DPA Microphones 4017C-R Compact Shotgun Microphone with MMP-C Preamp and Rycote Windshield Kit has been discontinued, here are some related products you might like:
DPA Microphones 4017C-R Compact Shotgun Microphone with MMP-C Preamp and Rycote Windshield Kit
Overview
Description
The 4017C-R Compact Shotgun Microphone with MMP-C Preamp and Rycote Windshield Kit from DPA Microphones is for capturing audio. It is used in various audio for video applications such as wedding videography, film, broadcast TV, and more. This kit provides everything a boomer, outside broadcaster, journalist or location film maker could need for clear, directional sound capture. Featuring a DPA 4017C shotgun microphone pre-mounted in a Rycote suspension, with windshield, fur windjammer, XLR holder, brush, DPA XLR cable, and foam windscreen, this kit can provide maximum isolation in windy and wet weather conditions.
The 4017C-R features a supercardioid lobe-shaped directional pattern and is a pre-polarized condenser microphone. It has a frequency response of 20 Hz to 20 kHz and is powered by 48V phantom power. It is featured with the compact MMP-C pre-amp so booming applications such as in a car or in low ceiling rooms is uncomplicated. The total length of the microphone is 6.1" and it weighs only 2.5oz making it great for camera videographers. The 4017C microphone is built with an XLRM output connector. Windshield, suspension, fur windjammer, XLR holder, brush, XLR cable, and foam windscreen are included.
Key Features
- Flexible and complete windshield and suspension package provides varying levels of wind noise attenuation
- The suspension provides complete isolation against handling noise and cable-borne noises
- Great for use in the field where off-axis damping is required
- The MMP-C amplifier purposely uses a non-transformer approach to preserve sound quality while providing common mode rejection at or above 50 dB
- Excellent RF immunity
- Microphone super-cardioid polar pattern is highly directional
Specifications
Directional Pattern |
Supercardioid, lobe-shaped |
Principle of Operation |
Pressure gradient, with interference tube |
Cartridge Type |
Pre-polarized condenser |
Frequency Range |
20 Hz to 20 kHz ± 2 db at 60 cm: 40 Hz to 18 kHz with typ. 3 dB soft boost at 15 kHz |
Sensitivity |
Nominal, ± 2 dB at1 kHz: 19 mV/Pa; -34 dB re. 1 V/Pa |
Equivalent Noise Level |
A-weighted: Typ. 13 dB (A) re. 20 µPa (max. 15 dB(A)) ITU-R BS.468-4: Typ. 24 dB (max 26 dB) |
Signal to Noise Ratio |
A-weighted, re. 1 kHz at 1 Pa (94 dB SPL): Typ. 81 dB (A) |
Total Harmonic Distortion |
< 1 % up to 137 dB SPL peak |
Dynamic Range |
Typ. 124 dB |
Max SPL Level |
Peak before clipping: 146 dB |
Output Impedance |
100 Ω |
Minimum Load Impedance |
2 kΩ |
Cable Drive Capability |
328' (100 m) |
Common Mode Rejection Ratio |
> 50 dB |
Power Supply |
48 V Phantom power (± 4 V) |
Output Balance Principle |
Impedance balancing with active drive |
Current Consumption |
2.8 mA |
Connector |
XLR-3M pin 1 shield, pin 2 signal + phase, pin 3 phase |
Temperature |
-40 to 113 °F (-40 to 45 °C) |
Relative Humidity |
Up to 90% |
Output Voltage |
RMS: 4.5 V |
Polarity |
+V at pin 2 for positive sound pressure |
Dimensions (LxDiameter) |
6.1 x 0.75" (154 x 19 mm) |
Weight |
2.5 oz (70 g) |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: DPA Microphones 4017C-R Compact Shotgun Microphone with MMP-C Preamp and Rycote Windshield Kit
- Manufacturer: DPA Microphones
- Model: 4017C-R
- SKU: 4017C-R
- RM Product #: 20640