Oben CT-2331 Carbon Fiber Tripod and BE-108 Ball Head Kit
Features
- Load Capacity: 8 lb
- Max Height: 58"
- Min Height: 8.7"
- Folded Length: 24.1"
- Leg Sections: 3
Description
The CT-2331 Carbon Fibre Tripod from Oben is a sturdy support for most compact DSLRs, point-and-shoot cameras, or a compact camcorder. With a load capacity of 8.8 lb and a maximum height of 54.8", the tripod offers a number of advanced features that ensure its stability and reliable performance.
The tripod features ergonomically designed rubber twist locks on each leg. Because legs are non-rotating, both of a leg's locks can be disengaged at once with a single twist of the wrist. This enables extremely fast setup of the CT-2331. A thoughtful leg design makes it a simpler task to service and maintain the leg sections.
With its 6x carbon fibre legs and centre column, the CT-2331 is both lightweight (weighs just 1.65 lb) and solid, ready to survive the rigours of professional work. The tripod chassis is aluminium alloy for further strength.
The CT-2331's rapid centre column extends with a twist of the butterfly knob. For protecting your camera when the column is retracted quickly, there's a rubber damper under the centre-post collar. Steel locking screws underneath the collar enable you to fasten a camera head more securely.
Pull-in/push-out positive leg locks allow you to set the positions of the three legs independently at three different angles. This allows you to shoot from low angles or on uneven terrain. For extreme low-angle shooting, the centre column can be split into two sections with the provided hex key. The shorter column leaves no protruding parts under the tripod collar, allowing you to extend the legs out to their maximum angle. For a faster method, the centre column is also easily reversible. These features are especially ideal for macro and close-up photography. The retractable metal counterweight hook serves as a stopper at the bottom of the centre column.
Features
Ergonomically designed rubber twist locks on each leg are non-rotating so both of a leg's locks can be disengaged at once with a single twist of the wrist enabling fast setup.
Reversible 1/4"-20 & 3/8"-16 screw fits almost any head
Bubble level on tripod chassis
Centre column is grooved to prevent rotation
Split centre column for low angle set-up
Spring-loaded metal counterweight hook at the bottom of the centre column
Integrated aluminium loop for attaching a shoulder strap
A removable rubber cap on each leg provides stability on flooring and stable ground and underneath, a metal spike offers stability on ice and soft terrain.
Included padded carry bag features dual heavy-duty zippers, an interior pocket, and extra room to accommodate a head
Specifications
General | |
Load Capacity | 8.8 lb / 4 kg |
Maximum Working Height | 54.8" / 139.2 cm |
Max Height without Centre Column | 45" / 114.3 cm |
Minimum Working Height | 5.5" / 14 cm |
Folded Length | 20.9" / 53.1 cm |
Head Mount Type | 1/4"-20 Screw, 3/8"-16 Screw |
Weight | 1.7 lb / 0.8 kg |
Materials | Carbon Fibre |
Bubble Level | Yes |
Legs | |
Leg Lock Type | Twist Lock |
Independent Leg Spread | Yes |
Leg Sections | 3 |
Leg Diameter | 0.8" / 20.3 mm |
Feet Features | Spiked |
Centre Column | |
Centre Column Features | Split |
Centre Column Sections | 2 |
Centre Column Extension Type | Rapid |
Lateral / 90-Degree Centre Column | No |
General | |
Head Type | Ball Head |
Base Mount | 3/8"-16 Thread |
Quick Release Plate Type | Arca-Type |
Load Capacity | 8.8 lb / 4.0 kg |
Number of Bubble Levels | 2 |
Friction Control | No |
Independent Pan Lock | Yes |
Physical | |
Ball Sphere Diameter | 0.9" / 24 mm |
Base Diameter | 1.5" / 3.8 cm |
Dimensions | H: 3.2" / H: 81.0 mm |
Weight | 10.6 oz / 300.0 g |
In The Box
- Oben CT-2331 Carbon Fibre Tripod
- Oben BE-108 Ball Head
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Oben CT-2331 Carbon Fiber Tripod and BE-108 Ball Head Kit
- Manufacturer: Oben
- Model: CT-2331/BE-108
- SKU: CT-2331/BE-108
- RM Product #: 70923