DPA Microphones d:vote 4099G Clip Microphone for Guitars with XLR Adapter has been discontinued, here are some related products you might like:
DPA Microphones d:vote 4099G Clip Microphone for Guitars with XLR Adapter
Overview
Description
The d:vote 4099G Clip Microphone for Guitars with XLR Adapter from DPA Microphones is designed to clip onto different members of the acoustic guitar family including mandolins, ukuleles, and dobros with a body depth between 1.4 and 4.8". The clip can be adjusted with just one hand and can be used for both live sound and recording purposes. The microphone itself is a supercardioid condenser with a 5.5" adjustable gooseneck for ease in positioning. As the microphone is placed above the strings, it is designed to provide a more natural sound than an internally placed mic or pick-up.
The 4099G also features a detachable cable, which allows you to attach your mic to your guitar before connecting it. The 4099G terminates in a Microdot connector, allowing for compatibility with DPA's connection adapters for use with a variety of third party wireless systems. An XLR adapter with a belt clip is included for use in a wired system with 48-volt phantom power.
Specifications
Transducer Type |
Condenser |
Polar Pattern |
Supercardioid |
Principle of Operation |
Pressure Gradient |
Frequency Range |
20 Hz to 20 kHz 80 Hz to 15 kHz with 2 dB Soft Boost @ 10 to 12 kHz, Second Order Low-Cut Filter @ 80 Hz (>+/- 2 dB, 20 cm Distance) |
Sensitivity |
6 mV/Pa; -44.5 dB Reference: 1 V/Pa (Nominal, +/- 3 dB) |
Equivalent Noise Level |
Typ. 23 dB(A) Reference: 20 µPa (Maximum 26 dB(A)) (A-Weighted) |
Signal to Noise Ratio |
71 dB (Reference: 1 kHz @ 1 Pa, 94 dB SPL) |
Total Harmonic Distortion (THD) |
< 1 % up to 123 dB SPL peak < 1 % up to 120 dB SPL RMS sine |
Dynamic Range |
100 dB |
Maximum SPL |
142 dB (Peak Before Clipping) |
Output Impedance |
MicroDot: 30 to 40 Ω, XLR: 100 Ω |
Cable Drive Capability |
XLR: 984' (300 m) |
Output Balance Principle |
Signal balanced with XLR adapter |
CMRR |
XLR Adapter: > 60 dB at 50 Hz to 15 kHz |
Power Supply |
Minimum 5 V to Maximum 50 V through DPA adapter for wireless systems 48 V phantom power ±4 V with XLR adapter |
Current Consumption |
XLR Adapter: 1.5 mA; 3.5 mA |
Connector |
Microdot XLR Adapter Included |
Compatibility |
Acoustic Guitars, Mandolins, Ukuleles, Dobros with a body depth between 1.4 and 4.8" (33 and 122 mm) |
Polarity |
Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter) |
Operating Temperature |
-40 to 113°F (-40 to 45°C) |
Relative Humidity |
Up to 90% |
Cable Length |
6' (1.8 m) |
Gooseneck |
Length: 5.5" (140 mm) |
Microphone Length |
1.8" (45 mm) |
Weight |
1.27 oz (36 g) |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: DPA Microphones d:vote 4099G Clip Microphone for Guitars with XLR Adapter
- Manufacturer: DPA Microphones
- Model: VO4099G
- SKU: VO4099G
- RM Product #: 20814