Live Sound

• Measures 180mm Long
• Standard Hole Diameter 18 to 20mm

• For Lavalier Mics
• Mount Mics Silently under Clothing
• For On-Camera Interviews

• Attenuates 20dB of Wind Noise
• Protects Microphones w/ 40mm D x 55mm L

• Foam windscreen is designed to avoid high-frequency roll-off
• Up to 20dB of wind noise attenuation
• UV and moisture resistant

• Set of 100 Sticky Pads
• Secure a Lav Mic
• Hypoallergenic

• For Lavalier Mics Under Clothing
• Minimise Clothing Rustle and Wind Noise
• Includes Stickies to Affix to Your Lav

• For Keyboards
• 2 x 1/4" Inputs with Thru Outputs
• -15 dB Pad for Active Instruments
• Handles Huge Transients without Chocking

• Fits 19 to 34mm Diameter Mics
• Fits MKH Microphones
• Includes Lyre Mount

• 20dB of Wind Noise Attenuation

• Eliminates Hum & Buzz from Ground Loops
• Zero Phase & Harmonic Distortion
• Jensen Transformer Equipped

• Great windshielding, in a smaller package
• Perfect for hand-held operations and interviews
• Optional Windjammer available for windiest conditions

• Stereo Version of J48
• Low Distortion
• -15 dB Pad
• High-Pass Filter at 80 Hz
• Retains Instrument's Tone
• 14-Gauge Steel Construction

• Measures 150mm Long
• Standard Hole Diameter 18 to 20mm

• Compatible w/DSLRs & Compact Cameras
• Cuts Wind Noise on Built-in Microphones
• Also Fits Mobile Phones, iPads
• Set of 6

• For Lavalier Microphones & Lav Mic Foams
• Thick Fur Blocks Wind Outdoors
• Maximum Wind-Noise Attenuation: 12 dB
• News, Documentary, Interview Applications
• Reduces Rustling Noises from Clothes

• Connect a Computer to a PA or Mixer
• Built-In 24-Bit / 96 kHz Convertor
• 2 x Balanced XLR 3-Pin Outputs
• 3.5mm Stereo Headphone Output
• USB Type-B Input
• Operates on USB Bus Power

• For Multimedia Applications
• Mono 1/4", Stereo RCA, and 3.5mm Inputs
• Mono XLR Line-Level Input
• Mic-Level Mono Sum at XLR Out
• -15 dB Pad

• For Stage & Home Recording Studio Use
• Handles High-Output Instruments
• Transformer Isolated, No Ground Loops

• Foam windscreen is designed to avoid high-frequency roll-off
• Up to 20dB of wind noise attenuation
• UV and moisture resistant

• Increased Dynamic Range and Headroom
• 48V Phantom Powered & Switching Supply
• -15 dB Pad Switch

19 to 25mm Mounting Clips Hytrel Construction Integrated 3/8" Threaded Stand Adapter

• Suitable for Lavalier Microphones
• Double-Sided Adhesive Pads
• Mounts Directly on Skin or Clothing
• Affixes Microphone Securely
• Hypoallergenic Fabric Material

• Active Signal Patch
• Eliminates Hum and Buzz common to PCs
• 1/4" / RCA / 3.5mm Inputs for Any Source
• -15 dB Pad, Ground Lift Switch
• 48V Phantom Powered

• Equipped with Jensen Transformers
• -15 dB Pad Per Channel
• Flat Frequency Response
• Transformer-Isolated I/O
• 14-Gauge Steel Construction

• Amp & Cab Simulator in Pedal Form
• Combo, Stack & 4x12 Cab Settings
• Presence Switch to Add Highs
• 180° Polarity Reverse Switch
• Ground Lift Switch

• 6 Overcover Fur Covers
• 30 Adhesive Stickies
• Reduces Lavalier Wind Noise
• Affixes to Skin or Clothing
• Black, Gray, and White

• Passive re-amping device
• Allows for playing prerecorded tracks through amplifiers and pedals and re-record the results
• Level control for fine tuning the gain
• Ground lift switch, when activated helps to reduce hum and buzz caused by ground loops