Purpose-designed for CURV 500® installations the iAMP® is a low-profile 4-channel Class D rackmount amplifier with high-efficiency switch mode power supply and 10 Hz – 22 kHz frequency response. Sporting DSP control with presets for various satellite and subwoofer configurations, delay and parametric EQ each channel delivers 240 watts RMS at 4 ohms with less than 0.01% THD.
Operating the iAMP® is simple and intuitive with just a single push encoder and easily readable high-contrast OLED display. It features a soft start circuit, DC, overcurrent, thermal and short circuit protection plus a temperature controlled low- noise fan. Input is on balanced XLR and terminal block connectors. The iAMP® is capable of driving up to six CURV 500® satellites or one CURV500ISUB subwoofer per channel providing terminal block and speakON-compatible output connectors.
Specifications
| Product number | LDCURV500IAMP |
| Product type | Power Amplifiers |
| Type | Installation Power Amplifiers |
| Rated ouput power (1kHz @ 2,7 Ohms) | 4 x 240W |
| Rated ouput power (1kHz @ 4 Ohms) | 4 x 240W |
| Rated ouput power (1kHz @ 8 Ohms) | 4 x 120W |
| Rated ouput power (1kHz @ 16 Ohms) | 4 x 60 |
| Output circuitry | Class D |
| Frequency response | 10 - 22000Hz |
| THD | < 0,01 % |
| Protection circuits | DC, short circuit, over-current, soft start, thermal overload |
| Controls | Push encoder |
| Indicators | OLED Display |
| Line inputs | 4 |
| Line input connectors | terminal block, XLR |
| Loudspeaker outputs | 4 |
| Speaker output connections | Speakon compatible, terminal block |
| Cooling | temperature controlled low-noise fan, noiseless in idle mode |
| Operating voltage | Switching power supply, 115 V AC / 230 V AC (switchable) |
| Power consumption @ full load | 1100W |
| Width | 482mm |
| Height | 44mm |
| Depth | 420mm |
| Weight | 6.8kg |
