Signal Processing & Distribution

• 100% Passive Analog Circuitry
• Switch Between 2 Amps or Use Both
• Iso-Transformer & Ground-Lift
• 180° Polarity Switch
• Dedicated Tuner Output
• LEDs Powered by 9V Battery or Power Jack

• 2 Passive FX Loops Wired in Series
• True-Bypass Signal Path
• Ground-Lift Switch on Each Loop Path
• Mute Switch on Loop 2 for Silent Tuning
• Bright LED Status Indicators
• Switch Noisy Pedals out of Your Chain

• 2-Channel DI Box
• Fits Single-Gang Electrical Plate
• 2x RCA Inputs
• 1x 3.5mm Stereo TRS Input
• Drives Cables up to 91.5m

• Compliant with Fiber/SDI SMPTE 297M-2006
• Single-Mode Fiber Duplex Transmission
• I2C Bus Interface
• Up to 20km Transmission Distance
• Non-MSA Pinout
• Compatible with SFP MSA and SFF-8472

Compliant with Fibre/SDI SMPTE 297M-2006 Single-Mode Fibre Duplex Transmission I2C Bus Interface Up to 20 kg Transmission Distance Non-MSA Pinout Compatible with SFP MSA and SFF-8472

• SFP+ Module with PIN Photodiode
• Optical SDI to Electrical Conversion
• Support for SDI Pathological Patterns
• Operating Data Rate up to 11.88 Gb/s
• Hot Pluggable SFP+ LC Connector
• Single-Mode Transmission up to 10km

• 100% Discrete Class-A Buffer
• Drag Control Load Correction
• Drives Pedals to 1.52m
• Converts Two 9V Supplies to 15 VDC

• Eliminates Hum and Buzz
• Supports Hi or Lo-Z Inputs & Outputs
• 1/4" I/O
• Able to Convert Hi and Lo-Z Signals
• Balanced and Unbalanced Signals
• Phase Reverse for Phase Alignment