Mounting Hardware
Tilta Speed Rail Mounting Suction Cup Kit
- 50kg Suction Cups
- Secure & Accommodate Heavier Rigs
- For Speed Rail Car Mounting Kit or any 50mm Speed Rail
- Adjustable Clamps
- Durable Aluminium, Stainless Steel & Rubber Construction
Contact us for an ETA
You Pay:
$1,319.00
Litepanels Gemini 1x1 Pole Operated Yoke
- Allows Pan & Tilt of Light Hung Overhead.
Usually ships in 8 - 12 weeks
You Pay:
$1,299.00
Godox 4-Light Bracket for P300R & P600Bi
- Holds Four LED Light Panels
- Maximises Light Output
Usually ships in 4 - 6 weeks
You Pay:
$1,219.00
Litepanels Quad Gemini 1x1 Array Kit with Yoke
- Supports 4 Geminis in 2x2 Configuration.
- Combo 5/8" Receiver / 1 1/8" Pin.
Usually ships in 8 - 12 weeks
You Pay:
$1,149.00
Litepanels Gemini Pole Operated Yoke
Pole Operated Yoke for the Gemini only.
Usually ships in 8 - 12 weeks
You Pay:
$1,059.00
Litepanels Pole Operated Yoke for Astra 1x1 LED Light
For Control of Lights Mounted Overhead
Usually ships in 8 - 12 weeks
You Pay:
$839.00
Litepanels Dual Gemini 1x1 Array Kit with Yoke
- Supports 2 Geminis in 1x2 Configuration.
- 5/8" Receiver, Metal Construction.
Usually ships in 8 - 12 weeks
You Pay:
$769.00
Litepanels Pole Operated Yoke for Sola 12 and Inca 12
For tilt and panning control of ceiling-mounted Sola 12 and Inca 12 fixtures with a dedicated pole.
Usually ships in 8 - 12 weeks
You Pay:
$759.00
Godox 2-Light Bracket for P300R & P600Bi
- Holds Two LED Light Panels
- Maximises Light Output
Usually ships in 4 - 6 weeks
You Pay:
$719.00
Litepanels Pole Assisted Yoke for Sola 6 Fresnel
Controls Sola When Mounted Above
Usually ships in 8 - 12 weeks
You Pay:
$619.00
Fluotec Mounting Bracket with Stabilizer Arm for CineLight 120 Series
Available to order from Rubber Monkey Today.
In stock
Ships tomorrow
You Pay:
$459.00
Kupo KSC-102 Vacuum Suction Cup Mount with Cheese Plate (25cm)
- Pumping Suction Cup
- Rubber and Silicone Construction
- Payload: 15kg
- Supplied with Pad Protector
In stock
Ships direct in 2 - 3 working days
You Pay:
$439.00
Kupo KSC-101 Vacuum Suction Cup with Camera Bracket (15cm)
- Pumping Suction Cup
- Loading Weight: 6kg
- Interlocking Device for Fast Setup
- Rubber and Silicone Cup Construction
- Supplied with Pad Protector
Usually ships in 4 - 6 weeks
You Pay:
$419.00
Avenger D800KIT Grip Kit and Bag
Steel and Aluminium Alloy Construction, 40" Grip Arm, D200 Grip Head
Special Order
Contact us for an ETA
You Pay:
$419.00
Tilta Speed Rail Mounting Suction Cup (Black)
- 50kg Suction Cups
- Secure & Accommodate Heavier Rigs
- For Speed Rail Car Mounting Kit or any 50mm Speed Rail
- Adjustable Clamps
- Durable Aluminium, Stainless Steel & Rubber Construction
Usually ships in 2 - 4 weeks
You Pay:
$359.00
Tether Tools Rock Solid VESA Local Monitor Mount for Stands and Tripods
- For Small- to Medium-Sized Monitors.
- Supports 75x75 & 100x100mm VESA Patterns.
- Maximum Load Capacity of 35 lb.
- Aerospace Aluminium Alloy Construction.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$289.00
Avenger D400 4.5" Grip Head with Junior Pin
Aluminium Alloy Construction, 1 1/8" Junior Pin, 1 1/8" Receiver
Special Order
Contact us for an ETA
You Pay:
$259.00
Avenger F1000 Pump Cup with Baby Swivel Pin
Rubber and Aluminum Alloy Construction, 5/8" Pin, Pneumatic Pump
Special Order
Contact us for an ETA
You Pay:
$259.00
Avenger F831 Baby Female Swivel with Ball
Zinc-Plated Steel Construction, Double Baby Female Attachments
Special Order
Contact us for an ETA
You Pay:
$249.00
Avenger C339 Grab Clamp
Zinc Steel Construction, 12.5 mm Hole, Load Capacity: 330 lb
Special Order
Contact us for an ETA
You Pay:
$239.00
iFootage Spider Crab Vehicle Suction Cup VS-146
- For Use with Spider Crab Vehicle Mount
- Create Smooth Motion Shots on Vehicles
- 1/4"-20 & 3/8"-16 Screws/Thread Mounts
- 30 kg Maximum Payload
In stock
Ships tomorrow
You Pay:
$219.00
Kupo KCP-614 Adjustable Poly Holder
- Aluminium and Steel Construction
- Holds 3 to 5' Foamcore or Polyboard
- Extendable Clip for Floor Positioning
- 5.7"-Long 5/8" Baby Pin for Grip Heads
- U-Shaped Handle for Easy Moving
In stock
Ships direct in 2 - 3 working days
You Pay:
$209.00
Kupo KSC-10 Pump Suction Cup with 5/8" Swivel Baby Receiver (6")
- Rubber Material with Silicon
- Mounts to Smooth, Non-Porous Surfaces
- Use from 10.4 to 120 Degrees Fahrenheit
Usually ships in 1 - 2 weeks
You Pay:
$209.00
Manfrotto 241S Pump Cup with 5/8" (16mm) Socket
- 150 mm Diameter
- Takes Standard "Baby" Accessories
- 2 kg Load Capacity
Usually ships in 2 - 3 weeks
You Pay:
$199.00
Manfrotto 241FB Pump Cup with Flat Base - for Lightweight Equipment
- Replaces #3500
- With a diameter of 14.7 cm
- Accommodates most Manfrotto heads
Special Order
Usually ships in 3 - 4 weeks
You Pay:
$199.00
Litepanels Floor Stand / Hanging Bracket for Hilio D12/T12
Designed for the Hilio D12/T12 lights.
Usually ships in 8 - 12 weeks
You Pay:
$179.00
Manfrotto 241 - Pump Cup with Swivel Socket
Suction cup for small fixtures and light equipment - supports 2kg
Special Order
Usually ships in 3 - 4 weeks
You Pay:
$179.00
Manfrotto Column Clamp (349)
- Accepts 190 & 055 Series Columns
- Replaces #3424
Usually ships in 2 - 3 weeks
You Pay:
$179.00
Kupo KCP-601-L Super Viser Clamp (End Jaw, 17.5")
- Steel and Aluminium Construction
- 30kg Load Capacity
- Hex Receiver and 5/8" Knurled Pin
In stock
Ships direct in 2 - 3 working days
You Pay:
$169.00
Avenger D520LB 40" Extension Arm (Black)
Zinc-plated Steel and Aluminum Alloy Construction
Special Order
Contact us for an ETA
You Pay:
$169.00
Kupo KCP-712 Wall Spreader Set for Pipe 1-1/2" Schedule 40
- Steel Construction
- Tightens Span of Pipe Between Walls
- Can be Used Vertically or Horizontally
In stock
Ships direct in 2 - 3 working days
You Pay:
$159.00
Kupo KS-118BT Hanger for Lightweight Stands (1.2m)
- Strong, Durable Steel Construction
- Provides Storage for Light Stands
- Works with Kupo 3- and 4-Way Clamps
- Matte Black Surface Finish
- Pre-Drilled Holes for Wall-Mount Use
In stock
Ships direct in 2 - 3 working days
You Pay:
$159.00
Kessler Crane 15mm Motor Offset "Dogbone" Bracket
Available to Order From Rubber Monkey Today
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$159.00
Manfrotto 175F-2 Cold Shoe Clamp
- Cold Shoe Mount, Centre Ball Head
- Rubber Grips Prevent Scratches, 5/8" Pin
- Load Capacity: 2kg, 5/8" Receiver
- Ball Head Offers Precise Positioning
Usually ships in 2 - 3 weeks
You Pay:
$159.00
9.SOLUTIONS Suction Cup
- Load Capacity: 1.9 kg
- Equipped with Cheese Block
- Multiple 1/4"-20 & 3/8"-16 Taps
- 2 x 3/8" Rod Clamps
Usually ships in 4 - 6 weeks
You Pay:
$159.00
Manfrotto 155RC - Tilt-Top Head with Quick Plate
A versatile camera support for compact and 35mm cameras - supports 5kg
Special Order
Usually ships in 3 - 4 weeks
You Pay:
$159.00
Kupo KCP-101 Max Arm
- Adjustable Aluminium Arm
- Two Studs Attached to Ball Joints
- Central Elbow Rotates 360°
- Quick, Easy Positioning
In stock
Ships direct in 2 - 3 working days
You Pay:
$155.00
Wooden Camera 19mm Tube Clamp with Center Screw Channel
Allows attaching to holes between 25mm and 36mm apart center to center.
Usually ships in 3 - 4 weeks
You Pay:
$155.00
Kupo KCP-440 4.5" Centre Grip Head with 28mm Pin
- 2 Rotating Discs Attached to 1-1/8" Pin
- 5/8" and 3/8" V-Jaws
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$149.00
Kupo KCP-101W Max Arm with Hand Wheel
- Adjustable Aluminium Arm
- Two Studs Attached to Ball Joints
- Central Elbow Rotates 360°
- Quick, Easy Positioning
In stock
Ships direct in 2 - 3 working days
You Pay:
$149.00
Avenger D500LB 20" Extension Arm (Black)
Zinc-plated Steel and Aluminum Alloy Construction
Contact us for an ETA
You Pay:
$149.00
Impact Double Ball Joint Head with Super Clamp and Camera Platform Kit
3 piece kit to support cameras up to 2.3 kg
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$149.00
Kupo KCP-600 Super Viser Clamp (End Jaw, 10cm)
- Steel and Aluminium Construction
- 30kg Load Capacity
- Hex Receiver and 5/8" Knurled Pin
In stock
Ships tomorrow
You Pay:
$139.00
Kupo KCP-724 Wall Spreader
- Fits 2 x 4" Lumber
- Accepts Lumber at Each End of Spreader
- Steel Construction
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$139.00
Matthews Infinity Arm Anti-Rotation Tip
- 3/8” threaded pin mount with indexing pins
- Precision machined ball mount pairs with Infinity Arm
- Black anodize coating
Pre-Order
ETA to be confirmed
Full Price:
$139.00
Deposit:
$15.00
Tilta Universal Action Camera Suction Cup (4.5") Mounting Kit
- Mini Articulating Arm
- Secure Mounting to Vehicles
- Compatible with GoPro Hero 11, DJI Action 3, Insta360 X3
- Design Based on 1/4"-20 Mounting Points
- Aluminium Alloy, Rubber, and Stainless Steel Construction
Usually ships in 2 - 4 weeks
You Pay:
$139.00
Kupo KCP-806 Sidearm with Baby Pin/Receiver
- Mounts to C-Stand Riser Sections
- 5/8" Male Pin & 5/8" Female Receiver
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$139.00
Avenger F830 Baby to Junior Swivel Pin
Zinc-Plated Steel Construction, 5/8" Receiver, 5/8" Pin
Special Order
Contact us for an ETA
You Pay:
$139.00
Avenger F810 Baby Plate with 5/8" Swivel Spigot
Chrome-plated Steel Construction, Large T-Handle, 5/8" Baby Pin
Special Order
Contact us for an ETA
You Pay:
$139.00
Avenger F1100 6.0" Pump Cup with Fixed Baby Pin
Rubber and Aluminum Alloy Construction, 5/8" Non-swiveling Pin
Special Order
Contact us for an ETA
You Pay:
$139.00