IDX CW-5HD WEVI™ HD Video Transmission System

Description

CW-5HD Wireless HD-Video Transmission System

Highlights

Multiple video formats and profiles including 1080i/23.98PsF
Automatically detects between HD-SDI and SD-SDI signals
Two channels of embedded audio ensures no signal interference
Transmission range of 150 feet line of sight or up to 100 feet through walls (actual range may vary depending on site conditions)
No special FCC license is required for operation
2-channel embedded audio ensures no signal interference for complete audio/video syncronization.
Uses integrated V-Mount for camera and battery connection; fully compatible with ENDURA batteries.
Selection of 4 manual channel frequencies--ideal if operating multiple systems in close proximity.
Stylish and rugged design, with no visible external antenna
12W power consumption and weighs under 2 lbs.
TX features loop-through; RX outputs dual simultaneous signals
Conformance to major technical and environmental standards including FCC, CE and ROHS specifications

Transmitter and Receiver Specifications

Frequency : 5.18GHz – 5.86GHz
Tuning Range / Frequency selection : Four selectable channels or one auto select (TX only)
Transmit Power : 89mW maximum (TX only)
Transmitter/Receiver Antenna : Internal 2dBi gain
Transmit Method : MIMO
Modulation : Orthogonal Frequency Diversity Multiplexing (OFDM)
Latency : Less than 1ms
Video Input : HD-SDI (SMPTE 292M) and SD-SDI (SMPTE 259M-C)
Video Formats : HD-1080i/59.94, 1080i/50, 1080i/23.98PsF, 1080p/29.97, 720p/59.94, 720p/50 SD-525i/59.94, 625i/50
Audio Output (TX)/Audio Input (RX) : Two channels SDI embedded channel 1 and 2
Power Requirement : 11-17V DC via battery plate or 4-pin XLR connector
Power Consumption : 12W approx.
Dimension : 6.22(W)x2.83(D)x7.40(H) inches
Weight : Approx. 1.76 lbs. approx.

Optional configurations are available for three-mount stud and 1-cm spacer installation on any or all sides of the transmitter and receiver modules.