IK Multimedia iRig PRO Universal Audio and MIDI Interface For iOS and Mac has been discontinued, here are some related products you might like:
IK Multimedia iRig PRO Universal Audio and MIDI Interface For iOS and Mac
Features
- Audio & MIDI Interface
- For Macs & iOS Devices
- Combo XLR/TS Audio Input
- Connect 5-Pin MIDI Devices
- Records up to 24-Bit/48kHz Audio
Description
The iRig PRO Universal Audio and MIDI Interface for iOS and Mac from IK Multimedia allows you to record audio and MIDI data from external instruments, microphones, and 5-pin DIN MIDI controllers to your Mac or compatible iOS device. It features a single combination XLR/TS input and preamp that is capable of providing 48-volt phantom power to condenser mics. Once your audio source is connected, it can be recorded to your Mac or iOS device in up to 24-bit/48kHz quality.
In addition to audio, the iRig PRO can connect to MIDI gear with the included 5-pin DIN to 2.5mm cable, allowing you to use it as a MIDI interface. IK Multimedia also includes a USB cable and Lightning cable, providing connectivity out of the box regardless of your device. It is powered by the included 9-volt battery or via USB bus power if connected to your Mac.
Features
Input Control
IK Multimedia included a control feature on iRig PRO - an input gain control knob. This lets you dial in just the right amount of input gain to give your sounds and tones just the right amount of sparkle, thump and headroom
48 Volt Phantom Power
Studio condenser microphones require 48 volts of external power to function. With iRig PRO, you can plug your condenser mic in, flip the phantom power switch and record until your heart's content. You don't need to purchase 48 volts worth of batteries; a simple standard (and included) 9 volt will work just fine for this
MIDI
The iRig PRO also functions as a plug-and-play MIDI interface. Use the included 5-pin DIN MIDI cable to connect any MIDI keyboard or other controller to your iOS device or Mac and play virtual instruments or change parameters in Core-MIDI-compatible apps and software
Included Software
For Mac: AmpliTube Metal, T-RackS CS Classic mastering suite, SampleTank XT sound workstation
For iOS: AmpliTube FREE for iOS, SampleTank FREE, iGrand Piano FREE
Additional Features
- Balanced input for a mic, line-level, or Hi-Z source, via XLR/TS combo jack connector
- Preamp gain control
- Low noise mic and instrument preamp
- MIDI IN, compatible with iRig MIDI cables
- 48V phantom power provided by included 9V battery
- Powered by mobile device or USB when plugged into Mac
- 30-pin, Lightning, USB, and MIDI cables included
Specifications
| Instrument Input | 1x 1/4" (6.3 mm) unbalanced Hi-Z TS (tip = signal, shield = ground) |
| Maximum Input Level | Instrument: 30 mVpp to 6.9 Vpp Microphone: 6 mVpp to 1.4 Vpp |
| Input Impedance | Instrument In: 620 kΩ Microphone In: 2 kΩ (approximate) |
| Microphone Input | 1x balanced XLR (pin 2 = hot, pin 3 = cold, pin 1 = ground) |
| Gain Control | Range: 47 dB |
| Phantom Power | 48 V +/-10% |
| Input Noise | -97 dB RMS, -105 dB(A) |
| Distortion (THD) | 0.01% |
| Frequency Response | 20 Hz to 20 kHz +/- 0.5 dB |
| Conversion | 24-bit A/D |
| Sampling Rate | 44.1, 48 kHz |
| Power Requirements | 1 x 9 V battery |
| System Requirements | iPhone 5, 4S, 4 iPod touch 4th and 5th generation iPad, iPad 2, iPad 3rd and 4th generation, iPad mini Mac OS X 10.5 or later with a free USB port |
| Dimensions (W x L x H) | 32 x 105 x 21 mm |
| Weight | 40 g |
In The Box
- Multimedia iRig PRO Universal Audio and MIDI Interface
- iOS Lightning Cable
- USB Cable
- 2.5mm to 5-Pin DIN MIDI Cable
- 9 Volt Battery
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: IK Multimedia iRig PRO Universal Audio and MIDI Interface For iOS and Mac
- Manufacturer: IK Multimedia
- Model: IP-IRIG-PRO-IN
- SKU: IP-IRIG-PRO-IN
- RM Product #: 13940
Recently Viewed
View AllIK Multimedia iRig PRO Universal Audio and MIDI Interface For iOS and Mac
