The Chief ConnexSys LVSXU Video Wall Landscape Mounting System supports 42 to 80" displays up to 150 lb on a single strut channel for quick row-levelling. It can extend your display from 4 to 13.4" from the wall and supports 200 x 100 to 700 x 400 mm mount patterns in either landscape orientation. It provides -2.5 to 4° of tilt adjustment, 1" of height adjustment, and three levels of lateral adjustment. The ConnexSys LVSXU mount instals on a separately sold rail and provides six points of adjustment in one location at the top.
Features
Speed
- Hang units on a single strut channel for quick row-levelling
- Eliminates the need for horizontal spacers
- Vertical measurement is simply the height of the display to the next rail
- Compatible with most 1-5/8" sizes of channel strut
- Reduces installation time - especially for XL and recessed configurations
- Tool-free ClickConnect latching secures displays
- PowerZone provides 6 points of adjustment in one location at the top of the mount
Alignment
- Height adjustment of ±1" on each interface
- Tilt adjustment at a single pivot point protects displays from twisting
- Depth can be set between 4 and 7.4" from the wall, providing a range of "home positions", making it suitable for recessed installations
- Both sides adjust independently, compensating for imperfections in the wall
- Walls can be out of alignment by up to 2" horizontally
- Three levels of lateral adjustment: Mount left/right along rail, interface left/right along mount, and lock in lateral guide for fine-tune adjustment using turn knobs, protecting screens from potential collisions
Serviceability
- RapidDraw display release system – cord release system gently and remotely pops any screen out for easy access and can be extended up to 13.4" for service
- Protects displays by not requiring an aggressive push to release/pop-out
- Releases only on demand, preventing accidental pop-outs
- Cord can be set up to pull for release from any 90° angle
- Kickstand provides 20° of bottom tilt access
Rigidity
- Rigid frame keeps displays where you set them, even after extending for service
- Adjustable "home" depth position locks screens in place to maintain alignment despite accidental bumps/pushes
Additional Features
- Accepts padlocks with up to 0.25" shank diameter
- Each mount comes with adjustments set in the same position
Specifications
| Supported Screen Sizes | 42 to 80" (106.7 to 203.2 cm) |
| Weight Capacity | 150 lb (68 kg) |
| Mounting Pattern | 200 x 100 to 700 x 400 mm |
| Tilt | -2.5 to 4° |
| Manual Height Adjustment | ±1" |
| Maximum Extension | 13.4" (34 cm) |
| Minimum Depth | 4" (10.2 cm) |
| Orientation | Landscape |
| Mounting Compatibility | 1-5/8" sizes of channel strut |
| Certifications | UL Listed, TÜV Certified |
| Dimensions (W x H x D) | 35.5 x 21.8 x 4" (90.3 x 55.4 x 10.2 cm) |
| Weight | Not specified by manufacturer |
