DPA Microphones ST2006A Matched Stereo Pair of 2006A Omnidirectional Microphones
Customer Reviews
Email me when stock arrives
Product Details
- Product: #20809
- SKU: ST2006A
Description
The ST2006A Stereo Pair of 2006A Omnidirectional Microphones from DPA Microphones are matched within a sensitivity of +/- 1.5 dB to provide accurate sonic reproduction from both mics. The 2006As are designed to provide a linear frequency response across a large bandwidth and can be used to mic orchestras, acoustic pianos and guitars, wind instruments, and choirs. A foam-lined transportation Peli case, two windscreens, and two mic holders are included.
Specifications
Polar Pattern |
Omnidirectional |
Principle of Operation |
Pressure |
Transducer |
Pre-Polarized Condenser Twin Diaphragm Capsule |
Frequency Range |
20 Hz to 20 kHz 50 Hz to 20 kHz with a typical 3 dB Soft Boost @ 14 kHz (+/- 2 dB) |
Sensitivity |
40 mV/Pa; -28 dB re. 1 V/Pa (Nominal,+/- 2 dB @ 1 kHz) |
Equivalent Noise Level |
Typical: 16 dB(A) re. 20 µPa (maximum 18 dB A) (A-Weighted) ITU-R BS.468-4: Typ. 28 dB (maximum 30 dB) |
Signal to Noise Ratio |
Typical: 78 dB(A) (A-Weighted, reference 1 kHz @ Pa, 94 dB SPL) |
Total Harmonic Distortion (THD) |
< 1 % up to 130 dB SPL peak (@ 1 kHz) |
Dynamic Range |
Typical: 114 dB |
Maximum SPL |
141 dB (Peak Before Clipping) |
Switchable Attenuator |
0 dB to -20 dB |
Output Impedance |
< 200 Ω |
Cable Drive Capability |
328' (100 m) |
Output Balance Principle |
Impedance Balancing with Active Drive |
CMRR |
> 60 dB |
Power Supply |
48 V Phantom Power (+/- 4 V) |
Current Consumption |
2.8 mA |
Connector |
XLR-3M Pin 1: Shield Pin 2: Signal + Phase Pin 3: - Phase |
Output Voltage |
> 5 V (RMS) |
Polarity |
+V at Pin 2 for Positive Sound Pressure |
Temperature Range |
-40° to 113°F (-40° to 45°C) |
Relative Humidity |
Up to 90% |
Sensitivity Selection |
Tolerance: 1.5 dB (@ 1 kHz) |
Microphone Diameters |
0.75" (19 mm) |
Length |
6.5" (164 mm) |
Weight |
5.6 oz (160 g) |
Australian Shipping Via DHL
DHL offers a great express shipping service to Australia from New Zealand. We are proud to be able to offer express
shipping to main cities on the east coast of Australia, within the same timeframe ( If not quicker ) than local
Australian courier companies. Prior to the Covid-19 outbreak, service standards for these main centers was
overnight. However these services have been impacted greatly, and as such the overnight service has been suspended.
Overnight shipping will likely resume once things have returned to normal.
Qualifying main centers include:
- Brisbane
- Sydney
- Adelaide
Whilst this service is extremely efficient and will likely be delivered within 1-2 days 99.9% of the time, it cannot be guaranteed. In the case where something were to go wrong with your delivery and it doesn’t arrive within the specified time frame, in most cases it will be delivered by the next day.
While not all major cities are eligible for overnight delivery, they still benefit from this great service. Other centers throughout Australia will have a typical delivery ETA of 2-4 days. (Excluding rural delivery address where this ETA can be extended to an additional three or more days).
If you require urgent shipping and you don’t reside in one of the cities stated above, please contact us and we can find a solution that works best for you.
Please Note: Shipping via DHL is not available to PO boxes and/ or parcel boxes etc.