Features
- Compact 4-channels headphone amplifier with 8 outputs
- Powerful to drive high impedance headphone such as studio reference headphone
- Independent level control and “Shape Out” switch for each channel
- LED output meter for each channel for monitoring
- Master level control with LED metering and L/R pan adjustment
- 2 Channel and Stereo selection switch
- Rugged aluminum construction and adopted ICON’s Reo series racking system
Specifications
| Master section (Front panel) | |
| Master volume control | Min-Max |
| Master level meters | 6-segment LED (-24 to OL) |
| Controls | ST/2CH switch, volume control, balance control |
| Master section (Rear panel) | |
| Input | 2 TRS balanced 1/4” (Left-Right) or (Left mono) |
| Impedance | 15k ohm balanced |
| Maximum input level | +26dBu balanced |
| CMRR | Min. 40dB, >55dB @1kHz |
| Link output | |
| Connectors | 2x1/4” TRS Balanced (Left-Right) parallel to main input |
| Maximum output level | Matches main input |
| Channels | |
| Impedance | 10k ohm Unbalanced |
| Maximum input level | +21dBu Unbalanced |
| Level meters | 6-segment LED (-24 to OL) (load compensating) |
| Output | 2x1/4” TRS (Left-Right) headphone output per channel |
| Maximum output level | 240mW @32 ohm, 640mW @66 ohm |
| Impedance minimum | 8 ohms |
| Controls | EQ Shape switch, volume control |
| System | |
| Frequency response | 10Hz to 32kHz, (+/-3dB) |
| Signal to noise | >90dB, un-weighted, 22Hz to 22kHz |
| THD | 0.008% typical @+4dBu, 1kHz |
| General | |
| Power supply | ICON AC18v/700mA power adapter |
| Power consumption | 29W max. |
| Weight | 3.3kg (7.3lbs) |
| Dimensions (WxDxH) | 224 x 170 x48 mm |
