The D10CEA converts SDI video with embedded audio to component or composite analog video and 4 Channel balanced analog audio. The video outputs can be configured as YPbPr (Betacam or SMPTE/EBU-N10), RGB, composite or YC (S-Video). The analog audio outputs can be wired in a balanced or unbalanced configuration. The 4 audio channels can be selected from group 1-4. Audio and video output connections are available on a 25 pin "D" subminiature connector (breakout cable supplied). All video/audio configuration is done by external dipswitch selection. This versatile, low-cost, miniature monitoring solution also outputs two re-clocked loop-thru SDI outputs.
Specifications:
Inputs
SDI (SMPTE 259M) w/Embedded Audio, 1x BNC
Outputs
Video: YPbPr - SMPTE, EBU-N10, Betacam, RGB, NTSC, PAL, YC (S-Video)
Audio: 4 Channel Balanced/Unbalanced
Video/Audio Outputs on 25 Pin D Connector
2 SDI Re-Clocked Loop-Thru, 2x BNC
Frequency Response
Video, +/- .25dB to 5Mhz, Audio, +/- .5dB to 20Khz
User Controls
External Dipswitch
Video Format
Pedestal
H/V Blanking
Audio Group 1 - 4
Audio Level (adjustable via switch selection):
S/N A15212 and above: +24, +18, +15, +12 dBu
S/N below A15212: -14, 0, +2, +4 dBu
- Power: 5VDC Regulated, 4 Watts, Power Supply Required (sold separately)
- Size: 5.8" x 3.1" x 1" (147 x 79 x 25mm)
