DPA Microphones 2011C Twin Diaphragm Cardioid Microphone (Compact)
Email me when stock arrives
- Product: #20637
- SKU: 2011C
The DPA 2011C Twin Diaphragm Cardioid Microphone features a modular capsule design and sonic character reminiscent of the DPA 4011. The 2011C features a cardioid condenser capsule well suited for capturing instruments in sound reinforcement applications. Closely position the 2011C to speaker cabinets, percussion instruments and other instruments while effectively minimizing off-axis noise while maintaining a linear tonal response.
Its modular design allows users to manually switch optional capsules and enhance its versatility and performance. The 2011C's output stage features the MMP-A output stage for faithful recreations of the original source material. The capsule's Twin Diaphragm is designed to provide a fast impulse response and large frequency bandwidth, resulting in lower inherent noise.
- All-round workhorse - blends clarity, richness and dynamics
- Twin-Diaphragm-Capsule and interference tube technologies
- Superb stage separation and level control
- Modular flexibility
||Pressure gradient with interference tube, Pre-polarized condenser
Twin Diaphragm capsule
||20Hz to 20kHz
Frequency range, ± 2 dB, at 30cm: 50 Hz to 17 kHz with 3 dB soft boost at 12 kHz
||Nominal ± 2 dB at 1kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
||A-weighted: Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 33 dB (max. 36 dB)
||Typ. 74 dB(A)
||< 1 % up to 137 dB SPL peak
|Minimum Load Impedance
|Max Input Sound Level (SPL)
||< 200 ohm
|Cable Drive Capability
||Up to 328' (100m) with DAD6001 XLR adapter
||Connector: 3-pin XLR
Output balance principle: Impedance balancing with Active Drive
|Common Mode Rejection
||> 50 dB
||Power Supply: 48V Phantom Power (+/- 4V)
Current consumption: 2.8mA
Output Voltage: > 4 V
||+V at Pin 2 for positive sound pressure
||-40 ° to 113 °F (-40 ° to 45 °C)
|Dimensions (Diam. x L)
||0.75 x 3.6" (19 x 92mm)
||2.3 oz (64g)
Australian Shipping Via DHL
DHL now offer a great express shipping service to Australia from New Zealand. We are proud to be able to offer overnight shipping to main cities on the east coast of Australia. These main centers include:
Whilst this service is extremely efficient and will be delivered overnight 99.9% of the time, it cannot be guaranteed. In the case where something were to go wrong with your delivery and it did not arrive overnight, it will most likely be delivered by the next day.
While not all major cities are eligible for overnight delivery, they still benefit from this great service. Other centers throughout Australia will have a typical delivery ETA of 2-4 days. (Excluding rural delivery address where this ETA can be extended to an additional three or more days).
If you require urgent shipping and you don’t reside in one of the cities stated above, please contact us and we can find a solution that works best for you.
Please Note: Shipping via DHL is not available to PO boxes and/ or parcelboxes etc.