- Uses Four HDTVs to Create 2x2 Video Wall
- HDMI Input/Outputs with HDCP Support
- 1080p and WUXGA Input and Output
- Advanced Bezel Compensation
- On Screen GUI to Change Settings
Email me when stock arrives
- Product: #35704
- SKU: EXT-HD-VWC-144
The HD Video Wall Controller from Gefen takes a single HDMI source at up to 1080p resolution and splits it into four quadrants, thus providing a simple way for you to create a 2 x 2 video wall without investing in special video wall-capable displays. There are four HDMI outputs, with each output assigned to one of the four displays in the group. Because the resolution of the incoming signal is effectively quartered, the HD Video Wall Controller can also scale each of the outputs back up to 1080p so that the displays will receive a signal in their native resolution. HDCP is supported, meaning you can even pass copy-protected sources such as Blu-ray DVDs. Video walls are suitable for a host of applications that require an outsized display where using a projector isn't an option, including entertainment, digital signage, retail outlets, clubs, trade shows, control centres, building lobbies, and more.
Both local and remote control is possible with the HD Video Wall Controller. Front panel buttons and an on screen display allow settings to be changed locally at the device. Where line-of-sight communication is possible, there is an IR remote included. An IR extender port means you can even extend the IR signal over wire for non-line-of-sight scenarios by employing an IR extender kit sold separately. For remote and offsite management there is RS-232 and an Ethernet port. The device features a built-in Web server with Telnet and UDP support for control across and IP network or even the Internet.
- Create a 2x2 video wall from any HDMI source, using four HDTV displays
- Supports input and Output resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA)
- Advanced Bezel Compensation feature provides compatibility with virtually any screen frame width, and allows for accurate display of the image
- Field-upgradeable firmware via web server interface
- USB port (reserved for future product enhancements)
- Locking HDMI and power supply connectors
- 1RU rackmountable form factor with rack ears included
|Input||1 x HDMI (locking)|
|Output||4 x HDMI (locking)|
|Control||1 x RS-232 on DB-9 female
1 x Ethernet on RF-45 (Web server, Telnet, UDP)
1 x IR extender port
Front panel buttons for local control
|USB||1 x USB mini type B (for future product enhancements)|
|LED Indicator||1 x Red LED|
|Power Requirements||12 VDC (locking connector)|
|Power Consumption||Maximum: 24 W|
|Dimensions||16.9 x 1.7 x 7.9" / 430 x 42 x 200 mm|
Australian Shipping Via DHL
DHL now offer a great express shipping service to Australia from New Zealand. We are proud to be able to offer overnight shipping to main cities on the east coast of Australia. These main centers include:
Whilst this service is extremely efficient and will be delivered overnight 99.9% of the time, it cannot be guaranteed. In the case where something were to go wrong with your delivery and it did not arrive overnight, it will most likely be delivered by the next day.
While not all major cities are eligible for overnight delivery, they still benefit from this great service. Other centers throughout Australia will have a typical delivery ETA of 2-4 days. (Excluding rural delivery address where this ETA can be extended to an additional three or more days).
If you require urgent shipping and you don’t reside in one of the cities stated above, please contact us and we can find a solution that works best for you.
Please Note: Shipping via DHL is not available to PO boxes and/ or parcelboxes etc.