Radial Engineering BigShot EFX Effects Loop Switcher

Product #96215 | SKU RA-BIGSHOT-EFX | Radial
In stock Ships direct today
Our Price $379.00 AUD
In stock Ships direct today
- +

this item may be nonreturnable
Shipping & Availability
Ships today. Deliver to New South Wales for $5.90 Change location
Click & Collect Availability
Sydney Out of stock. Pickup in 2 - 3 working days
Click & Collect


  • 2 Passive FX Loops Wired in Series
  • True-Bypass Signal Path
  • Ground-Lift Switch on Each Loop Path
  • Mute Switch on Loop 2 for Silent Tuning
  • Bright LED Status Indicators
  • Switch Noisy Pedals out of Your Chain


The Radial Engineering BigShot EFX Effects Loop Switcher lets you route pedals into different paths and switch them in and out of your effects chain at will. It features passive true-bypass circuitry, so that when a pedal loop is disengaged from the chain, it’s as if the pedals aren’t there at all. Thus, a pedal that produces noise even in its bypassed state can be routed into one of the BigShot EFX's loops for quiet operation when disengaged.

Would you like to instantiate a modulation effect, a distortion, and a delay—all with one stomp of the foot? Simply loop those pedals into one of the paths provided, leave them on, and step on the BigShot EFX's foot-switch when you’re ready to turn on all three pedals. In this way, you can eliminate tap-dancing on stage and concentrate more on delivering your best performance. Loop 2 of the BigShot EFX also provides a mute toggle switch, so you can route signal to a tuner, mute the output of the BigShot EFX and kill sound going to the amp, and tune your instrument in silence. If you experience any hum or buzzing issues, flip the ground-lift toggle switch of either loop to eliminate the problem.

The BigShot EFX is housed in a 14-gauge steel chassis to promote durability, and, at 3.6” x 4” x 2”, it won’t take up too much room on your pedal board. The pedal itself employs a passive circuitry, but to utilise its onboard LED indicators, you’ll need a power supply, available separately.


Circuit Type Passive, true-bypass
Frequency Response 20 Hz to 20 kHz @ -0.3 dB, <1° phase response
I/O 1 x 1/4" Instrument input, phone type
2 x 1/4" Return inputs, phone type
2 x 1/4" Send outputs, phone type
1 x 1/4" Instrument output, phone type
Switching 100% passive
LED Indicators Large 3 mm OD ultra-bright LEDs
Ground Lift Lifts Pin 1 for return 1 and return 2
Mute Changes foot-switch 2 to a mute switch for silent tuning through Loop 2
Power Supply 9 VDC, centre pole negative
Construction 14-gauge steel
Finish Powder coat
Operating Conditions For indoor use at temperatures between 5 to 40°C
Dimensions 9.1 x 9.9 x 5.1 cm
Weight 0.6 kg

In The Box

  • Radial Engineering BigShot EFX Effects Loop Switcher


0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review


  • Product: Radial Engineering BigShot EFX Effects Loop Switcher
  • Manufacturer: Radial
  • RM Product #: 96215
  • Warranty: 5 year manufacturer warranty

Recently Viewed

View All