Phonic XP 5000 5000W Stereo Power Amplifier
Overview
Description
The Phonic XP 5000 5000W Stereo Power Amplifier delivers from 1120 to 5000 Watts of power in two to three rack spaces. Built around robust and advanced toroidal transformers, they deliver clean power on demand. The advanced protection circuitry guards against short circuit and open circuit, and also protects against ultrasonic and RF interference. A high current power supply increases reliability and performance. Other features include center-detented gain controls, input peak limiter, selectable high pass filter, and fast recovery to ensure low distortion. The variable speed fans effectively cool the amp and protect against overheating. Input is through XLR or 1/4" connectors, while you can use Speakon-type or binding post connectors for output. Phonic XP Power Amplifiers are specially designed for professionals who value high power, audio clarity, reliability and lasting performance.
Features
- Output Power: 2500W @ 2 ohms per channel, 1800W @ 4 ohms per channel
- High-current toroidal transformers for greater two-ohm power and low noise
- Independent user-defeatable clip limiters reduce distortion
- XLR, 1/4” and barrier strip inputs all included
- Front mounted detented gain controls for easy access
- Bridge mono and parallel mode LEDs
- Fast Recovery design for lower distortion if clipping occurs
- Very rugged housing
- Active balanced inputs for low noise
- Signal level at -40, -20, -10, protect and clip LED indicators to monitor performance
- Ground Lift switch to prevent humming
- Selectable stereo, parallel & bridge mono amp modes
- Two ventilation variable speed fans
- Speakon-type connectors and 5-way binding posts speaker outputs
- XLR & 1/4" TRS connectors for maximum input flexibility
- Requires two standard rack units for mounting
- Fits a standard 19" rack
Specifications
Stereo Mode (driving both channels) | Continuous Average Output Power Per Channel |
8Ω 20Hz-20KHz 0.03% THD | 1050W |
4Ω 20Hz-20KHz 0.05% THD | 1600W |
8Ω EIA 1KHz 1% THD | 1100W |
4Ω EIA 1KHz 1% THD | 1800W |
2Ω EIA 1KHz 1% THD | 2500W |
Bridge Mono Mode | Continuous Average Output Power |
8Ω 20Hz-20KHz 0.1% THD | 3200W |
4Ω 1KHz 1% THD | 5000W |
System Specifications | |
Input Sensitivity | 1.23 Vrms |
Noise (unweighted 20Hz-20KHz below rated output) | 107 dB |
Distortion (SMPTE-IM) | <0.02% |
Damping Factor | >250 @ 8Ω |
Output Circuitry | Class H Amplifier |
Filtering | High pass filter (30Hz, 50Hz) |
Frequency Response | 20Hz-20KHz, 0/-1dB, -3dB points: 5Hz-100KHz |
Input Impedance | 20 kΩ balanced, 10 kΩ unbalanced |
Cooling | Dual continous variable-speed fans, front-to-rear air flow (one fan on XP5000/XP6000, rear to front air flow) |
Connectors (each channel) | Input: XLR & 1/4" TRS jacks; barrier strip (XP5000/XP6000) Output: Speakon-type and binding posts |
Indicators | Power: Blue LED Parallel: Yellow LED icon Bridged: Red LED icon CLIP/LIMIT: Red LED PROTECT: Yellow LED -10, -20 and -40dB: Green LEDs |
Controls | |
Front panel | CH1 & CH2 GAIN knobs with 41 detents |
Rear panel | Slide switches: Limiter On/Off Operation modes: Parallel, Stereo, Bridge Mono Grounding / Floating |
Amplifier Protection | Short circuit, thermal, subsonic, RF protection, Output DC offset, Heatsink and transformer over-heat protection, Power on/off muting, Soft start power on |
Power Requirement (depends on region) | 100-120VAC, 220-240VAC, 50/60Hz |
Dimensions (WxHxD) | 482.6 x 133 x 415mm |
Weight | 28.2kg |
In The Box
- Phonic XP 5000 5000W Stereo Power Amplifier
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Phonic XP 5000 5000W Stereo Power Amplifier
- Manufacturer: Phonic
- Model: XP 5000
- SKU: XP 5000
- RM Product #: 59521