Dangerous Music Monitor SR

Product #47985 | SKU MONITOR SR | Dangerous Music
Contact us for an ETA what does this mean?
Contact us for an ETA what does this mean?
This product can't be purchased at this time, please contact us for more information.
- +

Email me when stock arrives


Switch Between Three Sets of Speakers, Stereo Aux Input Path


The Dangerous Music Monitor SR is a 1U rack mountable device designed by mastering engineers to expand the monitoring functionality of the Dangerous Music Monitor ST. The unit enables 5.1 surround sound monitoring. Additional Monitor SR units can be connected and configured for surround sound formats such as 7.1, 10.2, or greater. For I/O, the unit has 25-pin D-Sub connectors for Input 1, Input 2, Input 3, Input4, output Speaker 1, output Speaker 2, output Speaker 3/Sub, and metre feed. The SR unit connects to the Monitor ST via two included ribbon cables. Both devices can be controlled using the Monitor ST remote control over Cat-5 cable. The device is hand built in the USA with mastering grade components to exacting standards.


Analogue Stepped-Attenuator Volume Control

Provides accurate and repeatable volume adjustments without the loss of imaging found in digitally controlled amplifier and voltage controlled amplifier circuit designs

4 Input Sources

Allows you to switch between your DAW outputs, DVD player, CD player, tape machines, or other sources

3 Speaker Outputs

Switch between up to 3 sets of monitors

Programmable Gain Offsets

Adjust and store level offsets for different sources

Input Level Compensation

Instantly adjust for -10dBV and +4dBu sources when working with consumer devices

Continuously Variable Level Offset for Input 4

Compensates for commercial CD levels so you can perform true A/B comparisons

Programmable Input Gain Offsets

Fine-tune and store level offsets to achieve apparent equal loudness on all control room speakers with trims for left and right rear, centre, and LFE

Selectable Subwoofer Filtering

Selects and stores different subwoofer filtering options for each set of speakers

Comprehensive Speaker Mute, Dim, and Solo

Mutes, dims and solos speakers in any combination

Onboard Cue Amp

Provides 20W of headphone monitoring

Flexible Stereo Cue System

Offers main and auxiliary inputs for cueing your mix

Selectable Source Output

Sends source signals to external devices such as a level metre

Talkback System with Dual Control and Dedicated Slate Output

Gives the producer his or her own talkback button and lets you send the slate output to a powered speaker for open-air talkback

DC Coupled

Built without transformers that would colour or filter caps that would smear the stereo image of your sound

Ground and Hum

Includes a ground jumper with adjustable position for removing the buzz sometimes caused by grounding issues


Connections Input 1: 1 x 25-pin D-Sub connector
Input 2: 1 x 25-pin D-Sub connector
Input 3: 1 x 25-pin D-Sub connector
Input 4: 1 x 25-pin D-Sub connector
Speaker 1: 1 x 25-pin D-Sub connector
Speaker 2: 1 x 25-pin D-Sub connector
Speaker 3/Sub: 1 x 25-pin D-Sub connector
Metre Feed: 1 x 25-pin D-Sub connector
To Monitor ST: 1 x 25-pin D-Sub connector
From Monitor ST: 1 x 25-pin D-Sub connector
Remote In: 1 x RJ45 port
Remote Through: 1 x RJ45 port
Accuracy Gain Tracking: better than 0.05dB for 6 channels
THD + N 0.002%
IMD 0.003%
Frequency Response 1 to 100,000 Hz at -0.1 dB
Crosstalk Rejection Typically @ 1 kHz >96 dB
Nominal Input Level +4dBu or -10dBV
Crossover -3dB at 57 Hz
18 dB/octave modified Butterworth/Chebyshev curve
Headphone Amp 0.002% THD+N
Headroom +25 dBu to main outputs
Dimensions (H x W x D) 1.75 x 19.00 x 9.50" (4.45 x 48.30 x 24.10 cm)
Weight 10.5 lb (4.76 kg)


0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review


  • Product: Dangerous Music Monitor SR
  • Manufacturer: Dangerous Music
  • Model: MONITOR SR
  • RM Product #: 47985

Recently Viewed

View All