Radial Engineering JDX Direct Drive Amp Simulator and DI Box

Product #96299 | SKU RA-JDX-DIR-DRIVE | Radial
Usually ships in 4 - 6 weeks what does this mean?
Our Price $469.00 AUD
Usually ships in 4 - 6 weeks what does this mean?
- +

Email me when stock arrives

Shipping & Availability
Usually ships in 4 - 6 weeks. Deliver to New South Wales for $5.90 Change location
Click & Collect Availability
Sydney Out of stock. Pickup in 4 - 6 weeks
Click & Collect

Features

  • Amp & Cab Simulator in Pedal Form
  • Combo, Stack & 4x12 Cab Settings
  • Presence Switch to Add Highs
  • 180° Polarity Reverse Switch
  • Ground Lift Switch

Description

The Radial Engineering JDX Direct Drive Amp Simulator and DI Box is an amp simulator for your pedalboard, giving you the tone and feel of not just one, but three different amp/cab configurations. With this pedal, you can very well avoid lugging an amplifier around town from gig to gig altogether, though the pedal does provide a passive thru-put to feed unprocessed signal to your onstage amplifier, should you choose to go that route anyway. A dedicated, buffered tuner output supplies any electronic tuner with guitar tone without extra loading on your pickup, or without introducing noise from quartz clocks.

The pedal itself uses carefully tailored filters to create faithful emulations of caps, combos, and amp/cab configurations. You have choices here. You can select the COMBO setting, which models an early Fender Twin, or STACK mode, which mimics the timbre of a Marshall tube head feeding a 4x12 cabinet. JDX 4x12 Mode gives you the cabinet only, its tone specifically modelled to give you the sound of a cabinet mic’d by a Shure SM57 dynamic microphone. Both COMBO and STACK modes can receive even more tonal juicing from a special, two-position toggle switch, which lets you boost the highs for extra sparkle.

For outputs, the pedal provides a standard, phone type 1/4” jack and a balanced XLR DI for feeding processed signal to the house, a mixer, or a recording interface. A 180° polarity-reverse switch allows you to phase-align the signal with your onstage amplifier, if it happened to be out of phase, while a ground switch eliminates hums and buzzing often associated with ground loops. The pedal runs off of 9 VDC, either from a pedalboard brick, or from a separately available power supply.

Specifications

Controls POLARITY Toggleswitch
GROUND Toggleswitch
AMPLIFIER Toggleswitch
PRESENCE Toggleswitch
Connections 1 x 1/4" Instrument input, phone type
1 x 1/4" Instrument output, phone type
1 x 1/4" Thru output, phone type
1 x 1/4" Tuner output, phone type
1 x XLR Balanced DI output
Audio Circuit Type Class-A BiFET input buffer with electronic frequency shaping circuitry
Dynamic Range 83 to 100 dB
Gain Maximum gain, input to XLR output: 0 dB
minimum gain, input to 1/4" output: -5.8 dB
Noise Floor -78 dBu
Maximum Input > +5 dBu
Total Harmonic Distortion < 0.01%
Inter-Modulation Distortion > 0.1% at -15 dBu out
Output Impedance XLR output: 600 Ohms
1/4" output: 100 Ohms
Output Clip Level XLR output: > +5 dBu
Construction 14-gauge steel chassis and outer shell
Finish Powder coat
Power 40 mA, 9 VDC
Dimensions 120.7 x 92.1 x 50.8 mm
Weight 0.7 kg

In The Box

  • Radial Engineering JDX Direct Drive Amp Simulator and DI Box

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review

Details

  • Product: Radial Engineering JDX Direct Drive Amp Simulator and DI Box
  • Manufacturer: Radial
  • Model: JDX
  • SKU: RA-JDX-DIR-DRIVE
  • RM Product #: 96299
  • Warranty: 5 year manufacturer warranty

Recently Viewed

View All