Camera Rigs & Support

• The cap serves to close the rod opening.
• Prevents from unwanted contents inside the rods.
• Having this Cap makes inserting the rod into the rod slot much easier.
• Material: stainless steel.

• Mounting solution for ARRI and NATO accessories
• QR system
• NATO standard
• M6 center opening
• Right/left handle adjustment

• Form-Fitted for Nikon Z6/Z7/Z6 II/Z7 II
• Black Crow Top Handle Included
• Multiple 1/4"-20 and M4 Mounting Points
• 3 x Cold Shoe Mounts
• 3/8"-16 Mounting with ARRI Locating Pins
• Safety NATO Rail Included

• Mounting: 1x1/4" + safety pin
• One piece of aluminium
• Form-fitted
• Solid clamp

• Arri standard accessory mount.
• Arri locating pins.

• For 8Sinn Sony a7III / a7RIII/ a7SIII/ A1 Cages

• Form-Fitted Half Cage.
• CNC Machined Aluminium.
• 1/4"-20, 3/8"-16 & M4 Mounting Holes.
• Prevents Camera from Twisting.

• Curve Radius 1.5m
• Pan Range 140cm

• Multipurpose Triangular Rigging Plate
• 9 x 3/8"-16 Threaded Holes on Sides
• 3 x 3/8"-16 Holes on Bottom Corners
• 12 x 3/8" Untapped Holes on Top
• 1.4" Long Slot on Top Surface

• For 9.SOLUTIONS Mounting Accessories
• 1/4"-20 Camera Screw Connector
• Supports DSLR-Sized Cameras
• Attaches to Quick Mount Receiver

• Four Levels of Brightness
• Front and Rear Indicators
• Signal Strength and Battery Status
• 1/4"-20 Thread for Hot Shoe Mount
• RS-485 Protocol, Tally Output

• 1 x Tally Box, 4 x Tally Lamps
• 200m Wireless Transmission
• GPIO, USB, RS-232/485 Interfaces
• Compatible with vMix and Switchers
• Front and Rear Lamp Indicators

• 1 x Tally Box, 6 x Tally Lamps
• 200m Wireless Transmission
• GPIO, USB, RS-232/485 Interfaces
• Compatible with vMix and Switchers
• Front and Rear Lamp Indicators
• Powered via USB Type-C or Battery

• Shoe Adapter Mount
• 2kg Maximum Payload
• Tilts 170-Degrees
• Locks in Any Position with Allen Wrench
• Durable Aluminium Construction

• Camera Slider with Brushless Motor
• 42cm Travel Distance
• 55° Panorama, Loop Mode, Time-Lapse
• 4kg Horizontal Load Capacity
• NP-F Battery Plate, DC Input
• USB-C Power Output

• Camera Slider with Brushless Motor
• 22cm Travel Distance
• 55° Panorama, Loop Mode, Time-Lapse
• 4kg Horizontal Load Capacity
• NP-F Battery Plate, DC Input
• USB-C Power Output

• For Mounting Monitors, Lights & More
• 2.8" Length with One End Folded
• Swivelling Ball Joints with 1/4"-20 Screw
• Single Rubber-Padded Mounting Platforms

• For Mounting Monitors, Lights & More
• 3.8" Length
• Swivelling Ball Joints with 1/4"-20 Screw
• Rubber-Padded Mounting Platforms

• Female V-Lock Receiver
• Male V-Lock Mounting Wedge
• Supports up to 10kg
• 21 x Attachment Points
• Receiver Has 1/4" Mounting Slots
• 1/4"-20, 3/8"-16, M3, M4 Mounting Holes

• Adjustable to Hold Most Phones and SSDs
• Shoe Mount and 1/4"-20 Thread on Bottom
• Quick Release Loosening Wheel

• For 5 and 7" Onboard Monitors
• Shoe Adapter Mount
• 3.3 lb Maximum Payload
• Swivels 360° / Tilts 180°
• Protective Rubber Padding on Top
• Locks in Any Position with Allen Wrench

• For Gimbals, Stands & Tripod Legs
• Mounts onto Standard 15 to 40mm Rod/Pole
• 2.5kg Total Load Capacity
• Nonslip Rubber Inside Clamp
• Easy Lock & Release T-Handle
• Anti-Twist 1/4"-20 Accessory Threads

• Robust Aluminium Smartphone Mount
• Attaches to Camera and Cage Shoe Mounts
• Cold Shoe on Top for Accessories
• 1/4"-20 Accessory Mounting Holes on Back
• Locking Tilt and Pan Adjustment

• Designed for WEEBILL-S Gimbal
• Rear Grip for Low-Angle Shots
• Secure 1/4"-20 Anti-Twist Mount
• Tool-Free Knurled Thumbwheel
• Rubberised Grip & Anti-Scratch Padding
• Weighs Only 270g

• Supports up to 5kg
• 180° Tilt
• 360° Rotation
• Mounts via 1/4"-20 Female or Male
• 1/4"-20 Male for Attaching Accessories

• Female V-Lock Receiver
• Male V-Lock Mounting Wedge
• Supports up to 10kg
• 64 x Attachment Points
• Receiver Has 1/4" Mounting Slots
• 1/4"-20, 3/8"-16, M3, M4 Mounting Holes

• Clamps up to 1.4" O.D. Stand/Tripod Leg
• Allows Powering Nearby Lights/Monitors
• Textured Rubber-Padded Jaws
• Aluminium Construction

• Adjustable On-Camera Monitor Mount
• 360° Rotation, 176° Tilt Range
• 1/4"-20 Monitor Mounting Screw
• Shoe Adapter Mount with 1/4"-20 Thread
• Lockable Pan/Tilt with Allen Wrench
• 3kg Weight Capacity, Knurled Knobs

• Load Capacity: 2.5kg
• Single-Action Mini Ball Head
• Aluminium-Constructed Head
• 90° Tilt, 360° Rotation
• 1/4"-20 Mounting Socket

• Adjustable Ball Heads on Both Ends
• 1/4"-20 Mounting Screw at Each End
• Load Capacity: 1.5kg
• Thumbwheels for Easy Mounting
• Large T-Handle to Secure Ball Heads
• T-Handle Has 3/8"-16 Threaded Holes

• Adjustable On-Camera Monitor Mount
• 1/4"-20 Mounting Screw & Anti-Twist Pin
• 360° Rotation, 180° Tilt Range
• Shoe Adapter Mount with 1/4"-20 Thread
• Lockable Pan/Tilt with Allen Wrench
• 3kg Weight Capacity, Knurled Knobs

• Two Clamping Surfaces in One Clamp
• Fixed Clamp for One 3mm Diameter Cable
• Adjustable Clamp for 1.6 to 7mm Range
• Attaches with 1/4"-20 Threaded Screw

• Supports ANDYCINE 4.5 to 5.7" Monitors
• Tilts 360° for Optimal Viewing
• Secure Camera-Top Mounting
• 1 x Accessory Shoe Mount
• Side 1/4"-20 Monitor Mount

• Attaches Monitors to Articulating Arms
• Two-Part Design with Pull-Down Collar
• Secure Notch and Lock Mechanism
• Also Works with Various Other Gear
• Aluminium Construction

• Hot Shoe Mountable
• 1/4" to 20 Screw Thread on Top
• 3/8" to 1/4 Hole on Bottom
• 90° Angle Vertical Articulation
• For Camera Rigs & Flash Brackets
• Single-Action Release Lever

• 2 x 1/4"-20 Accessory Ring Mounts
• Nonslip Handgrips with 1/4"-20 Threads
• For Standard or Low-Mode Use
• Aluminium Alloy Construction

• Mounts on Surfaces 1.5 to 4.3cm Wide
• 18cm Articulating Magic Arm
• Dual Ball Heads Provide 360° Rotation
• 1.5kg Load Capacity
• CNC-Machined Metal

• Attaches Monitors to Articulating Arms
• Two-Part Design with Release Button
• Also Works with Various Other Gear
• Aluminium and Steel Construction

• Attaches Monitors to Articulating Arms
• 1/4"-20 Male to 1/4"-20 Female
• Also Works with Various Other Gear
• Aluminium Construction

• 1/4"-20 and 3/8"-16 Threads on Top
• Mount Various Accessories onto Your Rig

• Attach Accessories to Camera Rig
• Fully Extends up to 28cm
• 1/4"-20 Screws on Either End
• Supports Accessory up to 1.5kg
• 360° Ball Head on Either End
• 360° Rotation on Centre Joint

• Works with Vlogger R50 Magic Arm

• Works with Vlogger R50 Magic Arm

• Works with Vlogger R50 Magic Arm

• Attach Accessories to Camera Rig
• Fully Extends up to 18cm
• 1/4"-20 Screws on Either End
• Supports Accessory up to 1.5kg
• 360° Ball Head on Either End
• 360° Rotation on Centre Joint

• 3 Shoe Mounts & 1/4"-20 Threads for Accessories

• Attaches to Camera Hot Shoe
• Converts Hot Shoe to 1/4"-20 Male Post
• Locking Disks
• Lightweight, Durable Aluminium

• Mounts Atomos Shinobi and Ninja V
• Mounts Atomos Flame and Inferno Series
• Quick Release Plate
• 360° Pan and 180° Tilt

• For Camera Stability and Manoeuvrability
• Also for Compatible Scopes & Binoculars
• Mounts to the Bottom of Any Camera
• Thumbwheel for Easy Attachment
• 1/4"-20 Thread for Mounting on a Tripod

• Benro Arca Style PU56 Plate for GX head

• Capture linear movements
• Load capacity: 8 kg
• Smooth and quiet operation
• Integrated bubble level

• Mount BirdDog Mini on 1/4"-20 Supports.

• For Camera-Mounting BD Encoders/Decoders.
• Fits BirdDog 4K HDMI, 4K SDI, and Quad.
• Attaches to Ball Heads, Arms, Etc.
• 1/4"-20 Mounting Thread.

• Protects Camera Top Vents
• Rugged Run-and-Gun ENG Handle
• Multiple 3/8"-16 Mounting Points
• Rotating Light Mount Included
• Provides Microphone Mount
• Side Panel Cradle for Accessories

• Included flat mount and angle mount
• Screws for securing mounts to camera
• Mic holder features rubber o-ring bands

• Fits URSA Mini / Mini Pro Camera
• 1/4"-20 Mounting Threads
• Convenient for Low-Angle Shooting
• Made of Magnesium

• Change the flange focal distance of PL lenses

• Use as Spares or Replacements
• Use with various URSA mini accessories

• Shoulder Pad for ENG/Doc-Style Shooting
• VCT Wedge Compatible Quick-Release
• 15mm LWS Rod Clamps
• Accessory Rosettes on Both Sides
• Includes Top Handle

• Use as Spares or Replacements
• Four Types of Screws

• Plate for Mounting NATO Handle/Accessory
• 3-Pin Fischer Port for Run/Stop Support
• Pass-Through Pogo Pins to Camera
• Integrated NATO Rail
• 1/4"-20 & 3/8"-16 Accessory Threads
• Works with RED KOMODO Outrigger Handle

• Convert Misfit, Misfit Atom, & Viv/Viv 5" Matte Boxes to Rod-Mount
• Also Compatible with 15 mm & 19 mm Strummer Studio Brackets

• Rod Mount Bracket for Strummer DNA Matte Box
• Allows Mounting on a 15 mm Studio Setup
• Hard Anodised Aluminium

• Replaces Original FX6 Monitor Bracket
• Adds Durable & Adjustable Support
• 15mm Rod Mount, NATO Rail
• 360° Rotation, Sony 8T Mount
• 3/8"-16 Mounting Thread, Drag Adjustment
• Mounts onto Sony FX6 Top Handle

• Shoulder Pad, ARRI Dovetail Riser
• Dual Handgrip Kit
• Mount on 15mm LWS or 19mm Studio Rods
• Works with LeftField 3 15mm Baseplate
• Durable Aluminium & Steel Construction

• Holds lens securely while shooting

• For Use with Axis360 Motor & Controller
• Balance Camera for Pans, Tilts & Slides
• Two Quick-Release Clamps
• Two L Brackets
• One Arca-Type Quick-Release Plate

• Set Comes with Three Suction Cups
• Tight Grip Suction Technology
• Compatible with GorillaPod Focus Tripod
• Perfect for Attaching to Uneven Surfaces

• 3 Wheels That Attach To A Mini Tripod
• Variety Of Fluid Motion Shots
• Arcing
• Sliding
• Rolling

• Multi-Directional Mini Dolly
• Ruler Markings for Aligning Wheels
• Allows Fluid Arcing, Tracking, Panning
• Smoothly Pulls Subjects into Focus
• Ball Head Included

• For Canon EOS Cine cameras with 4-pin XLR Input
• Input: 11.9vdc-16.8vdc, Unregulated
• Output for camera: 11.9vdc-16.8vdc, Unregulated
• Powertap: DC 11.9-17v, Unregulated
• USB: DC 5v, Unregulated
• 272g

• 2 x Gold Mount Plates
• 4-Pin XLR Connections

• Provides counterweight solutions for camera setups that cannot be balanced directly on the roll axis

• Equipped with NATO ports to enable holding of DJI RS 2/DJI RSC 2 in various configurations
• Horizontal arms include 3/8''-16 and 1/4''-20 tapped holes and cold shoe ports for different accessories

• For Ronin 4D 4-Axis Cinema Camera 6K/8K
• For DJI High-Bright Remote Monitor
• Focus Wheel with Electromagnetic Damping
• Precision Gimbal Control
• Run/Stop Function

• Mount Combines Fat Gecko Original & Mini
• Works on Smooth, Non-Porous Surfaces
• Three-Point Mount Increases Stability
• Three Industrial Locking Suction Cups
• Features Six Adjustable Points
• Slide & Lock Design Secures Connection

• Retrofit Equipment to E-Image QR System
• QR Plate is Compatible with Select Heads
• Mounts Using 1/4"-20 and 3/8"-16 Screws
• QR Safety Mechanism

• Spare Part MM005-A

Provides Stop-Motion Capability, Supports Shoot-Move-Shoot, Integrated Focus Adjustment Knob, Supports Dragonframe Software, USB Power

• Ultra Flexible camera positioning solution
• 2.5 kg (5.5 lb) carrying capacity
• Easily positionable with no knobs to tighten
• Can be attached to tripods or used as a stand on it own
• Built-in spirit level, markers for pan angle

• Pocket-sized acrobat stand
• Max load: 1.5kg
• Hand-held support
• 50cm vertical extension

• Battery Power for the HeadPLUS
• Single V-Mount Battery Plate
• Two D-Tap Ports to Power Accessories

• Battery Power for the HeadPLUS
• Single Gold Mount Battery Plate
• Two D-Tap Ports to Power Accessories

• Connects Multiple edelkrone Systems to Computers via Link Adapter
• Connects Multiple edelkrone Systems to Each Other with edelkrone App
• Low Latency Connection, No Environmental Wireless Interference
• All Ports Can be Used as Inputs or Outputs

• 1.3kg load capacity
• Ready to use in seconds
• Move around freely
• No knobs or buttons

• Requires HeadONE for operation
• Transform HeadONE into 2-axis head
• Small and compact
• Captivating and engaging footage

• Ultra-Compact 360° Motorised Pan System
• Remote Controllable via iOS/Android App
• Desktop Mount or Attach to Other Gear
• Motion-Controlled Panning Shots

• Quiet, Portable Motorised Slider
• 27cm Length, 20cm Travel Distance
• Supports up to 9kg Horizontally
• Supports up to 2.3kg Vertically
• Backlash-Free Gears, Dual Motor Design

• Attaches Under SliderPLUS PRO Models
• Easily Counterbalance Your Equipment
• Adjust Slide Angle with the Turn of a Knob
• Time-lapse & Stop Motion Ready
• Compact. Lightweight. Game-changer

• 15 cm camera motion
• SteadyMOVE® Technology
• Easily Work in Crowds
• Always ready for action
• Leave it on a tripod

• Ready to use in seconds
• Overhead (bird's eye) shots
• No knobs or buttons
• Get any angle‍ in a second
• Move around freely

• Add Face Tracking to HeadPLUS v2/v2 PRO
• Single Tap Tracking with App
• Track up to 3 Faces with Live Switching
• iOS Smartphone Control Support
• Continuous Tracking In/Out of Frame

• For edelkrone Motion-Controlled Devices
• Control Devices without an App
• Wired up to 40 m, Wireless up to 25 m
• 3 x Programmable Buttons
• 3.5mm Link Connector for Wired Control

• Motorised Camera Jib Arm
• OLED Screen for Instant Feedback
• Improved Wireless Link & Longer Range
• iOS/Android Bluetooth LE App
• 50cm Camera Travel in 8 to 140 Seconds

• For Lenses with 25 to 110mm Diameter
• Standard 0.8 Mod / 32 Pitch Gearing
• Works with Most Follow Focuses

• Connects edelkron Motion Control Systems to Computer
• Dragonframe Software Integration
• Control edelkrone Mobile App on Desktop or Laptop
• Intuitive Pairing with edelkrone Ecosystem

• Load Capacity of 6.8 kg
• Easy Height Adjustment
• Raises Camera 133 mm
• Gives a Variety of Adjustable Angles
• 340 Degrees Panning Range

• Robust 63cm Portable Travel Slider
• Steady Module for Heavy Load/Slow Speed
• FlexTILT Head v3

• 100 to 240V Worldwide Power Input
• International Plug Adapters Included
• Positive Centre Polarisation

• Smooth, Automatic Pan and Tilt Head
• 9 kg Maximum Load
• Use on Tripod, SliderPLUS, DollyPLUS
• Manual or Smartphone App Control
• Record and Replay Motion

• Smooth, Automatic Pan and Tilt Head
• 4.5 kg Maximum Load
• Use on Tripod, SliderPLUS, DollyPLUS
• Manual or Smartphone App Control
• Record and Replay Motion

• For HeadONE, Pan PRO, or DollyONE
• 360° Rotation for Product Videos
• Works with Edelkrone iOS/Android App
• 1 x Matte White & 1 x Glossy Black Plate
• 1 x Shutter Release Extension Cable

• Splits a Gold Mount battery output to four separate DC jacks
• Can power up your entire edelkrone setup with a single long-lasting battery
• Can also power up your other filmmaking equipment (that meet connector and polarity requirements)
• DC to DC Cables are included (4 x 1.30 m cable, 1 x 1.5 m cable)

• Splits a V-Mount battery output to four separate DC jacks
• Can power up your entire edelkrone setup with a single long-lasting battery
• Can also power up your other filmmaking equipment (that meet connector and polarity requirements)
• DC to DC Cables are included (4 x 1.30 m cable, 1 x 1.5 m cable)

• Works with JibONE, Sliders & Dollies
• Remote + App controlled
• Silky smooth motion
• High carrying capacity (Up to 13.5kg)

• Improved wireless connection with a longer range
• Physical power button
• Improved power management (auto power off/save)
• Quieter than previous versions
• Information screen with instant feedback

Dual-Length Slider with Movable Rails, 1.3' with 15 lb Payload Tripod Mounted, 0.7' with 50 lb Payload Surface Mounted, Lockable Fold-Out Legs

• Dual-Length Slider with Movable Rails
• 0.8m with 4.5 kg Payload Tripod Mounted
• 0.4m with 18 kg Payload Surface Mounted
• Lockable Fold-Out Legs

• Dual-Length Slider with Movable Rails
• 0.48m with 11.3kg Payload Tripod Mounted
• 0.24m with 22.6kg Payload Surface Mounted
• Supports Motion Control Slide Module v3
• Up to 22.5° Incline with Slide Module v3

• Dual-Length Slider with Movable Rails
• 0.8m with 9kg Payload Tripod Mounted
• 0.4m with 18kg Payload Surface Mounted
• Supports Motion Control Slide Module v3
• Up to 22.5° Incline with Slide Module v3

Mesh Top and Pull String Closure, For Tilt Kit Brackets/Other Accessories

• For the Edelkrone JibONE
• Protects Against Dust/Scratches/Impacts
• 2 x Interior Accessory Compartments
• Adjustable Shoulder Strap
• Built-In Hand Strap

• Powers DollyPLUS and DollyPLUS PRO
• Worldwide Power Supply
• 9 VDC Output
• Interchangeable Power Plugs

• Power the HeadPLUS or HeadPLUS PRO
• 100-240V Input, 9V Output
• Barrel Connector

• Custom-Designed Soft Case
• Fits SliderPLUS Compact
• Zipper Closure
• Adjustable Shoulder Strap

• Attaches Two HeadONE Units Together
• Enables Both Pan and Tilt Motion
• 7 lb Capacity

• Fits SliderPLUS PRO Long and HeadPLUS
• Fits Slide Module and Accessories
• Zipper Closures, Multiple Pockets
• Interior Fastener Strips

• Measure Distance with Laser Precision
• Pinpoint Position of Your Subject
• Fits HeadPLUS and HeadPLUS PRO
• LINK Cable Included

• Motion Control Robot Camera Platform
• For Flat Indoor Surfaces
• Supports Most Tripods
• Supports up to 30 Pounds

• Motion Control Robot Camera Platform
• For Flat Indoor Surfaces
• Supports Most Tripods
• Supports up to 45 Pounds

• Smooth Automatic Pan and Tilt Head
• 20 lb Maximum Load
• Use on Tripod or SliderPLUS PRO
• Manual or Smartphone App Control

• Motion Control Table-Top Camera Platform.
• For Flat Indoor Surfaces.
• Supports HeadONE and HeadPLUS.
• Supports up to 6.8kgs.
• Automatically Calibrates to Centre.

• Compatible with HeadPLUS & HeadPLUS PRO
• Uses Two L-Series Batteries in Parallel

• For Select Stabilizers and Sliders
• Drives the Slide Motion
• Powers Head & Focus Modules
• Standalone Operation

• For Select Stabilizers and Sliders
• Supports Heavy Camera Loads & Low Speeds
• No Batteries or Chargers Required
• Completely Mechanical Solution
• Geared Motion Belts

• For Canon LP-E6-Type Batteries.
• Uses 2 x Batteries in Parallel.
• For Slide Module v2.
• For HeadPLUS or HeadPLUS PRO.
• For DollyPLUS or DollyPLUS PRO.

• Compact and Portable DSLR Rig
• Fold-Out Support Arm and 15mm Rods
• Shoulder Stock with Belt Groove
• 15 mm Rods Extend up to 7"(17.8 cm)
• 1/4"-20 Camera Screw

• 2.7kg load capacity
• Ready to use in seconds
• Move around freely
• No knobs or buttons

• Compatible Cold Shoe
• Swivels 360° & Tilts 180°
• Built-In 1/4"-20 Threaded Hole
• Made of Aluminium Alloy

• Durable Aluminium Articulating Arm
• 1/4"-20 Screw Mount on Each End
• 4 x Tilting/Rotating Ball Joints
• 1.8kg Maximum Load, Weighs Only 85g
• Two Large Locking Knobs

• Mount Accessories to Camera or Tripod
• Shoe Mount and 1/4"-20 Mounting Screw
• Mounts to 1/4"-20 Quick Release Plate
• 90° Notch for Multiple Positions
• Tilts 135° and Pans 360°