HDfury X4 HDMI to RGB/YUV/DVI & HDMI Converter with Scaler Firmware

Description

The versatile, compact HDfury X4 HDMI Convertor enables you to view your device's richer HDMI output using your HDMI/DVI-D/YUV/RGB or VGA display. The HDfury X4 upscales, downscales, transcodes, deinterlaces, and converts HDMI signals for viewing on any standard 50/60 Hz or 100/120 Hz display. Cinephiles will appreciate the HDfury X4 retaining your source's correct aspect ratio and automatically-scaling black bars. A DIP switch enables you to view 50 or 60 Hz material, and to toggle between PAL and NTSC. The single HDMI 1.4–input HDfury X4's features include 3D, deep colour, and graphics-mode support.

The HDfury X4 can output both digital and analogue video/audio simultaneously, acting as a splitter. Colour-depth upscaling, and third-party output accessories are supported by the HDfury X4. Audio features include HDMI audio pass-through, stereo output, 2-channel PCM, and DTS-HD Master Audio, 5.1 and 7.1 Dolby support. Customised-EDID banks can be based on your sink (display) parameters. Use the HDfury X4's USB port for Scaler firmware upgrades and to draw power from a USB device.

Features

• Display HDMI content at any HDMI/DVI-D/RGB/VGA/YUV TV, monitor, or projector's maximum resolution
• Capable of simultaneous digital and analogue video/audio output
• Multiply lower-resolution material up to 1080p/96
• Scales, deinterlaces, converts, and transcodes signals
• Toggle between 50/60 Hz or PAL/NTSC
• 1 x HDMI 1.4 input with 3D and Deep Colour support
• HDMI/DVI-D and/or component (YPbPr/YCbCr) and VGA (RGBHV) video output
• Three aspect ratio modes (Full Width, Full Screen, Original)
• 7.1 Dolby True HD and DTS Master Audio support
• Analogue and digital optical stereo audio output via a 3.5mm combo jack
• Customisable EDID banks (2 per channel)
• Performs colour depth upscaling in all modes (on/off user-selectable)
• Sync-polarity inverter included
• Automatic SD/HD colour-space selection
• Accepts third-party accessories on output
• Improved output cable driver for long cable runs (40-50')
• Upgrade software or power via USB