Rig Components
8Sinn HDMI Cable Clamp CH2 for Camera Cages
- For 8Sinn Sony a7III / a7RIII/ a7SIII/ A1 Cages
In stock
Ships tomorrow
You Pay:
$38.95
8Sinn Half Cage for BMPCC 4K / 6K
- Form-Fitted Half Cage.
- CNC Machined Aluminium.
- 1/4"-20, 3/8"-16 & M4 Mounting Holes.
- Prevents Camera from Twisting.
In stock
Ships tomorrow
You Pay:
$149.00
8Sinn Holder for LaCie Rugged SSD
- Mounting: 1x1/4" + safety pin
- One piece of aluminium
- Form-fitted
- Solid clamp
In stock
Ships tomorrow
You Pay:
$67.95
8Sinn Metabones Support Adapter for Sony a7III / a7RIII Cage
Supports the Metabones Adapter, which often can be overloaded. Easily attachable directly to the cage by two screws.
In stock
Ships tomorrow
You Pay:
$49.95
8Sinn Rod Cap V2 1PC
- The cap serves to close the rod opening.
- Prevents from unwanted contents inside the rods.
- Having this Cap makes inserting the rod into the rod slot much easier.
- Material: stainless steel.
In stock
Ships tomorrow
You Pay:
$27.95
8Sinn Safety NATO Rail with 32mm Arri Rosette
- Mounting solution for ARRI and NATO accessories
- QR system
- NATO standard
- M6 center opening
- Right/left handle adjustment
In stock
Ships tomorrow
You Pay:
$119.00
8Sinn Top Handles Extension Adapter V2
- Arri standard accessory mount.
- Arri locating pins.
In stock
Ships tomorrow
You Pay:
$56.95
9.SOLUTIONS Cheese Plate
- Multipurpose Triangular Rigging Plate
- 9 x 3/8"-16 Threaded Holes on Sides
- 3 x 3/8"-16 Holes on Bottom Corners
- 12 x 3/8" Untapped Holes on Top
- 1.4" Long Slot on Top Surface
Usually ships in 4 - 6 weeks
You Pay:
$159.00
9.SOLUTIONS Cold Shoe Clamp
Enables one to one-handedly mount shoe fitted equipment very easily
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$16.95
You Pay:
$2,699.00
ANDYCINE 15mm LWS Rod Clamp
- 1/4"-20 and 3/8"-16 Threads on Top
- Mount Various Accessories onto Your Rig
In stock
Ships tomorrow
You Pay:
$25.95
ANDYCINE 18cm Magic Arm with Super Clamp
- Mounts on Surfaces 1.5 to 4.3cm Wide
- 18cm Articulating Magic Arm
- Dual Ball Heads Provide 360° Rotation
- 1.5kg Load Capacity
- CNC-Machined Metal
In stock
Ships tomorrow
You Pay:
$48.95
ANDYCINE A-HSM-02 Hot Shoe Mount Mini Ball Head
- Hot Shoe Mountable
- 1/4" to 20 Screw Thread on Top
- 3/8" to 1/4 Hole on Bottom
- 90° Angle Vertical Articulation
- For Camera Rigs & Flash Brackets
- Single-Action Release Lever
In stock
Ships tomorrow
You Pay:
$22.95
ANDYCINE A-HSM-032 Field Monitor Mount with Swivel & Tilt Adjustment for 5 or 7" Monitor
- For 5 and 7" Onboard Monitors
- Shoe Adapter Mount
- 3.3 lb Maximum Payload
- Swivels 360° / Tilts 180°
- Protective Rubber Padding on Top
- Locks in Any Position with Allen Wrench
In stock
Ships tomorrow
You Pay:
$46.95
ANDYCINE A-QRBH-01 Mini Quick Release 1/4"-20 Male to Female
- Attaches Monitors to Articulating Arms
- Two-Part Design with Pull-Down Collar
- Secure Notch and Lock Mechanism
- Also Works with Various Other Gear
- Aluminium Construction
Usually ships in 4 - 6 weeks
You Pay:
$22.95
ANDYCINE A-SC-05 Vlogger Universal Adapter for Smartphones & SSDs
- Adjustable to Hold Most Phones and SSDs
- Shoe Mount and 1/4"-20 Thread on Bottom
- Quick Release Loosening Wheel
In stock
Ships tomorrow
You Pay:
$46.95
ANDYCINE A-SC-07 Adjustable Cold Shoe Phone Mounting Bracket for Camera Rig
- Robust Aluminium Smartphone Mount
- Attaches to Camera and Cage Shoe Mounts
- Cold Shoe on Top for Accessories
- 1/4"-20 Accessory Mounting Holes on Back
- Locking Tilt and Pan Adjustment
In stock
Ships tomorrow
You Pay:
$43.95
ANDYCINE A-TILTARM Tilt Arm for 4.5 to 5.7" Monitors
- Supports ANDYCINE 4.5 to 5.7" Monitors
- Tilts 360° for Optimal Viewing
- Secure Camera-Top Mounting
- 1 x Accessory Shoe Mount
- Side 1/4"-20 Monitor Mount
In stock
Ships tomorrow
You Pay:
$31.95
ANDYCINE A-VMBP-01 Pocket V-Lock Assembly Kit
- Female V-Lock Receiver
- Male V-Lock Mounting Wedge
- Supports up to 10kg
- 21 x Attachment Points
- Receiver Has 1/4" Mounting Slots
- 1/4"-20, 3/8"-16, M3, M4 Mounting Holes
In stock
Ships tomorrow
You Pay:
$48.95
ANDYCINE A-VMBP-02 Mini V-Lock Assembly Kit
- Female V-Lock Receiver
- Male V-Lock Mounting Wedge
- Supports up to 10kg
- 64 x Attachment Points
- Receiver Has 1/4" Mounting Slots
- 1/4"-20, 3/8"-16, M3, M4 Mounting Holes
In stock
Ships tomorrow
You Pay:
$51.95
ANDYCINE A-VMC Universal V-Mount Battery Clamp
- Clamps up to 1.4" O.D. Stand/Tripod Leg
- Allows Powering Nearby Lights/Monitors
- Textured Rubber-Padded Jaws
- Aluminium Construction
In stock
Ships tomorrow
You Pay:
$56.95
ANDYCINE A-VRM23 Rhino Monitor Mount
- Supports up to 5kg
- 180° Tilt
- 360° Rotation
- Mounts via 1/4"-20 Female or Male
- 1/4"-20 Male for Attaching Accessories
In stock
Ships tomorrow
You Pay:
$48.95
ANDYCINE A-VVM302 Vlogger Viper Articulating Magic Arm
- Adjustable Ball Heads on Both Ends
- 1/4"-20 Mounting Screw at Each End
- Load Capacity: 1.5kg
- Thumbwheels for Easy Mounting
- Large T-Handle to Secure Ball Heads
- T-Handle Has 3/8"-16 Threaded Holes
In stock
Ships tomorrow
You Pay:
$60.95
ANDYCINE Cherry Cable Management Locking Clamp for DSLR and Mirrorless Cameras
- Two Clamping Surfaces in One Clamp
- Fixed Clamp for One 3mm Diameter Cable
- Adjustable Clamp for 1.6 to 7mm Range
- Attaches with 1/4"-20 Threaded Screw
In stock
Ships tomorrow
You Pay:
$31.95
ANDYCINE Cold Shoe Mount Adapter
- Works with Vlogger R50 Magic Arm
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$42.95
ANDYCINE Dual-Handle Gimbal Grip for DJI Ronin-S & Moza Air
- 2 x 1/4"-20 Accessory Ring Mounts
- Nonslip Handgrips with 1/4"-20 Threads
- For Standard or Low-Mode Use
- Aluminium Alloy Construction
Usually ships in 4 - 6 weeks
You Pay:
$159.00
ANDYCINE Field Monitor Holder with Shoe Adapter & Anti-Twist Mount for 5/7" Monitors
- Adjustable On-Camera Monitor Mount
- 1/4"-20 Mounting Screw & Anti-Twist Pin
- 360° Rotation, 180° Tilt Range
- Shoe Adapter Mount with 1/4"-20 Thread
- Lockable Pan/Tilt with Allen Wrench
- 3kg Weight Capacity, Knurled Knobs
In stock
Ships tomorrow
You Pay:
$60.95
ANDYCINE Field Monitor Quick Release
- Attaches Monitors to Articulating Arms
- Two-Part Design with Release Button
- Also Works with Various Other Gear
- Aluminium and Steel Construction
Usually ships in 4 - 6 weeks
You Pay:
$28.95
ANDYCINE Hot Shoe to 1/4"-20 Male Post Adapter
- Attaches to Camera Hot Shoe
- Converts Hot Shoe to 1/4"-20 Male Post
- Locking Disks
- Lightweight, Durable Aluminium
Usually ships in 2 - 3 weeks
You Pay:
$23.95
ANDYCINE Mini Ball Head with Cold Shoe Adapter to 1/4"-20 Mount
- Load Capacity: 2.5kg
- Single-Action Mini Ball Head
- Aluminium-Constructed Head
- 90° Tilt, 360° Rotation
- 1/4"-20 Mounting Socket
In stock
Ships tomorrow
You Pay:
$43.95
ANDYCINE Mini Double Ball Joint Articulating Arm
- For Mounting Monitors, Lights & More
- 3.8" Length
- Swivelling Ball Joints with 1/4"-20 Screw
- Rubber-Padded Mounting Platforms
In stock
Ships tomorrow
You Pay:
$16.95
ANDYCINE Mini Double Ball Joint Articulating Arm Short
- For Mounting Monitors, Lights & More
- 2.8" Length with One End Folded
- Swivelling Ball Joints with 1/4"-20 Screw
- Single Rubber-Padded Mounting Platforms
In stock
Ships tomorrow
You Pay:
$13.95
ANDYCINE Quick Release with Plate
- Attaches Monitors to Articulating Arms
- 1/4"-20 Male to 1/4"-20 Female
- Also Works with Various Other Gear
- Aluminium Construction
In stock
Ships tomorrow
You Pay:
$22.95
ANDYCINE R50-0 Mini Quick Release Plate with 1/4-20 Screw (2 Pieces)
- Works with Vlogger R50 Magic Arm
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$36.95
ANDYCINE R50-4 Hot Shot Mount Adapter
- Works with Vlogger R50 Magic Arm
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$36.95
ANDYCINE Rugged Articulating Magic Arm (18cm)
- Attach Accessories to Camera Rig
- Fully Extends up to 18cm
- 1/4"-20 Screws on Either End
- Supports Accessory up to 1.5kg
- 360° Ball Head on Either End
- 360° Rotation on Centre Joint
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$42.95
ANDYCINE Rugged Articulating Magic Arm (28cm)
- Attach Accessories to Camera Rig
- Fully Extends up to 28cm
- 1/4"-20 Screws on Either End
- Supports Accessory up to 1.5kg
- 360° Ball Head on Either End
- 360° Rotation on Centre Joint
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$51.95
ANDYCINE Super Clamp Mount for 15 to 40mm Rods
- For Gimbals, Stands & Tripod Legs
- Mounts onto Standard 15 to 40mm Rod/Pole
- 2.5kg Total Load Capacity
- Nonslip Rubber Inside Clamp
- Easy Lock & Release T-Handle
- Anti-Twist 1/4"-20 Accessory Threads
Usually ships in 4 - 6 weeks
You Pay:
$37.95
ANDYCINE Swivel and Tilt Monitor Mount with Shoe Adapter for 5 and 7" Monitors
- Adjustable On-Camera Monitor Mount
- 360° Rotation, 176° Tilt Range
- 1/4"-20 Monitor Mounting Screw
- Shoe Adapter Mount with 1/4"-20 Thread
- Lockable Pan/Tilt with Allen Wrench
- 3kg Weight Capacity, Knurled Knobs
In stock
Ships tomorrow
You Pay:
$46.95
ANDYCINE Triple Shoe Mount with 1/4"-20 Ports
- 3 Shoe Mounts & 1/4"-20 Threads for Accessories
Usually ships in 4 - 6 weeks
You Pay:
$19.95
ANDYCINE WBS-Grip-02 Handle for Zhiyun-Tech WEEBILL-S Gimbal
- Designed for WEEBILL-S Gimbal
- Rear Grip for Low-Angle Shots
- Secure 1/4"-20 Anti-Twist Mount
- Tool-Free Knurled Thumbwheel
- Rubberised Grip & Anti-Scratch Padding
- Weighs Only 270g
In stock
Ships tomorrow
You Pay:
$54.95
AVMATRIX Tally Lamp for TS3019 Wireless Multi-Camera Tally System
- Four Levels of Brightness
- Front and Rear Indicators
- Signal Strength and Battery Status
- 1/4"-20 Thread for Hot Shoe Mount
- RS-485 Protocol, Tally Output
Contact us for an ETA
Price On Request
Contact us for more information
AVMATRIX Wireless Multi-Camera Tally Light System (4 x Tally Lamps)
- 1 x Tally Box, 4 x Tally Lamps
- 200m Wireless Transmission
- GPIO, USB, RS-232/485 Interfaces
- Compatible with vMix and Switchers
- Front and Rear Lamp Indicators
In stock
Ships tomorrow
You Pay:
$919.00
AVMATRIX Wireless Multi-Camera Tally Light System (6 x Tally Lamps)
- 1 x Tally Box, 6 x Tally Lamps
- 200m Wireless Transmission
- GPIO, USB, RS-232/485 Interfaces
- Compatible with vMix and Switchers
- Front and Rear Lamp Indicators
- Powered via USB Type-C or Battery
Usually ships in 2 - 4 weeks
You Pay:
$1,349.00
Accsoon Multi-Directional Cold Shoe Adapter
- Shoe Adapter Mount
- 2kg Maximum Payload
- Tilts 170-Degrees
- Locks in Any Position with Allen Wrench
- Durable Aluminium Construction
Usually ships in 2 - 3 weeks
You Pay:
$24.95
Atomos AtomX 5 and 7" Monitor Mount
- Mounts Atomos Shinobi and Ninja V
- Mounts Atomos Flame and Inferno Series
- Quick Release Plate
- 360° Pan and 180° Tilt
Usually ships in 2 - 3 weeks
You Pay:
$125.00
Barska ACCU-Grip Camera Handle Pistol Grip
- For Camera Stability and Manoeuvrability
- Also for Compatible Scopes & Binoculars
- Mounts to the Bottom of Any Camera
- Thumbwheel for Easy Attachment
- 1/4"-20 Thread for Mounting on a Tripod
Usually ships in 4 - 6 weeks
You Pay:
$42.95
Benro PU56 Arca Style QR Plate for GX Series Ball Head
- Benro Arca Style PU56 Plate for GX head
In stock
Ships tomorrow
You Pay:
$35.95
BirdDog Mini Camera Mount
- Mount BirdDog Mini on 1/4"-20 Supports.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$76.95
Blackmagic Camera URSA EVF - 1/4" Thumbscrew
Available to order today
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$23.95
Blackmagic Camera URSA EVF - Tensioning Screws
Available to order today
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$23.95
Blackmagic Camera URSA EVF Mounting Plate
Available to order today
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$109.00
Blackmagic Design Handgrip for URSA Mini Camera
Available to order today
In Stock with Supplier
Usually ships in 2 - 3 working days
$309.00
You Pay:
$299.00
$309.00
Blackmagic Design PL Mount Shim Kit
- Change the flange focal distance of PL lenses
In Stock with Supplier
Usually ships in 2 - 3 working days
$87.95
You Pay:
$86.00
$87.95
Blackmagic Design Pocket 4K/6K Cinema Camera Battery Grip
New camera grip attaches to any Blackmagic Pocket Cinema Camera 4K or 6K and holds 2 L-Series batteries for over 2 hours of non-stop shooting!
In Stock with Supplier
Usually ships in 2 - 3 working days
$399.00
You Pay:
$389.00
$399.00
Blackmagic Design Shoulder Kit Bolts for URSA Mini (11-Pack)
- Use as Spares or Replacements
- Four Types of Screws
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$31.95
Blackmagic Design Shoulder Mount Kit for the URSA Mini
- Shoulder Pad for ENG/Doc-Style Shooting
- VCT Wedge Compatible Quick-Release
- 15mm LWS Rod Clamps
- Accessory Rosettes on Both Sides
- Includes Top Handle
In Stock with Supplier
Usually ships in 2 - 3 working days
$609.00
You Pay:
$599.00
$609.00
Blackmagic Design URSA Broadcast ENG Kit
- Protects Camera Top Vents
- Rugged Run-and-Gun ENG Handle
- Multiple 3/8"-16 Mounting Points
- Rotating Light Mount Included
- Provides Microphone Mount
- Side Panel Cradle for Accessories
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$379.00
Blackmagic Design URSA Mini Top Handle
- Fits URSA Mini / Mini Pro Camera
- 1/4"-20 Mounting Threads
- Convenient for Low-Angle Shooting
- Made of Magnesium
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$130.00
Blackmagic Extension Arm for URSA Mini/Mini Pro Camera
Extend the grip of your URSA Mini or URSA Mini Pro
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$199.00
Blackmagic URSA Mini Mic Mount
- Included flat mount and angle mount
- Screws for securing mounts to camera
- Mic holder features rubber o-ring bands
In Stock with Supplier
Usually ships in 2 - 3 working days
$209.00
You Pay:
$205.00
$209.00
Blackmagic Wing Nut Spares for URSA Mini (Set of 4)
- Use as Spares or Replacements
- Use with various URSA mini accessories
In stock
Ships tomorrow
You Pay:
$149.00
Bright Tangerine 15mm Lightweight Rod Bracket Type 3
- Convert Misfit, Misfit Atom, & Viv/Viv 5" Matte Boxes to Rod-Mount
- Also Compatible with 15 mm & 19 mm Strummer Studio Brackets
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$239.00
Bright Tangerine LeftField 3 KASBAH Shoulder Pad + 15mm LWS/19mm Studio Handle Kit
- Shoulder Pad, ARRI Dovetail Riser
- Dual Handgrip Kit
- Mount on 15mm LWS or 19mm Studio Rods
- Works with LeftField 3 15mm Baseplate
- Durable Aluminium & Steel Construction
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,549.00
Bright Tangerine Mini Axl Kit for Sony FX6
- Replaces Original FX6 Monitor Bracket
- Adds Durable & Adjustable Support
- 15mm Rod Mount, NATO Rail
- 360° Rotation, Sony 8T Mount
- 3/8"-16 Mounting Thread, Drag Adjustment
- Mounts onto Sony FX6 Top Handle
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$989.00
Bright Tangerine Run/Stop Top Plate for RED KOMODO
- Plate for Mounting NATO Handle/Accessory
- 3-Pin Fischer Port for Run/Stop Support
- Pass-Through Pogo Pins to Camera
- Integrated NATO Rail
- 1/4"-20 & 3/8"-16 Accessory Threads
- Works with RED KOMODO Outrigger Handle
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$299.00
Bright Tangerine Strummer DNA 15mm Studio Rod Bracket
- Rod Mount Bracket for Strummer DNA Matte Box
- Allows Mounting on a 15 mm Studio Setup
- Hard Anodised Aluminium
Special Order
You Pay:
$489.00
Bright Tangerine Strummer DNA 19mm Studio Rod Bracket
Available to order from Rubber Monkey today
Special Order
You Pay:
$489.00
Canon LH-E1 Lens Holder for RF 24-105mm Lens
- Holds lens securely while shooting
Usually ships in 4 - 6 weeks
You Pay:
$349.00
Core SWX Canon EOS Cine V-Mount Plate
- For Canon EOS Cine cameras with 4-pin XLR Input
- Input: 11.9vdc-16.8vdc, Unregulated
- Output for camera: 11.9vdc-16.8vdc, Unregulated
- Powertap: DC 11.9-17v, Unregulated
- USB: DC 5v, Unregulated
- 272g
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$540.00
Core SWX Gold Mount Plate Set for Atomos Sumo
- 2 x Gold Mount Plates
- 4-Pin XLR Connections
Special Order
You Pay:
$260.00
DJI R Roll Axis Counterweight Set
- Provides counterweight solutions for camera setups that cannot be balanced directly on the roll axis
Contact us for an ETA
Price On Request
Contact us for more information
DJI R Twist Grip Dual Handle
- Equipped with NATO ports to enable holding of DJI RS 2/DJI RSC 2 in various configurations
- Horizontal arms include 3/8''-16 and 1/4''-20 tapped holes and cold shoe ports for different accessories
On Backorder
You Pay:
$179.00
DJI Ronin 4D Handgrip Combo
- For Ronin 4D 4-Axis Cinema Camera 6K/8K
- For DJI High-Bright Remote Monitor
- Focus Wheel with Electromagnetic Damping
- Precision Gimbal Control
- Run/Stop Function
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$919.00
DJI Ronin-S Camera Riser
Attaches under the camera to mount and balance onto the Ronin-S.
Contact us for an ETA
Price On Request
Contact us for more information
Delkin Devices Fat Gecko Triple Suction Cup Mount
- Mount Combines Fat Gecko Original & Mini
- Works on Smooth, Non-Porous Surfaces
- Three-Point Mount Increases Stability
- Three Industrial Locking Suction Cups
- Features Six Adjustable Points
- Slide & Lock Design Secures Connection
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
E-Image Quick Release Adapter with Plate
- Retrofit Equipment to E-Image QR System
- QR Plate is Compatible with Select Heads
- Mounts Using 1/4"-20 and 3/8"-16 Screws
- QR Safety Mechanism
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$68.95
Easyrig MM005-A Spare Part Mid Nylon Block, Complete Unit with Pivot Stop
- Spare Part MM005-A
Contact us for an ETA
Price On Request
Contact us for more information
Edelkrone StandPLUS Camera Stand
- Ready to use in seconds
- Overhead (bird's eye) shots
- No knobs or buttons
- Get any angle in a second
- Move around freely
Usually ships in 4 - 6 weeks
You Pay:
$969.00
Elgato Cold Shoe
- Compatible Cold Shoe
- Swivels 360° & Tilts 180°
- Built-In 1/4"-20 Threaded Hole
- Made of Aluminium Alloy
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$58.95
Explorer AX-01 Aura Explorer Mini Ball Head
- Mount Accessories to Camera or Tripod
- Shoe Mount and 1/4"-20 Mounting Screw
- Mounts to 1/4"-20 Quick Release Plate
- 90° Notch for Multiple Positions
- Tilts 135° and Pans 360°
Usually ships in 2 - 3 weeks
You Pay:
$49.95
Explorer SX-MA Sidekick Magic Arm
- Durable Aluminium Articulating Arm
- 1/4"-20 Screw Mount on Each End
- 4 x Tilting/Rotating Ball Joints
- 1.8kg Maximum Load, Weighs Only 85g
- Two Large Locking Knobs
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$38.95
FujiFilm MHG-XT5 Metal Hand Grip for XT-5 Mirrorless Camera
- Enhanced Handling and Camera Control
- Provides Additional Clearance
- Battery and Memory Card Access
- Arca-Compatible Dovetail Tripod Mount
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$249.00
GVM Aluminum Alloy Ajustable Magic Arm with 1/4" Screw
- Dual Ball Heads
- 1/4" Connectors at Each End
- Supports up to 4kg
Usually ships in 8 - 12 weeks
You Pay:
$87.95
GVM C320 Turtle-Base C-Stand & Grip Arm Kit (10.5' Black)
- Load Capacity: 20kg
- Maximum Height: 3200mm
- Minimum Height: 1350mm
- Weight: 10kg
- Sections: 3
Contact us for an ETA
You Pay:
$369.00
You Pay:
$180.00
IDX A-CP(J) Universal Mount Cheese Plate for use with ET-PV2BM
Versatile Cheese Plate and Clamp
In Stock with Supplier
Usually ships in 4 - 6 weeks
You Pay:
$229.00
Insta360 Cold Shoe Mount for ONE RS Action Camera
- For Insta360 ONE RS Action Camera
- 1 x Cold Shoe Mount
- Mount Microphone or Light on Camera
- Lightweight Construction
Usually ships in 1 - 2 weeks
You Pay:
$49.95
JJC Threaded Deluxe Soft Release Button (Grey Plated with Black Microfibre Leather Surface)
- Pure copper material with microfibre leather
- Effectively reduces camera vibration
- Decorates your camera
- Comes with 2 rubber rings
Usually ships in 2 - 3 weeks
You Pay:
$18.95
JJC Thumbs Up Grip for FUJI X-T5, X-T4 and X-T3
- For FUJI X-T5, X-T4 and X-T3
- Secure hold during shooting
- Anodised aluminium alloy construction
- Microfibre leather
- Easy attachment and detachment
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$49.95
K&M 01-82-828-55 M6 Knurled Knob
- Can be used as either a replacement or spare
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$9.95
K-Tek KTBAR Aluminum Shoe Bar
- Measures 15.24cm
- Mounts Multiple Accessories onto Cameras
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$72.95
K-Tek KTBAR9 Aluminum Camera Shoe Bar (22.86cm)
- Measures 22.86cm Long
- Mounts Multiple Accessories
- Fits Any Camera Shoe
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$78.95
Kessler Camera Platform Extender for Pocket Jib Traveler
Easily mount larger bodied cameras to the Pocekt Jib Traveler
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$84.95
Kessler Crane CineShooter Smart Handle
- Provides Grip for CineShooter Head
- Button Enables Use of FreeMotion Mode
- Enables Manual Repositioning of Axes
- Coiled Control Cable with Mini Jack
- 1/4"-20 Screws & Allen Wrench Included
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$309.00
Kessler Crane Extension Kit for 15.2cm Mitchell Riser & Shuttle Dolly Riser (15.2cm, 3-Pack)
Available to Order From Rubber Monkey Today
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$209.00
Kessler Crane KillShock Matte Black Extreme Heavy-Duty Shock Module
- For KillShock Isolator System
- For MōVI XL or Ronin 2
- Extreme Heavy-Duty Isolation Level
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$199.00
Kessler Crane KillShock to Black Arm Adapter Plate
- Inverts KillShock on FLOWCINE Black Arm
- For KillShock Camera Isolator System
- 4 x 3/8"-16 Adapter Plate Screws
- Aluminium Construction
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$259.00
Kessler Crane Kwik Plate Adapter for MoVI M5 Stabiliser
Available to Order From Rubber Monkey Today
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$249.00
Kessler Crane Leg Clamps for Kwik Rail System (Set of 4)
- Attach Kwik Rail to Shuttle Dolly End Clamps
- Quickly adjust leg angle for shuttle dolly height
- Extend leg length by attaching two pieces of Kwik Rail
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$979.00