3 Legged Thing Punks Series Billy Carbon-Fiber Tripod with AirHed Neo Ball Head has been discontinued, here are some related products you might like:
3 Legged Thing Punks Series Billy Carbon-Fiber Tripod with AirHed Neo Ball Head
Features
- Load Capacity: 18.1 kg
- Maximum Height: 165.1 cm
- Minimum Height: 19.8 cm
- Folded Length: 45 cm
- Leg Sections: 4
Description
With a blue and orange colour scheme, this Punks Series Billy Carbon Fibre Tripod with AirHed Neo Ball Head from 3 Legged Thing is a support system that features a tripod with a detachable leg and removable centre column, which can be combined to form a monopod with a 82.5 to 171.5 cm adjustable height. Cameras, lenses, or sport optics that are compatible with a 1/4"-20 mount can be connected to the included QR4 Quick Release Plate, which is secured to the AirHed Neo Ball Head using a quick release clamp. The ball head is removable, provides up to a 90° tilt for portrait orientation, 360° of independent rotation, and can be locked into place along its range of movement.
When configured as a tripod, it supports up to 18.1 kg and measures 45 cm when folded. Each of its 4-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. As a tripod, it can be set at a minimum height of 45 cm, or 19.8 cm without its removable, push-and-pull, rapid centre column. Together, the three legs can be extended to obtain a maximum height of 140 cm, or 165 cm when used with the centre column fully raised. To further enhance stability on a wide variety of surfaces, each of the carbon fibre legs includes a rubber foot.
For added versatility, the centre column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. A nylon tripod carry bag with a drawstring closure, as well as a microfiber ball head carry bag are included for storage and transport.
Features
Use and Handling
- Support system with removable ball head that features a tripod with a detachable leg and removable centre column, which can be combined to form a monopod with a 82.5 to 171.5 cm adjustable height
- As a tripod, supports up to 18.7 kg
- Push-and-pull, rapid centre column with ballast loop for rapid camera, lens, or sport optic positioning
- Can be set for a minimum height of 45 cm, or 19.8 cm without the centre column
- All three legs can be extended in the tripod configuration to obtain a maximum height of 140 cm, or 165 cm when used with the centre column fully raised
- Centre column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them
- Legs each feature 4 sections, twist locks for fast deployment, and can be independently spread
- Legs can be locked at 23°, 55°, or 80° angles
- Rubber feet help to enhance stability on a wide variety of surfaces
- Weighs 1.36 kg and measures 45 cm when all three legs are reversed 180° and folded
- Ball head provides up to a 90° tilt for portrait orientation, 360° of independent rotation, and can be locked into place along its range of movement
- Arca-type clamp on ball head to secure quick release plate
- Included Toolz Multi-Tool with 4mm hex key, flat head screwdriver tip, as well as integrated carabiner and bottle opener, plus key chain
- Hex key adjusts tension on leg hinges
- Fasten or remove quick release plate from a device's accessory thread with hex key or flat head screwdriver tip
Construction Details
- Carbon fibre legs with built-in bubble level
- Removable, aluminium-alloy ball head with quick release clamp and dual, built-in bubble levels
- Quick release plate with 1/4"-20 mount and rubberised, anti-slip surface
- Centre column platform for ball head with three accessory eyelets as well as reversible, 3/8"-16 and 1/4"-20 mount
- Included nylon drawstring carry bag for storage and transport of the tripod
- Microfiber bag for storage and transport of the ball head
Specifications
Tripod Head | |
Head Type | Ball Head |
Base Mount | 3/8"-16 Thread & 1/4"-20 with Bushing |
Camera Mounting Thread | 1/4"-20 Male |
Quick Release Plate Type | Not Specified by Manufacturer |
Number of Bubble Level(s) | 2 |
General | |
Load Capacity | 18.1 kg |
Maximum Working Height | 165.1 cm |
Minimum Working Height | 19.8 cm |
Folded Length | 45 cm |
Materials | Aluminium Alloy, Carbon Fibre |
Weight | 1.4 kg |
Legs | |
Leg Lock Type | Twist Lock |
Leg Positions | 3 Positions |
Independent Leg Spread | Yes |
Leg Sections | 4 |
Leg Diameter | 2.3 cm |
Bubble Level | Yes |
Centre Column | |
Centre Column Features | Ballast Hook |
Centre Column Sections | 2 |
Centre Column Extension Type | Rapid |
Lateral / 90-Degree Centre Column | No |
In The Box
- Punks Series Billy Carbon Fiber Tripod with AirHed Neo Ball Head (Blue and Orange)
- AirHed Neo Ball Head
- QR4-AEQ Quick Release Plate
- Toolz Multi-Tool
- Ballast Loop
- Tripod Bag
- Ball Head Bag
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: 3 Legged Thing Punks Series Billy Carbon-Fiber Tripod with AirHed Neo Ball Head
- Manufacturer: 3 Legged Thing
- Model: BILLY
- SKU: BILLY
- RM Product #: 48345
- Material: Carbon Fibre
- Material: Aluminium Alloy