etc.
- Collection of common 1/4"-20 screws
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$27.95
Wooden Camera WC-151100 8" Safety Dovetail Plate
- Threaded 1/4-20 & 3/8-16 Holes
- Safety Catch Prevents Camera Detachment
- Stopper screw on one end
- Accessory mounting and tripod attachment
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$290.00
Wooden Camera Rosette Bracket
- ARRI standard rosettes
- 1/4"-20 holes for attaching accessories to top
- Pass-through holes to attach to baseplate systems
- Thumbscrew to clamp onto 15mm rods
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$299.00
Wooden Camera D-Tap Power Cable for Canon C200/C200B/C300mkII (24" / 61cm)
- Power camera using any V or Gold-mount battery
- With a D-tap plug
- For Select Canon cameras
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$199.00
Wooden Camera V-Lock Base Station
- Receiver portion only
- Based on standard V-Lock
- Base station can bolt into a 1/4-20 or 3/8-16 hole
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$110.00
Wooden Camera D-Tap to RED KOMODO (36")
- Power RED KOMODO from D-Tap Power Source
- Use with V-Mount & Gold Mount Batteries
- Right-Angle Connector
- 36" Length
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$155.00
Wooden Camera Mini Top Handle for Canon C70
- Top Handle Mounts Using 1/4"-20 Screw
- Tightens via Thumbwheel
- Compatible with Canon Accessory Mount
- Multiple 1/4"-20 Mounting Threads
- 3/8"-16 ARRI-Style Accessory Mounts
- Durable Aluminium Construction
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$155.00
Wooden Camera 15mm LWS Rod Clamp for Zip Focus Follow Focus
- Fit Your Zip Focus to 15mm LWS Rods
- For Replacement or Adapting
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$99.00
Wooden Camera ARRI Accessory Mount to 15mm Rod Clamp
- Utilises ARRI Accessory Mount
- Great for top/side mounting
- Attaches to either a 1/4-20 or 3/8-16
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$140.00
Wooden Camera Universal Hot Shoe
- Auxiliary Shoe for Wooden Camera Rigs
- Non-Electronic Cold Shoe Design
- ARRI Style 3/8"-16 Connection
- Attaches with 1/4"-20 or 3/8"-16 Screw
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$63.95
Wooden Camera Coiled BNC to BNC Cable (20" to 36"/ 0.5m - 0.9m)
- Coiled HD-SDI cable
- 0.5 to 0.9 m cable
- Allow mobility and adjustment
- Suited for studio configurations
- RoHS compliant
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$59.95
Wooden Camera Mini Universal Ultra Arm (Combo 1/4-20 & 3/8-16)
- 2 x Points of Articulation
- Interchangeable Mounting Knobs
- Removable Anti-Twist Pins
- Compatible 25mm Ball System
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$170.01
Wooden Camera Plate for Touch and Go System
- For Touch and Go System
- Two 3/8"-16 Screws
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$155.00
Wooden Camera Accessory Cube (3/8"-16)
- Compact 1" Cube for Mounting Accessories
- 1 x Male 3/8"-16 Mounting Screw
- 5 x Sides with 3/8"-16 Female Threads
- Anti-Twist Divots around Threads
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$68.95
Wooden Camera Tilting Monitor Hinge Kit (3/8"-16)
- 3/8"-16 Anti-Twist Mount & 15mm Rod
- Fits 1/4"-20 Anti-Twist Monitor Thread
- Provides 180° Tilt for Optimal Viewing
- Rubber Pad Fits Standard 1/4"-20 Thread
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$140.00
Wooden Camera ARRI Accessory Mount to 19mm Rod Clamp
- Utilises ARRI Accessory Mount
- Great for top or side mounting
- Attaches to 1/4-20 or 3/8-16 mounting location
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$140.00
Wooden Camera Monitor Hinge for Canon C70
- Mount Monitor on Canon C70 Camera
- 1/4"-20 Monitor Screw & Anti-Twist Pins
- 1/4"-20 Screw with Thumbwheel Mount
- Hinge Tilts 180°
- Rubber Pad to Protect Monitor
- Compatible with Canon Accessory Mount
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$140.00
Wooden Camera SmallHD 1/4-20 to 3/8-16 ARRI Accessory Mount Adapter
- Provides an offset ARRI 3/8-16 accessory mount
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$63.95
Wooden Camera Universal Ultra Arm Ball (Combo 1/4-20 & 3/8-16)
- Interchangeable Mounting Knobs
- Removable Anti-Twist Pins
- Compatible with 25mm Ball Systems
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$70.00
Wooden Camera Director's Monitor Cage v3 Vertical Conversion Kit
- Handle Adapters
- C Stand Adapter
- 5/32 allen wrench
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$70.00
Wooden Camera Rubber Grip Set for Director's Monitor Cage V2
- Textured Rubber Grips
- Retrofit Instead of Original Wood Grips
- Instals Using 3/8"-16 Threads
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$90.00
Wooden Camera GorillaGrip Wrench Set (Standard)
- Compact, Pocket Friendly Design
- GorillaGrip Handles
- Precision-Cut Tool Tips
- Flip-and-Turn Design
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$20.95
Wooden Camera GorillaGrip Wrench Set (Metric)
- Compact, Pocket Friendly Design
- GorillaGrip Handles
- Precision-Cut Tool Tips
- Flip-and-Turn Design
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$20.95
Wooden Camera 3-Pin XLR Extension Cable (10')
- Use with ARRI Cameras and Batteries
- Male to Female 3-Pin XLR Cable
- 3 m extension cable
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$99.00
Wooden Camera Universal 15mm Rod Clamp (3/8"-16)
- Add 15mm Rod Accessory to Your Rig
- Single 15mm Rod Port
- 3/8"-16 Anti-Twist Screw
- Removable Locating Pins
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$70.00
Wooden Camera WC Coiled Right-Angle Micro HDMI to Full HDMI Cable (30cm)
- Extends from 30.5 to 61 cm
- Coiled Design Enables Cleaner Appearance
- Reduces Clutter and Tangling
- Right-Angle Micro Connector
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$35.95
Wooden Camera WC Coiled Right-Angle Micro HDMI to Micro HDMI Cable (12")
- Extends from 30.5 to 55.9 cm
- Coiled Design Enables Cleaner Appearance
- Reduces Clutter and Tangling
- Right-Angle Micro Connector
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$35.95
Wooden Camera 15mm Bolt-On Rod 1/4"-20 (1.5")
- For Modern WC Cages/Components Only
- Secure Mounting with Locating Pins
- 1/4"-20 Stud with SmallHD Pin Spacing
- 15mm Rod Diameter, Matte Black Finish
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$54.95
Wooden Camera RED V-Raptor RF To PL Pro Lens Mount Support
- For RF to LPL Mount Adapter
- Attaches directly to faceplate
- Secure and stable connection
Usually ships in 3 - 4 weeks
You Pay:
$129.00
Wooden Camera Ultra Handle Rear Upright (3/8"-16, Universal)
- Compatible with Most Rigs
- Modular Rear Handle Component
- 3/8"-16 Mounting Screw
- Multiple 3/8"-16 and 1/4"-20 Threads
- Locating Pins, Anti-Twist Pin Threads
Pre-Order
ETA to be Confirmed
Full Price:
$209.00
Deposit:
$20.00
Wooden Camera 4-Way D-Tap Splitter Cable
- Splits 1 D-Tap into 4
- 10 Amp Maximum Load
- Unregulated Voltage
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$95.00
Wooden Camera - D-Tap To Sony A9, A7RIII (Dummy NP-FZ100)
Powers the Sony A9 or A7rIII camera using any V-Mount or Gold Mount battery with a D-Tap plug
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$199.00
Wooden Camera Swing Away 4x5.65 Zip Box Pro
Lightweight and compact mattebox that holds three 10.2x14.3cm filters, attaches to 15mm lightweight rods, swings away for easy lens changes.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$795.00
Wooden Camera UMB-1 Universal Matte Box (Base)
- Fits Lenses Up to 143mm O.D.
- Two Rotating Filter Stages
- Trays Support 4 x 14.4 cm Filteres
- 15mm LWS Rod Bracket
- Universal Cloth Doughnut
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$1,865.00
Wooden Camera Top Handle V2 (2" Slotted Screw Channel)
Designed to screw directly onto the top of a camera or to a top cheeseplate
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$230.00
Wooden Camera Zip Focus Single-Rod Follow Focus (15mm LWS)
- Pivots and Adjusts to Fit Most Lenses
- 1:1 Gear Ratio
- 0.8 MOD and Friction Drive Gears
- Includes 2 Standard Marking Disks
- Hard-Stop Disk for DSLR Lenses
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$795.00
Wooden Camera Micro Battery Slide Pro for Blackmagic Pocket Cinema Camera 6K Pro (V-Mount)
- Supports V-Mount Battery
- Mounts onto Optional 15mm LWS Rods
- Power Camera with 2-Pin LEMO-Type Cable
- Can Hot Swap with Camera Battery
- Provides 14V Power to Camera
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$650.00
Wooden Camera Director's Monitor Cage v2 Male ARRI Rosette Adapter
Allows for accessories that mount via an ARRI standard rosette to be used as one the Monitor Cage's handles.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$140.00
Wooden Camera NATO Lock Clamp
- Use with RED, Zacuto, NATO, and Others
- 1/4"-20 and 3/8"-16 Mounts
- Clamp part of NATO lock kit
- Screw in accessories
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$80.00
Wooden Camera A-Box for Red One Camera
- Adapts XLR Male Plugs to Mini-XLR
- Gives you more options
- Includes a bolt-on 19mm rod
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$325.00
Wooden Camera UMB-1 Universal Matte Box (Swing Away)
- Fits Lenses Up to 143mm O.D.
- Two Rotating Filter Stages
- Trays Support 4 x 5.65" Filteres
- 15mm LWS Rod Bracket
- Swing Away Arm
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$2,795.00
Wooden Camera Complete Arca-Swiss Style Top Mount Kit for RED KOMODO
- For RED KOMODO Camera
- Onboard Monitor Hinge
- Arca-Swiss Style Top Handle
- Arca-Swiss Style Top Plate
- Arca-Swiss Style Top Mount
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$650.00
Wooden Camera Unified DSLR Cage (Small)
- For Mirrorless and Small DSLR Cameras
- Leaves Camera Grip Open
- Manfrotto Standard Quick Release
- Built-In HDMI Cable Clamp
- Lens Adapter Support
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$529.00
Wooden Camera PL Mount Modification Kit for BMPCC 6K / 6K Pro
- Replaces Original EF Mount on BMPCC 6K / 6K Pro
- Aluminium and Steel ARRI PL Mount
- Reversible Lens Mount Modification
- Includes Set of 7 Shims
- Includes All Necessary Tools
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$890.00
Wooden Camera Arca-Swiss Style Monitor Hinge Kit for RED KOMODO
- For RED KOMODO Camera
- Monitor Hinge for Onboard Monitor
- Arca-Swiss Style Top Mount
- Provides Tilt for Optimal Viewing
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$325.00
Wooden Camera D-Tap Power Cable for Blackmagic Pocket Cinema Camera 4K
For Blackmagic Pocket Cinema Camera 4K, D-Tap Connector, Straight DC Plug, Cable Length: 0.5m
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$130.00
Wooden Camera PL Mount for RED Epic/Scarlet
- Adapters RED Epic/Scarlet to PL Mount
- Works with Modified Blackmagic Cameras
- Protects RED Data Pins
- Does Not Pass Lens Data
- PL Mount Cap Included
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$650.00
Wooden Camera 15mm Rod Clamp to Hot Shoe Mount
- Standard hot shoe
- 15mm rod opening
- Attach to single rod
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$99.00
Wooden Camera Shoulder Rig v3 (Base, Rubber)
Includes a larger and more durable shoulder pad, lighter weight design, and an integrated kickstand for setting the rig down.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$799.00
Wooden Camera Canon 5D Mark IV/Mark III Unified Accessory Kit (Advanced)
- Cage for Canon 5D Mark IV/III Cameras
- Slew of 1/4"-20 & 3/8"-16 Threaded Holes
- Wood Top Handle with 15mm Rod Clamp
- Leaves Camera Grip Unobstructed
- Manfrotto Standard Quick Release
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$1,495.00
Wooden Camera Universal Lens Support (15mm LW)
- 15mm LWS Compatible
- Includes 1/4"-20 and 3/8"-16 Caps
- Includes Universal Y-Bracket
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$459.00
Wooden Camera Universal Offset Bracket
- Mounts to ARRI-Style Accessory Mount
- Also Compatible with 1/4"-20 and 3/8"-16
- 10 cm Offset
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$105.00
Wooden Camera Unified Accessory Kit for Blackmagic Pocket Cinema Camera 6K Pro (Base)
- 15mm LWS Baseplate with Dovetail Plates
- Camera Cage, Compact Top Handle
- Two 12" (30.5cm) Long 15mm Rods
- 1/4"-20 and 3/8"-16 Mounting Threads
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$1,375.00
Wooden Camera 15mm Rod Clamp
- Adds 1/4"-20 Threads to Camera Rig
- Accepts Cheese Plates and Battery Plates
- Supports WC's QB Battery Back Plates
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$160.00
Wooden Camera Shoe Handle Mount
- Attaches C100/300/500 Handles & Monitors
- Attaches Accessories & Articulating Arms
- 1/4" center thread
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$70.00
Wooden Camera WC-150600 Rosette Arm
- For ARRI-Compatible Rosette Equipment
- M6 adjustable thumbscrew
- ARRI-standard rosettes on opposite ends
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$395.00
Wooden Camera WC-142000 1/4-20 Shoe Mount
- Mounts to Most 1/4"-20 Sockets
- Replicates a Standard Cold Shoe
- Compatible with Blackmagic Cameras
- Supports Monitors, Microphones, & More
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$44.95
Wooden Camera 114mm Clamp On 4x5.65 Zip Box Pro
Lightweight and compact, clamp-on mattebox for 114mm diameter lenses which can hold three 4x5.65 filters.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$650.00
Wooden Camera 145500 3/8-16 Bridgeplate Screw
- For Mounting Bridgeplates to Cameras
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$22.95
Wooden Camera Top Plate for Canon C300 Mark II Camera
- Mount Accessories to Your C300 Mark II
- 1/4"-20, 3/8"-16, ARRI Standard Threads
- Includes Mounting Hardware & Shoe Mount
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$315.00
Wooden Camera UFF-1 Universal Follow Focus (Pro)
- Double-Sided Follow Focus
- Universal Rod Clamp
- For Lightweight or Studio Setups
- Includes 10 Marking Disks
- Includes Hard-Stop Disks
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$3,595.00
Wooden Camera Unified Baseplate for URSA Mini, F55, F5
- 15mm Rod Support / Correct Lens Height
- Vertical Rod Port (Lens Adapter Support)
- Two Quick Release Options
- Use with Bridgeplates, Gimbals, Etc.
- Centre Camera Slot for Multiple Screws
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$799.00
Wooden Camera Rosette Arm (Short)
- 3.9" ARRI-Standard Rosette Extension
- M6 Thumbscrew and Threaded Hole
- 3/8"-16 & 1/4"-20 Accessory Threads
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$245.00
Wooden Camera Unified Baseplate for FS7, C100 Mk II, C300 Mk II, C100/C300/C500
- 15mm Rod Support / Correct Lens Height
- Vertical Rod Port (Lens Adapter Support)
- Two Quick Release Options
- Use with Bridgeplates, Gimbals, Etc.
- Centre Camera Slot for Multiple Screws
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$799.00
Wooden Camera Vertical Camera Bracket
- L-Shaped Camera Bracket
- Multiple 1/4"-20 and 3/8"-16 Threads
- Multiple Pass-Through Slots
- Durable Aluminium Construction
- Four Low-Profile Screws Included
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$475.00
Wooden Camera D-Tap to Canon 5DmkIV, 5DmkIII, 5DmkII, 6D, 7D, 7DmkII, and BMMCC Power Input (20")
- Cable regulates power from D-Tap
- Cable length of 508 mm
- Power camera using any V or Gold mount battery
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$199.00
Wooden Camera Shoulder Rig v3 (Base, Leather)
Lightweight ARRI-Standard Dovetail, NATO Rail Crossbar Adjusts Left/Right, ARRI Rosette Handles with Leather Grips, Improved Dovetail Latch Mechanism
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$799.00
Wooden Camera UFF-1 Universal Follow Focus (Base)
- Single-Sided Follow Focus
- Universal Rod Clamp
- For Lightweight or Studio Setups
- Includes 2 Marking Disks
- Includes Hard-Stop Disk
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$2,345.00
Wooden Camera WC-144600 B-Box for RED Epic & Scarlet Cameras
- Sync Port Breakout Box for Epic/Scarlet
- BNC Ports for Timecode, Genlock, Trigger
- Includes Rod Clamp Attachment & 19mm Rod
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$650.00
Wooden Camera D-Tap Power Cable for RED Epic/Scarlet (15")
- D-Tap (P-Tap) Connector
- Right Angle DC Plug
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$220.00
Wooden Camera Blackmagic Pocket Cinema Camera 4K Unified Accessory Kit Advanced
BMPCC 4K Support Package, Formfitting Cage with Wooden Handle, 15mm DSLR Quick Release Baseplate, 2 x 12" 15mm Rods, 3" Ultra Arm Monitor Mount
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$1,595.00
Wooden Camera Teradek Mounting Bracket for V-Lock Accessory Wedge
Mounting shelf and rear bracket for attaching a Teradek or third party wireless transmitters to a V-Lock Accessory Wedge
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$190.00
Wooden Camera Offset V-Lock Accessory Wedge & Base Station Kit
Quick release set based on the standard V-Lock or V-Dock
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$220.00
Wooden Camera Top Plate (Sony Venice)
- For the Sony Venice
- 1/4-20 holes - in standard spacing
- 3/8-16 holes - in ARRI standard spacing
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$485.00
Wooden Camera Master Top Handle for RED DSMC2
- Modular handle system
- For Larger camera building
- Back of camera operation
- Three extension lengths
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$1,595.00
Wooden Camera D-Tap to Panasonic GH5, GH4, and GH3 Power Input (20")
- 406 mm cable length
- D-Tap plug
- Cable regulates power
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$199.00
Wooden Camera Tripod Head Pan Bar to ARRI Rosette
- Clamps onto any pan bar
- 3.81 in diameter
- ARRI Standard rosette
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$250.00
Wooden Camera 2-Stage Clamp-On 4 x 5.65" Zip Box (80-85mm)
- Clamp-On Rubber Matte Box/Sunshade
- For 80-85mm Outside-Diameter Lenses
- Accepts Up to Two 101.6 x 143.5 mm Filters
- Wide Design Prevents Vignetting
- Durable Rubber and Stainless Steel
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$199.00
Wooden Camera 19mm Rod Clamp with Arri Rosette
- Attach single ARRI handgrip to 19mm rod
- Create compact configuration
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$140.00
Wooden Camera Canon EOS R Unified Accessory Kit Base
For Canon EOS R Digital Camera, Small Unified DSLR Cage, Unified DSLR 15mm Baseplate, 2 x 30.5cm Long 15mm Rods
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$970.00
Wooden Camera WC-151500 Safety Rail (5.91"/150mm)
- NATO Standard Rail
- For Mounting NATO-Compatible Accessories
- Spring-Loaded Safety Stops on Each End
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$160.00
Wooden Camera Pro Accessory Kit for RED KOMODO (V-Mount)
- For RED KOMODO Camera
- 15mm LWS Baseplate/Riser
- V-Mount Pro Battery Slide
- Top Handle, Arca-Swiss Mount
- 2 x 12" 15mm Rods
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$2,335.00
Wooden Camera D-Box Plus for Ursa Mini Pro 12K (V-Mount)
- Power Distribution & Breakout Box
- V-Mount Plate + Side Plate Design
- 4-Pin XLR Input for Hot-Swapping
- D-Tap, 2-Pin LEMO & Fischer Outputs
- 1 x LANC Input, Fischer Trigger Control
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$2,095.01
Wooden Camera Kit with Four 2-Stage Zip Boxes & Adapter Rings (4 x 5.65")
- 80-85/90-95/100-105/110-115mm Zip Boxes
- Each Accepts Up to Two 4 x 5.65" Filters
- Wide Design Prevents Vignetting
- Durable Rubber & Stainless Steel
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$650.00
Wooden Camera WC-154700 Universal Baseplate
- Adjustable-Height Baseplate/Riser
- Supports 15mm Accessory Rods
- 3 Sets of Riser Posts Included
- Works Lengthwise or Widthwise
- Compatible with ARRI-Style Baseplates
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$790.00
Wooden Camera B-Box for RED KOMODO
- EXT Port Breakout Box for KOMODO
- R/S, Timecode, Control 5V USB & Genlock
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$730.00
Wooden Camera Half Cage for Sony FX3/FX30
- Half Cage for Sony FX3 or FX30
- Arca-Type Mounting Plate
- Multiple 3/8"-16 and 1/4"-20 Threads
- Two Camera Screws, HDMI Cable Clamp
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$320.00
Wooden Camera GorillaGrip Wrench Set (Star)
- Compact, Pocket Friendly Design
- GorillaGrip Handles
- Precision-Cut Tool Tips
- Flip-and-Turn Design
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$30.95
Wooden Camera V-Mount (Sony A9, A7RIII, Dummy NP-FZ100)
Utilizes an IDX V-Mount and Sony A9 / A7rIII connector with a regulator integrated in the plate that provides correct voltage
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$399.00
Wooden Camera Canon BP-955 Battery Slide Extension for RED KOMODO Camera
- Requires RED KOMODO Battery Slide
- Supports Canon BP-955 for Hot Swaps
- For Gold or V-Mount Battery Slide
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$80.00
Wooden Camera Easy Riser Plate for Select RED Cameras
- For RED Weapon, Scarlet Weapon, & Raven
- Compatible with Select Bridgeplates
- Includes Captured 3/8"-16 Riser Screws
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$260.00
Wooden Camera Universal Ultra Arm with Combo 1/4-20 & 3/8-16 (3")
- 4 Points of Articulation
- Interchangeable Mounting Knobs
- Removable Anti-Twist Pins
- 1/4"-20 and 3/8"-16 Centre Threads
- Compatible 25mm Ball System
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$285.00
Wooden Camera 19mm Bolt-On Accessory Rod Kit (3/8"-16)
- 1.5, 3 & 5" Length Bolt-On 19mm Rods
- For 3/8"-16 Anti-Twist Threads
- Secure Mounting with Locating Pins
- For Mounting Lens Motors, Handles & More
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$175.00
Wooden Camera Easy-Load 12" ARRI-Standard Dovetail Plate (Oconnor 2575, 2065, 120EX)
- 12" Long Sliding Bridge Plate Support
- Safety Catches Add Security at Ends
- 3/8"-16 & 1/4"-20 Mounting Threads
- Native Support for Oconnor Heads
- Attaches to Tripod Quick Release Plate
- Durable Aluminium Construction
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$799.00
Wooden Camera Mini Monitor Hinge for Canon C300 Mark III and C500 Mark II
- Instal Canon LCD on Body or Top Handle
- Provides Rotating Hinge Mount
- Instals Using 1/4"-20 Captive Screw
- 1 x 3/8"-16 Accessory Thread
- Can Instal with Microphone Mount Screw
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$235.00
Wooden Camera 19mm Bolt-On Rod with 3/8"-16 Mount (3")
- For 3/8"-16 Anti-Twist Threads
- Secure Mounting with Locating Pins
- 19mm Rod Diameter, 3" Length
- For Mounting Lens Motors, Handles & More
- Matte Black Finish
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$68.95
Wooden Camera Unified Accessory Kit for Sony PXW-FX9 (Base)
- Unified Baseplate
- Two 12" Long 15mm Rods
- Top Cheese Plate, Top Handle v2
- 1/4"-20 and 3/8"-16 Mounting Threads
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$1,690.00
Wooden Camera Unified Accessory Kit for Sony PXW-FX9 (Advanced)
- Unified Baseplate, Two 15mm Rods
- Top Plate with LCD Bracket Adapter
- Wood Top Handle with NATO Rail
- Safety Dovetail
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$2,190.00
Wooden Camera Arca-Swiss Style Top Plate for RED KOMODO
- For RED KOMODO Camera
- Arca-Swiss Style Cheese Plate
- Multiple 1/4"-20 & ARRI 3/8"-16 Threads
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$80.00
Wooden Camera Adapter Set for Dual Director's Monitor Cage V3
- Connect Two Director's Monitor Cage v3
- Two Adapters for Top and Bottom
- Connects the Two 15mm Rods
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$99.00
Wooden Camera Arca-Swiss Style Monitor Hinge for RED KOMODO
- For RED KOMODO Camera
- For Onboard Monitor
- Provides Tilt for Optimal Viewing
- Arca-Swiss Style Mount
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$140.00
Wooden Camera RED KOMODO Timecode I/O Cable (12")
- 12" Long
- Inward Right-Angle Cable
- Push-Pull Cable Locking Mechanism
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$199.00
Wooden Camera D-Tap Power Cable for Sony FX9
- Regulated Power Cable
- Converts Voltage for Use with FX9
- 20" Long
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$245.00
Wooden Camera Arca-Swiss Style Top Plate Kit for RED KOMODO
- For RED KOMODO Camera
- Arca-Swiss Style Top Plate
- Arca-Swiss Style Baseplate
- Multiple Accessory Threads
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$285.00
Wooden Camera ARRI-Style Rosette Handgrips (Pair, Brown Leather)
- Add a Pair of Handgrips to Your Rig
- ARRI-Style Rosette
- Contoured Brown Leather Grip
- Secures with M6 Locking Screw
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$315.00
Wooden Camera Arca-Swiss Style Top Handle for RED KOMODO
- For RED KOMODO Camera
- Single & Dual 15mm Rod Brackets
- 1/4"-20 & 3/8"-16 Anti-Twist Threads
- 2 x Cold Shoe Mounts
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$325.00
Wooden Camera Top Plate for Canon C500 Mark II
- Top Cheese Plate
- 1/4"-20 and 3/8"-16 Mounting Threads
- ARRI-Style Accessory Threads
- LCD/EVF Bracket Adapter
- Durable Aluminium Construction
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$485.00
Wooden Camera D-Box Power Distribution Adapter Box for ARRI Alexa Mini (V-Mount)
- For Alexa Mini
- Custom version of D-box
- Power distribution
- Standardised remote start/stop
- Hot swap abilities
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$1,940.00
Wooden Camera Touch and Go Receiver/Plate System
- For Oconnor, Sachtler 35, Ronford-Baker
- Receiver
- Plate
- 2 x 3/8"-16 Screws
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$650.00
Wooden Camera 19/15mm Studio Rod Clamp for Zip Focus Follow Focus
- Fit Zip Focus to 19/15mm Studio Rods
- For Replacement or Adapting
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$99.00
Wooden Camera D-Box for Sony Venice (Gold Mount)
Highest quality Anton Bauer components are used in the Gold Mount assembly and the unibody power plate design is extremely durable and lightweight
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$3,235.00
Wooden Camera Unified Camera Cage for BMPCC4K with Wooden Handle
For Blackmagic Pocket Cinema Camera 4K, Keeps Camera Grip & Left Side Accessible, Manfrotto Quick Release Dovetail, 1/4"-20 Lens Adapter Support
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$565.00
Wooden Camera Unified Camera Cage for BMPCC4K with Rubber Handle
For Blackmagic Pocket Cinema Camera 4K, Keeps Camera Grip & Left Side Accessible, Manfrotto Quick Release Dovetail, 1/4"-20 Lens Adapter Support
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$565.00
Wooden Camera Power Extension for Blackmagic Pocket Cinema Camera 4K
Power cable that extends any Blackmagic Pocket Cinema Camera 4K battery plate or AC adapter by 0.91 meters
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$130.00
Wooden Camera Blackmagic Pocket Cinema Camera 4K Unified Accessory Kit (Base)
Blackmagic Pocket Cinema Camera 4K Support Package, Formfitting Cage with Wooden Handle, 15mm DSLR Quick Release Baseplate, 2 x 30.5cm 15mm Rods
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$1,055.00
Wooden Camera Horseshoe Mounting Bracket for VX Skateboard Camera Mic
- Mount More Accessories on Your Camera
- Curved Style Fits VX Skateboard Mic
- Secures to Camera Shoe Mount
- 3 x Shoe Mounts, 1 x 1/4"-20 Thread
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$70.00
Wooden Camera Long Rod Support Bracket (19mm)
- Support for Long 19mm Rods
- Prevent Lens or Camera Drooping
- Slides on ARRI-Standard Dovetail
- Friction Keeps Bracket in Place
- Durable Metal Construction
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$140.00
Wooden Camera Long Rod Support Bracket (15mm)
- Support for Long 15mm Rods
- Prevent Lens or Camera Drooping
- Slides on ARRI-Standard Dovetail
- Friction Keeps Bracket in Place
- Durable Metal Construction
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$140.00
Wooden Camera Clamp-On Back for Zip Box Pro 4 x 5.65" Matte Box (104mm)
- Compatible with Zip Box Pro 4 x 5.65"
- Fits 104mm Lens
- Interchangeable Back
- Clamp-On Style
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$245.00
Wooden Camera Clamp-On Back for Zip Box Pro 4 x 5.65" Matte Box (95mm)
- Compatible with Zip Box Pro 4 x 5.65"
- Fits 95mm Lens
- Interchangeable Back
- Clamp-On Style
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$245.00
Wooden Camera Clamp-On Back for Zip Box Pro 4 x 5.65" Matte Box (80mm)
- Compatible with Zip Box Pro 4 x 5.65"
- Fits 80mm Lens
- Interchangeable Back
- Clamp-On Style
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$245.00
Wooden Camera Zip Box Pro 4.5" Round Filter Stage
- Fits up to 114mm Zip Box Pro Matte Boxes
- For 4.5" Round Filters up to 8mm Thick
- Position Adjustment Thumbwheel
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$250.00
Wooden Camera Universal ARRI Rosette Rod Bracket
- 15mm LWS, 15mm Studio, 19mm Studio Ports
- ARRI Rosettes for Handgrips/Accessories
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$315.00
Wooden Camera Drive Gear for UFF-1 Universal Follow Focus (0.8 MOD, 43-Tooth)
- Large-Diameter Gear for Cine Lenses
- 0.8 MOD gearing
- 43 Gear teeth
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$140.00
Wooden Camera E-Mount to PL-Mount Adapter for Sony FS5
- Adapts Sony FS5 E-Mount to ARRI PL Mount
- Removable Support Brace
- Includes Set of Shims
- Includes PL Lens Port Cap
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$799.00
Wooden Camera UMB-1 Matte Box Clamp On Ring (143-136mm)
- For UMB-1 Matte Boxes
- For lens with 136mm Outer Diameter
- Made from ABS Plastic
- Split Ring with Baffles
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$135.00
Wooden Camera UMB-1 Matte Box Clamp On Ring (143-134mm)
- For UMB-1 Matte Boxes
- For lens with 134mm Outer Diameter
- Made from ABS Plastic
- Split Ring with Baffles
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$135.00
Wooden Camera UMB-1 Matte Box Clamp On Ring (143-125mm)
- For UMB-1 Matte Boxes
- For lens with 125mm Outer Diameter
- Made from ABS Plastic
- Split Ring with Baffles
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$135.00
Wooden Camera UMB-1 Matte Box Clamp On Ring (143-110mm)
- For UMB-1 Matte Boxes
- For lens with 110mm Outer Diameter
- Made from ABS Plastic
- Split Ring with Baffles
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$135.00
Wooden Camera UMB-1 Matte Box Clamp On Ring (143-87mm)
- For UMB-1 Matte Boxes
- For lens with 87mm Outer Diameter
- Made from ABS Plastic
- Split Ring with Baffles
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$135.00
Wooden Camera UMB-1 Matte Box Clamp On Ring (143-80mm)
- For UMB-1 Matte Boxes
- For lens with 80mm Outer Diameter
- Made from ABS Plastic
- Split Ring with Baffles
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$135.00
Wooden Camera Crank for UFF-1 Universal Follow Focus
- Use with UFF-1 follow focus
- Fits into the hand wheel accessory port
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$169.00
Wooden Camera Dual Director's Monitor Cage v2 Adapter Set (Adapter Set Only)
- For Director's Monitor Cage v2 (DMCv2)
- Enables Vertical Stacking of DMCv2
- Enables Horizontal Stacking of DMCv2
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$70.00
Wooden Camera Ultra Arm Ball (Female Hot Shoe)
- Component of Ultra Arm
- Accepts any shoe-mount accessory
- 25mm ball on one end
- For use with Select Canon cameras
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$70.00
Wooden Camera Trigger Handle for Select RED Cameras
- For select RED cameras
- Tool-less attachment
- Attaches to top of camera brain
- Trigger camera through pogo interface
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$565.00
Wooden Camera 4-Pin XLR Extension Cable (10')
- Use with 4-pin XLR Camera Adapter Cables
- Male to Female 4-Pin XLR Cable
- Cable length of 3 m
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$99.00
Wooden Camera D-Tap to ALEXA Mini Braided Flex Cable
- Power ALEXA Mini from D-Tap Power Source
- Use with V-Mount & Gold Mount Batteries
- Flexible Design
- Insulated Wires in Braided Nylon Sheath
- Right-Angle LEMO-Type Connector
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$285.00
Wooden Camera Crossbar V2 Kit
- NATO Rail
- Safety Pins
- Attach accessories
- Pass-through slots
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$470.00
Wooden Camera Top French Flag for UMB-1 Universal Matte Box
- Folding French flag
- For Universal Matte box
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$180.00
Wooden Camera Bottom Flag for UMB-1 Universal Matte Box
- Attaches to UMB-1 matte box
- Blocks light from below
- Thumb knobs
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$225.01
Wooden Camera WC Super Clamp
- Universal clamping jaw
- 1/4"-20 and 3/8"-16 threaded holes
- Suitable for NATO lock and Magic arm
- Position accessories
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$130.00
Wooden Camera Blackmagic URSA Mini/Mini Pro Unified Accessory Kit (Base)
- Supports 15mm LWS rods
- Anti-twist, non-slip rubber surface
- Two quick release options
- For URSA mini and mini pro
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$1,680.00
Wooden Camera Battery Swing
- Holds V-Mount or Gold Mount Plates
- Swings Away from the Camera
- Allows Rear Camera Access
- Modular Rod Clamp
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$565.00
Wooden Camera Ultra Arm with NATO Lock (8")
- For Attaching Accessory to Camera
- 20.32 cm Extension
- Two Sets of 1" Double Ball Joints
- NATO Standard Quick Release
- 1/4"-20 and 3/8"-16 Mounting
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$465.00
Wooden Camera Ultra Arm with NATO Lock (5")
- For Attaching Accessory to Camera
- 12.7 cm Extension
- Two Sets of 25mm Double Ball Joints
- NATO Standard Quick Release
- 1/4"-20 and 3/8"-16 Mounting
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$445.01
Wooden Camera Unified Baseplate for C200/C200B/C700
- 15mm Rod Support / Correct Lens Height
- Vertical Rod Port (Lens Adapter Support)
- Two Quick Release Options
- Use with Bridgeplates, Gimbals, Etc.
- Centre Camera Slot for Multiple Screws
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$799.00
Wooden Camera Low Mode V-Mount Adapter for RED DSMC2
- Lower position of brick battery
- Allows installation of taller batteries
- Utilises an IDK brand plate
- Provides two D-Taps
- Attaches without tools
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$399.00
Wooden Camera Clamp-On Set for UMB-1 Universal Matte Box
- Clamp-On reduction rings
- Convert base or swing away versions
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$709.00
Wooden Camera WC-145200 Bolt-On Rosette Plate (RED Standard)
- Aluminium Construction
- 1/4"-20 Internal Threads
- 43 mm spaced female sockets
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$160.00
Wooden Camera Adjustable Handle (Rosette)
- 25mm Kipp Handle
- Use with Bridgeplates & NATO Clamps
- Also for LW15mm Bracket & Top Mount
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$44.95
Wooden Camera 2060/2575/120EX Dovetail Plate for OConnor Tripods (18")
- ARRI Standard Mounting Plate
- Safety Catches on Each End
- Fits OConnor 2060, 2575, 120EX
- Fits Sachtler Cine 30
- Attaches to Most Tripods Head via Screws
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$865.00
Wooden Camera D-Tap to Epic/Scarlet/Dragon/Weapon Braided Flexible Cable (36" / 91cm)
- Great for gimbal use
- For select RED cameras
- Power camera using V or gold-mount battery
- Cable length of 91 cm
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$250.00
Wooden Camera Handgrip (Left)
- Ergonomic wooden handgrip
- ARRI standard and M6 thumbscrew attachment
- Optional addition of start/stop trigger
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$304.00
Wooden Camera 15mm LWS Rods Bracket for RED Weapon Camera
- Pair with Easy riser
- For lightweight 15 mm rods
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$230.00
Wooden Camera Handgrip Relocator with ARRI Rosette for Canon C100/C100 MkII/C300/C500
- Provides comfortable handheld shooting
- Connector interface passes controls back to body
- For select Canon cameras
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$485.00
Wooden Camera A-Box Conversion Kit for RED Epic/Scarlet to Weapon/Scarlet-W/Raven
- Convert any A-Box
- Professional grade connectors
- Does not provide phantom power
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$155.00
Wooden Camera Ultra Arm Monitor Mount (1/4"-20 to 1/4"-20, 8")
- Two sets of 24mm ball joints
- flexible positioning
- Tool-less knobs at each end
- Non-slip rubber pads
- Quick and easy set-up
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$295.00
Wooden Camera Preston Micro Force to ARRI Rosette
- Attach to Preston Micro Force 2
- Attach to Preston Micro Force V +F3
- Attach to Preston Micro Force 3
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$299.00
Wooden Camera Tool-Less LCD/EVF Adapter for WEAPON/EPIC/SCARLET/RAVEN
- Adjust RED LCD/EVF Without Tools
- Adds 1/2" in Height to Monitor
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$230.00
Wooden Camera Rosette Side Plate for Blackmagic URSA Mini/Mini Pro
- Adds Accessory & Handle Mounting Options
- Multiple 1/4"-20 & 3/8"-16 Holes
- Several 3/8"-16 Holes with Locating Pins
- Attaches to the Right Side of the Camera
- Lightweight aluminium construction
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$245.00
Wooden Camera Smartphone Clamp
- Universal smartphone holder
- Holds up to iPhone 6s
- Quick and easy installation
- 1/4-20 hole on back
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$155.00
Wooden Camera Right Side Plate for Select RED Cameras
- For Mounting Handgrip and Accessories
- For RED WEAPON, EPIC, SCARLET, & RAVEN
- Multiple 1/4"-20 Holes in RED Spacing
- Two 3/8"-16 ARRI Accessory Holes
- Attaches to Right Side of RED Camera
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$245.00