Elinchrom ELB 1200 Pro To Go Kit

Description

Designed for work on the road, the Elinchrom ELB 1200 Pro To Go Kit is a comprehensive setup that allows you to use professional-quality light on location, far from an electrical outlet. The kit includes the ELB 1200 Pack with battery charger and sync cord. A Pro Flash Head with LED modeling lamp is included with a reflector and a 4 m head cable, while an EL-Skyport Transmitter Plus is provided to trigger the pack wirelessly at distances up to 656'. It all fits in the included ProTech Location Bag with Snappy carrying option with shoulder strap.

With its sleek, modernised casing and reduced form factor, Elinchrom introduces the powerful, portable ELB 1200 Power Pack with Battery . The power pack, lithium-ion battery, charger, and sync cord are included. The pack's good looks and convenience features are backed by high performance. Speed is the operative word. The pack can deliver its 1200Ws symmetrically or asymmetrically in 1/10 or 1 stop increments with 8.5 stops of power variability from 7 to 1200Ws. There are three flash modes: Eco, Default and Fast, and the pack recycles to full power in 1.7 seconds in Fast Mode. Flash duration is an action-stopping 1/8850 second at 33% power with the optional Action Flash Head.

Elinchrom has redesigned the separately purchased Action, Hi-Sync, and Pro flash heads with use with the ELB 1200 in mind. The Hi-Sync head is optimised for HS shooting up to 1/8000 second, while the Pro head will give you 1/5050 second flash duration at 140Ws. True to its name, the Action head will give you the fastest flash duration of 1/8850, when set to 172Ws. Each fan-cooled head is outfitted with a bright LED modelling light that draws minimal power from the pack. The ELB 1200 has settings on its OLED display for On, Free (selectable level), Timer (1-60 sec), Proportional (to power level), and Dimming (from 5 to 100%).

Triggering options include a 3.5mm sync port, but the EL 1200 has a built-in EL Skyport receiver that will allow you to wirelessly fire the unit at distances up to 656' with the addition of an EL Skyport transmitter.

The EL 1200 runs on your choice of two separately purchased lithium-ion batteries. The standard Air battery will give you 215 full-power flashes and 80 minutes of run time for the LED modelling light. The more powerful HD battery provides 400 full-power flashes and 120 minutes of run time. One of these batteries and a charger are required for use of the ELB 1200.

The Lithium-Ion Battery Air for ELB 1200 Pack from Elinchrom is a power source for the ELB 1200Ws battery powered pack. It will provide 215 full-power flashes and an 80-minutes LED run time for the optional flash head's modelling light.

The Charger for ELB 1200 Lithium-Ion Battery from Elinchrom recharges the Air or HD batteries that provide power for the ELB 1200 Battery Pack. Charging time is 1.5 hours for the Air battery and 2.5 hours for the HD battery. A full charge gives the Air battery 215 full-power flashes and 80 minutes of LED run time. It gives the HD battery 400 full-power flashes and 120 minutes of LED run time.

This is an Elinchrom 3.5 mm Jack to EL-Amphenol Sync Cord. It is 5 m long, and it is used to hardwire Elinchrom flash packs or monolights in cases where the units are too far-spread for the optical slaves to function. It may also be used in cases where your radio slave is ineffective, or not allowed.

Features

• 18 x 13 x 28 cm (with battery)
• 3.2 kg (without battery)
• Large OLED control display
• Fast recycling times (1.7 seconds in Fast Mode, 3 seconds in Default Mode)
• Strobo, sequence, and delayed flash mode
• USB for firmware updates
• Centralised umbrella socket for optimised and even light distribution.