Mixars PRIMO 2-Channel Controller and Mixer with Standalone Effects for Serato DJ
This product is no longer available
Overview
6-Input / 12-Output USB Audio Interface, 24-Bit, 48 kHz, 16 Performance Pads for Cue, Roll, Slice, Large Aluminum Jog Wheels with Display
Description
The Mixars PRIMO 2-Channel Controller and Mixer with Standalone Effects for Serato DJ features dedicated effects on each channel including Filter, Noise, Crush, and Gate. With phono and line inputs available on every channel, the PRIMO allows DJs to incorporate other players such as media decks and turntables for a wide variety of performance options. Additionally, the Serato DJ Pro software is eligible for an upgrade to Serato DJ DVS, allowing turntable control over Serato DJ. Furthermore, the PRIMO includes an auxiliary input with a dedicated volume control, as well as a combo XLR-1/4" microphone input with independent tone controls and a dedicated microphone echo. The Mixars PRIMO can be UBS bus powered or powered by the included power adapter and ships with a USB cable.
Features
- 2 channel 4 deck controller, unlocks Serato DJ Pro
- Stand-alone mixer with filter effects
- paid upgrade to Serato DVS
- Built-in sound card for simple USB connectivity
- touch needle search
- 8 Performance pads on each deck to control Hot Cues, Roll, Slicer, and Sampler
- Large aluminum jog wheels with LED Ring
- Full control and assignment of Serato FX
- adjustable crossfader curve
- Mic with dedicated echo effect
- USB Powered
- Auxiliary RCA input with dedicated volume
- 100mm Pitch Control
Specifications
| Jog Control | Large Aluminium Jog Wheels with On-Jog Display and LED Ring |
| Pads | 16 RGB Pads |
| Level Metres | 3 VU-level Metre |
| Adjustments | Crossfader Curve Adjustment and Reverse |
| Touchstrip | Touch Needle Search Strip |
| Mic Input | Pro Combo Mic Input with Independent Volume, Tone Control, and Echo |
| RCA | Auxiliary RCA Input with Dedicated Volume |
| Headphone Out | 2 |
| Plug & Play | Yes |
| Audio Characteristics | Unbalanced Output Load: 100 kOhms Balance Output Load: 600 Ohms Phones: 33 Ohms (AEQ/Filter Flat, Mic Echo at Min, Fader at Maximum unless Otherwise Noted) |
| Input Impedances | Input Impedance / Reference Input Level (1 kHz Input, Mic/Aux, Trim, Master at Max) Line: 10 kOhms / -14 dBV (200 mV) Phono: 47 kOhms / -50 dBV (3.16 mV) Aux: 10 kOhms / -14 dBV (200 mV) Mic: 5 kOhms / -54 dBV (1.99 mV) (Unbalance) USB: 90 Ohms / -23.4 dBFS Non Serato Mode |
| Output Impedances | Output Impedance / Reference Output Level (1 kHz Input, Mic/Aux, Trim, Master at Max) Master: 1 kOhms / 0 dBV (1 V), ±1 dB (Nominal), ±2 dB (Limited) Balanced: 600 Ohms / 0 dBV (1 V), ±1 dB (Nominal), ±2 dB (Limited) Booth: 600 Ohms / 0 dBV (1 V), ±1 dB (Nominal), ±2 dB (Limited) Phones: 33 Ohms / 0 dBV (1 V), ±1 dB (Nominal), ±2 dB (Limited) |
| Frequency Response | (Reference Input Level, Mic/Aux, Trim at Maximum, Master at 12 O'Clock) Line: 20 Hz to 20 kHz, +1/-1.5 dB (Nominal), +2/-3 dB (Limited) Aux: 20 Hz to 20 kHz, +1/-1.5 dB (Nominal), +2/-3 dB (Limited) Phono: 20 Hz to 20 kHz, +1/-2 dB (Nominal), +2/-3 dB (Limited, RIAA) Mic: 20 Hz to 20 kHz, +1/-2 dB (Nominal), +2/-3 dB (Limited) |
| Maximum Input | (Mic/Aux, Trim, Master at 9 O'Clock. Adjust Input 1 kHz to Output Level <1% T.H.D. with A-W/20 kHz LPF) Nominal / Limited Line: +10 dBV / +8 dBV Phono: -25 dBV / -28 dBV Mic: -20 dBV / -23 dBV |
| Maximum Output | (Mic/Aux, Trim, Master at Max. Adjust Input 1 kHz to Output Level <1% T.H.D. with A-W/20 kHz LPF) Nominal / Limited Master Unbalanced: +11 dBV / +9 dBV Master Balanced: +11 dBV / +9 dBV Booth Balanced: +11 dBV / +9 dBV Phones: +5 dBV / +4 dBV |
| Signal-to-Noise Ratio (SNR) | (1 kHz Input, Mic/Aux, Trim, Master at 12 O'Clock, with A-Weight/20 kHz LPF, Input Short when No Signal) Nominal / Limited Line: 94 dB / 90 dB (at 0 dB Input) Phono: 90 dB / 86 dB (at -36 dB Input) Aux: 92 dB / 88 dB (at 0 dB Input) Mic (at -40 dB Input): 80 dB (Nominal), 76 dB (Limited) |
| THD+N | (1 kHz Input, Mic/Aux, Trim, Master at 12 O'Clock, with A-Weight/20 kHz LPF) Nominal / Limited Line: 0.005% / 0.01% (0 dB Input) Aux: 0.005% / 0.01% (0 dB Input) Phono: 0.02% / 0.05% (-36 dB Input) Mic: 0.02% / 0.05% (-40 dB Input) |
| Crosstalk | (1 kHz Input, Mic/Aux, Trim, Master at 12 O'Clock with A-w / 20 kHz LPF, Input Short when No Signal) Nominal / Limited Line: 94 dB / 90 dB (Each Channel Input at 0 dB Input) Phono: 88 dB / 84 dB (Each Channel Input at -36 dB Input) Aux: 88 dB / 84 dB (Each Channel Input at 0 dB Input) |
| Channel Separation | (1 kHz Input, Mic/Aux, Trim, Master at 12 O'Clock with A-w / 20 kHz LPF, Input Short when No Signal) Nominal / Limited Line: 93 dB / 89 dB (Between L and R Channel at 0 dB Input) Phono: 90 dB / 86 dB (Between L and R Channel at 0 dB Input) Aux: 86 dB / 82 dB (Between L and R Channel at 0 dB Input) |
| Equaliser | (Reference Input Level, Mic / Aux, Trim at Max Master at 12 O'Clock with 20 kHz LPF) Nominal / Limited Line: Low Band: (Low-Band Reference Frequency is 70 Hz) Maximum Level: +12 ±1 dB / ±1.5 dB Minimum Level: -25 ±1 dB / ±1.5 dB Middle Band: (Mid-Band Reference Frequency is 1 kHz) Maximum Level: +12 ±1 dB / ±1.5 dB Minimum Level: -25 ±1 dB / ±1.5 dB High Band: (High-Band Reference Frequency is 13 kHz) Maximum Level: +12 ±1 dB / ±1.5 dB Minimum Level: -25 ±1 dB / ±1.5 dB Mic Tone Nominal / Limited Max: -28 dB / -26 dB (at 100 Hz) Min: -28 dB / -26 dB (at 10 kHz) |
| Channel Fader Kill | (0 dB 1 kHz Input Level, Trim/Master at 12 O'Clock. Mic Switch Off with A-W / 20 kHz LPF) Nominal / Limited Channel Fader: -95 dB / -91 dB Cross Fader: -95 dB / -91 dB |
| Levels | Level Difference L&R: (1 kHz Reference Input Level, Trim, Master at Maximum with A-w / 20 kHz LPF) Line: 0 dB ±0.5 dB / ±1 dB Phono: 0 dB ±1 dB / ±1.5 dB Aux: 0 dB ±0.5 dB / ±1 dB |
| USB Interface | Channels: 6 In/ 12 Out Sampling Rate: 48 kHz Resolution: 24-Bit |
| Environmental Conditions | Ambient Temperature: 73°F / 23°C (±2°C) Relative Humidity: 65% ±5% |
| Power | Power Source: DC Adapter 100 to 240 VAC 50/60 Hz, USB Powered Power Supply: DC Adapter 5 VDC, 2 A USB Power: USB Port with Current Supply >1 A |
| Dimensions (W x D x H) | 20.0 x 13.0 x 2.6" / 508.4 x 330.7 x 65.6 mm |
| Weight | 9.3 lb / 4.2 kg |
In The Box
- Mixars PRIMO 2-Channel Controller and Mixer with Standalone Effects for Serato DJ
- USB Cable
- Power Adapter
Reviews
(no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Mixars PRIMO 2-Channel Controller and Mixer with Standalone Effects for Serato DJ
- Manufacturer: Mixars
- Model: PRIMO - MIXARS
- SKU: PRIMO - MIXARS
- RM Product #: 59407
Recently Viewed
View AllMixars PRIMO 2-Channel Controller and Mixer with Standalone Effects for Serato DJ
Loading...
