| Supported OS |
Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64) |
| Linux (V4L2 kernel driver source code under NDA, supports x86, x64 & arm architecture) |
|
| OS X 10.9–10.11 |
|
| macOS 10.12 |
|
| Supported APIs |
Windows |
| - DirectShow |
|
| - DirectKS |
|
| - Wave API/DirectSound/WASAPI |
|
| Linux |
|
| - V4L2 |
|
| - ALSA |
|
| Supported Software |
VLC |
| VirtualDub |
|
| OBS |
|
| XSplit |
|
| vMix |
|
| VidBlaster |
|
| Wirecast |
|
| Microsoft Media Encoder |
|
| Adobe Flash Media Encoder |
|
| Any other DirectShow/V4L2 encoding/streaming software |
|
| Input Interfaces |
|
| DVI |
|
| - DVI-D 1.0(Single or dual link) |
|
| - HDMI 1.4 |
|
| Host Interfaces |
PCIe Gen2 x4 |
| Input Features |
Support for input video resolutions up to 4096×2160 pixels |
| HDMI Specific Features |
Dual 165MHz HDMI receiver |
| Adaptive HDMI equalizer |
|
| Support for customized EDID |
|
| Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames |
|
| Full colorimetry support |
|
| Support for single link DVI or HDMI signals at pixel rate no more than 165MHz |
|
| Support for dual link DVI signals at pixel rate no more than 330MHz |
|
| Support for extraction of audio formation information & channel status data |
|
| Support for extraction of video timing information |
|
| Support for extraction of 3D format information |
|
| Support for extraction of Sony/Canon DSLR time code |
|
| Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode |
|
| Video Capture Formats |
Support for capture image resolutions up to 4096×2160 pixels |
| Support for capture frame rates up to 144fps. (Actual capture frame rate can be limited by PCIe bandwidth & image resolution) |
|
| Support for 4:2:0 8-bit capture formats: NV12, I420, YV12 |
|
| Support for 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY |
|
| Support for 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32 |
|
| Support for 4:4:4 10-bit capture formats: V410, Y410 |
|
| More capture formats are supported via Pro Capture SDK for DirectKS |
|
| Video Processing Features |
Two video processing pipelines with ~360Mpixels/s processing bandwidth for each one |
| Full 10-bit video processing |
|
| Video cropping |
|
| Video scaling |
|
| Video de-interlacing |
|
| - Weave |
|
| - Blend top & bottom field |
|
| - Top field only |
|
| - Bottom field only |
|
| Video aspect ratio conversion |
|
| - Auto or manual selection of input aspect ratio |
|
| - Auto or manual selection of capture aspect ratio |
|
| - Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox) |
|
| Video color format conversion |
|
| - Auto or manual selection of input color format & quantization range |
|
| - Auto or manual selection of capture color format, quantization range & saturation range |
|
| - Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats |
|
| - Support for Limited or Full quantization range |
|
| - Support for Limited, Full & ‘Extended gamut’ saturation range |
|
| Video frame rate conversion |
|
| Video OSD composition |
|
| - Support for PNG OSD image (up to 4096×2160) |
|
| - Support for dynamic loading of RGBA OSD image via SDK |
|
| Multiple Cards per System |
Support for multiple cards plugged to one system |
| On-board rotary switch to set card number, with 16 positions from 0 to F |
|
| System hardware device tree will display “01: Pro Capture DVI 4K” when rotary switch is set to 1, and so on |
|
| The video and audio device names displayed in your software will include the card number (set by the rotary switch) |
|
| Multiple Capture Streams |
Unlimited capture streams for any one input channel |
| Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream |
|
| Ultra Low Latency Support |
Latency of 64 video lines |
| Partial notification mode in SDK |
|
| Timestamp &A/V Synchronization |
Hardware based 100ns high resolution clock |
| Audio frames (192 audio samples) & video frames are stamped with hardware clock |
|
| Hardware clock can be synchronized across cards (via SDK) |
|
| Video Capture SG-DMA |
~1200MB/s per channel DMA bandwidth in PCIe 2.x system |
| ~800MB/s per channel DMA bandwidth in PCIe 1.x system |
|
| Support for auto detection of Intel tiled GPU surface |
|
| Support for DirectGMA for AMD video adapter chipsets |
|
| Support for GPUDirect for Nvidia video adapter chipsets |
|
| SDK |
Pro Capture SDK for DirectShow for easy integration (Windows) |
| Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows) |
|
| Windows Driver Tweaks |
All options can be controled by three levels of registry key: global level, product level and device level |
| Video,Audio, Crossbar filter names can be customized via registry keys |
|
| Firmware Upgrade |
Multiple cards in one system can be upgraded simultaneously |
| Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed) |
|
| LED Indicator |
Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed. |
| Form Factor |
Low profile PCIe x4 Add-on Card |
| 92.76mm x 68.88mm (without PCI bracket) |
|
| Power Consumption |
Max current at 12V: ~ 0.4 A |
| Max current at 3.3V: ~ 0.86 A |
|
| Max power consumption: ~ 7.28 W |
|
| Working Environment |
Operating temperature: 0 to 40 deg C |
| Storage temperature: –20 to 70 deg C |
|
| Relative Humidity: 5% to 90% non-condensing |
|
