Audio-Technica Consumer AT-VM95ML Dual Moving Magnet Cartridge
Features
- Low Distortion & High Channel Separation
- Microlinear Stylus
- Frequency Response: 20 Hz to 25 kHz
- Low-Resonance Housing
- Interchangeable with Any AT-VMN95 Styli
Description
The Audio-Technica Consumer AT-VM95ML Dual Moving Magnet Cartridge delivers high channel separation and low distortion for remarkable tonal quality. The cartridge can be mounted to a standard 1/2" mount and features integrated threaded inserts, allowing it to be mounted with just two screws (no nuts required).
The Microlinear stylus is designed to duplicate the shape of the cutting stylus used to produce the original master disk, enabling it to track portions of the groove other styli cannot reach. The result is an accurate tracking of high-frequency passages and a flat frequency response within the audible range. The unusual multi-level shape wears more evenly, allowing for extended record and stylus life. All VM95 Series share the same body, allowing the stylus to be replaced with any of the six interchangeable AT-VMN95 replacement styli. The Audio-Technica Consumer AT-VM95ML ships with mounting hardware and a non-magnetic screwdriver.
Key Features:
- VM dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylus.
- Aluminium cantilever.
- Durable low-resonance polymer housing.
- Threaded inserts in cartridge body enable the cartridge to be mounted to headshell with just two screws—no nuts or washers required.
- Compatible with any AT-VMN95 replacement stylus.
Specifications
Frequency Response | 20 Hz to 25 kHz |
Channel Separation | 23 dB (at 1 kHz) |
Tracking Force | 1.8 to 2.2 g (2.0 g Standard) |
Recommended Load Impedance | 47 kOhms |
Output | 3.5 mV (1 kHz, 5 cm/sec.) |
Channel Balance | 1.5 dB (1 kHz) |
Stylus Shape | 2.2 x 0.12 mm Microlinear |
Stylus Cantilever | Aluminium Pipe |
Mount | 0.5" / 1.27 cm |
Replacement Stylus | AT-VMN95ML |
Impedance | Coil Impedance: 3.3 kOhms (1 kHz) |
DC Resistance | 485 Ohms |
Load Capacitance | 100 to 200 pF |
Coil Inductance (Le) | 550 mH (1 kHz) |
Vertical Tracking Angle | 23° |
Dimensions | 0.7 x 0.7 x 1.1" / 17.2 x 18.9 x 28.3 mm |
Weight | 0.2 oz / 6.1 g |
In The Box
- Audio-Technica Consumer AT-VM95ML Dual Moving Magnet Cartridge
- Set of Mounting Hardware (4 x Screws and 2 x Washers)
- Non-Magnetic Screwdriver
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Audio-Technica Consumer AT-VM95ML Dual Moving Magnet Cartridge
- Manufacturer: Audio Technica
- Model: VM95ML
- SKU: VM95ML
- RM Product #: 64869
- Warranty: 1 year manufacturer warranty on all Audio Technica products. 5 year limited warranty on all Audio Technica Wired Microphones.