The SCM-1000 Studio Condenser Microphone from Nady is designed for project studio recording, podcasts, light broadcast applications, and similar scenarios. The large diaphragm condenser microphone features 3 user switchable polar patterns: omnidirectional, cardioid and figure-8. A -10 dB pad switch maximises headroom and minimises noise when capturing transient peaks. The low frequency roll-off switch further minimises low-frequency noise caused by hum, proximity effect, air conditioning systems, and other devices.
Features
- Large, pressure-gradient condenser, gold-sputtered diaphragm and FET preamplifier
- Internal shockmount construction for structural integrity and rugged reliability
- Selectable 10 dB attenuation pad and low-cut filter
- Multiple selectable polar patterns: omni, cardioid, figure-8
- Requires 48V of phantom power
Specifications
| Operating Principle | Pressure Gradient |
| Transducer | Condenser |
| Diaphragm | 1.1" (27.94 mm) |
| Polar Pattern | Cardioid, Figure 8, Omnidirectional |
| Frequency Range | 20 Hz to 20 kHz |
| Signal to Noise Ratio | 76 dB A-Weighted |
| Equivalent Noise Level | 26 dB |
| Maximum SPL | 134 dB SPL 1% |
| Impedance | 200 ohms |
| Load Impedance | 1 kOhms |
| Sensitivity | 40 dBV, re: 1 V/Pa |
| Power Requirements | 48 V |
| Pad | Yes, 10 dB |
| Output Connectors | 3-Pin XLR |
| Operating Relative Humidity | 90% |
| Operating Temperature | 14 to 140°F (-10.00 to 60.00°C) |
| Operating Current Consumption | 3.0mA |
| Length | 6.50" (165 mm) |
| Diameter | 2.17" (55 mm) |
| Weight | 15.17 oz (430 g) |
