(no ratings yet) Thanks for your rating!
Sachtler FSB 10 Fluid Head with Sideload MechanismProduct #40734 | SKU ST-S2045-0001-NZ |(no ratings yet) Thanks for your rating!
- 4 to 12 kg Payload Range
- 100mm Half Ball
- +90 to -75º Tilt Range
- 10 Stepped Counterbalance
- Pan and Tilt Drag 5 Grades Plus 0
The FSB 10 Fluid Head from Sachtler supports payloads up to 12 kg. Designed to accommodate digital cinema-style cameras, such as the Sony FS7, Canon C500, and Blackmagic Ursa Mini. The head offers Sachtler's Sideload mechanism with a sliding range of 4.7"(12 cm). It also features a 10-step counterbalance along with horizontal and vertical 5-step drag controls. In addition, a zero setting on the pan and tilt drag controls allows for unencumbered movement of the head.
The fluid head features a 100mm bowl interface for tripod mounting and incorporates an illuminated bubble level for easy levelling in poor light conditions. A pan handle, which can be mounted on either side of the head, is also included.
Levelling Ball with Flat Base
The fluid head features a 100mm ball for quick levelling on your tripod legs. The ball features a flat base so you can also mount it on a flat surface.
Frictionless Leak-Proof Fluid Damping
Frictionless leak-proof fluid damping with five levels of drag enable precision adjustment to match the needs of your shot. A zero setting allows complete disengagement of drag for fast panning.
Camera Mounting and Balancing
Featuring a sideload mechanism with a sliding range of 4.7"(12 cm) that offers the ease of a touch and go quick release plate and the balancing capability of a sliding baseplate. This sideload setup allows for up to 4.7" of balance plate travel.
|Load Capacity||4 to 12 kg|
|Counter Balance System||Spring-loaded (Stepped counterbalance mechanism)|
|Counter Balance Range||10 steps|
|Centre of Gravity||Maximum payload has been measured at 100 mm|
|Quick Release/Wedge Plate||Sideload camera plate S|
|Tilt Drag||5 steps, plus zero|
|Tilt Range||+90° to -75°|
|Levelling Bubble/Illuminated||Yes/Yes (battery powered)|
|Battery||CR2032 3 V battery for illuminated bubble level (included)|
|Pan Bar||DV 75 single pan bar (included)
Diameter: 0.63" (16 mm) / 1" (28 mm)
Length: 16.9" (430 mm)
|Temperature Range||-40 to 60°C|
|Height||7" (178 mm)|
In The Box
Sachtler FSB 10 Fluid Head with Sideload Mechanism
- Sideload Plate S/Ace Tripod QR Plate
- Tie Down Knob for 100mm Halfball Clamping Bowl
- Pan Handle DV 75
- CR2032 Battery (3 V)
- Limited 1-Year Warranty
Reviews(no ratings yet)
Give it a quick rating:
Thanks for your rating!
Write a review