Phonic Icon 700 700W Contractor Power Amplifier
This product is no longer available
Features
- Output power 2 x 550W at 2 ohms
- 2 x 350W into 70V or 100V
- Automatic dual-speed
- high-efficiency cooling fan
- Output via covered barrier strips
Description
Phonic Icon 700 700W Contractor Power Amplifier is designed with the needs of sound contractors in mind. Barrier strip outputs enable 25V, 70V and 100V Line operation. As well as the connection to standard low impedance speakers. Each amplifier channel has a separate toroidal secondary transformer that provides full electrical isolation and ensures maximum audio separation. Features like power up muting, full short-circuit, temperature, DC offset protection and a built-in 45 Hz subsonic filter, combine to make the Icon Series an attractive, cost effective solution for any audio installation.
Features
- Output power: 2 x 550W at 2 ohms, 2 x 350W into 70V or 100V
- XLR and barrier strip input connectors
- Output via covered barrier strips
- Automatic dual-speed, high-efficiency cooling fan
- Full short-circuit, temperature and DC offset protection
- Toroidal output transformers provide full electrical isolation and meet worldwide safety standards
Specifications
Direct Power Out | |
8 ohm | 240W×2 |
4 ohm | 400Wx2 |
2 ohm,1kHz,1%THD | 550W×2 |
Bridged mono 8 ohm,1kHz,1%THD | 850W |
Bridged mono 4 ohm,1kHz,1%THD | 1100W |
Isolated Constant Voltage Out | |
200V or 140V Bridge | 700W |
100V or 70V | 350W×2 |
25V | 280 |
Frequency Response | |
Direct Outputs (+0/-2dB) | 50Hz-50kHz |
Isolated Outputs (+0/-2dB) | 50Hz-16kHz |
Total Harmonic Distortion | <0.05 |
Sensitivity (for full output) | 1.02V |
Voltage Gain | 32dB |
Input Impedance | |
Balanced/Unbalanced | 20k/10k ohm |
Damping Factor | >200(direct output) |
S/N Ratio | Less than 100dB below rated output (20Hz-20kHz) |
Protection Circuits | Output offset voitage protection Heat sink overheat protection Transformer overheat protection Load shorting protection Power on/off protection |
Controls | |
Front Panel | Power Switch |
Rear Panel | Ch1 & Ch2 gain controls (41 click); Parallel/Stereo/Bridge switch |
Connectors | |
Input | XLR jack × 2,Barrier strip ×1 |
Output | Covered Barrier strip ×2;heavy-duty binding post |
Cooling | One dual speed fan |
Dimensions(H×W×D) | 132×480×428mm |
Net Weight | 24.3 Kg |
In The Box
- Phonic Icon 700 700W Contractor Power Amplifier
Reviews
(no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Phonic Icon 700 700W Contractor Power Amplifier
- Manufacturer: Phonic
- Model: ICON 700
- SKU: ICON 700
- RM Product #: 59513