Speakers & Headphones

• Mixing, Video, Recording, Podcasting
• Over-Ear, Sound-Isolating Design
• Closed-Back Design
• 40mm Custom-Matched Dynamic Drivers
• 5 Hz to 35 kHz Frequency Response

• 130 mm Composite Sandwich Woofer Cone
• 25 mm Titanium Dome Tweeter
• 160 W Peak Analogue AB Amplifier
• Elliptical Modelled Dispersion Waveguide
• Wide Horizontal Dispersion

• For Studio Recording, Mixing, Mastering
• Acoustic Tuning Adjustment Controls
• 1" Silk Dome Tweeter for Treble
• 4.5" Kevlar Woofer Cone for Bass
• 25W Class AB Amplification

• Compact Speakers for Content Creation.
• For Gaming, Monitoring, and More.
• Bluetooth 5.0 Streaming.
• 3.5" Woven Composite Woofer.
• 1" Silk-Dome Tweeter.

• 2x 3/4" Tweeters
• 2x 3" Woofers
• Bluetooth Capability
• 2x RCA Inputs
• 1x 3.5mm Input

• 120W Total Output
• 203 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• Compact Speakers for Content Creation
• For Gaming, Monitoring, and More
• Bluetooth 5.0 Streaming
• 4.5" Woven Composite Woofer
• 1" Silk-Dome Tweeter

• 70W Total Output
• 127 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• DSP engine included
• Higher SPL
• Better resolution
• Linear frequency and phase response
• Even deeper bass

• 2-way bass-reflex bi-amplified nearfield studio monitor
• 5" cone woofer and 1" dome tweeter
• 54Hz - 30kHz frequency response
• 45W LF plus 25W HF bi-amp system for total 70W power amplification
• ROOM CONTROL and HIGH TRIM response controls
• XLR and TRS phone jack inputs, balanced or unbalanced

• For Music Production and Video Editing
• 0.75" Dome Tweeter and 3.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• 95W Total Output
• 165 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• For Music Production and Video Editing
• 1" Dome Tweeter and 4.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• Compact Speakers for Content Creation
• For Gaming, Monitoring, and More
• 3.5" Woven Composite Woofer
• 1" Silk-Dome Tweeter
• Low- and High-Frequency Adjustment
• Class A/B Amplifier

• 5" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 50 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• Improve the sound of your existing amps and speakers.
• Ideal for heavy guitar and bass cabinets and PA speakers.
• Decouples your speakers from supporting surfaces.
• Helps to minimise vibrational resonance into coupled surfaces and mic stands.

• 95W Total Output.
• 165 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• Monitor Controller for Stereo Speakers
• Stream Bluetooth to Wired Speakers
• Add Subwoofer to Stereo Setup
• Prominent Volume Dial
• Headphone Output for Private Monitoring

• For Music Production and Video Editing
• 1" Dome Tweeter and 4.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 144 lbs (65kg)

• DSP engine included
• Higher SPL
• Better resolution
• Linear frequency and phase response
• Even deeper bass

• For Music Production and Video Editing
• 0.75" Dome Tweeter and 3.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• 120W Total Output.
• 203 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• Custom Designed for Yamaha VXS3SB and VXS3SW
• Designed to Flush Mount Subwoofer into Ceiling

• Ceiling mount adapter for Yamaha VXS1ML
• White finish

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 32 lbs (15kg)

Exclusively for Use with the Sonos Beam, Works with Mounts for 37 to 70" Displays, Interfaces with Your Display Mount, Broad VESA Compatibility

Speaker Decoupler, 10° Up-Fire Profile, For Speakers up to 44 lbs (20kg)

• Adapter for Speaker-Stand Shafts
• Fits 1-3/8" Shafts
• Works with 1-1/2" Internal Brackets
• Steel Construction
• Black Powder-Coat Finish

• 4" Woofer, ¾" Tweeter
• 50W Bass Amplifier
• 50W Treble Amplifier
• Auto-Switching to Standby Saves Power
• Class-D Amplification

• Solid and stable wall mount
• Adjustable boom
• 210 to 340 mm clamping range
• 200mm in width

• 74 to 20,000 Hz Frequency Response
• 3/4" Metal Dome Tweeter for Treble
• 76.2 mm Woofer for Bass
• Bass Tilt Control
• Aluminium Minimum Diffraction Enclosure

• 7" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• Bi-amplified design with 150 watts (80 LF, 70 HF) for powerful, accurate sound
• 8” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
• 25” natural silk dome tweeter delivers superb transient details
• Computer-optimized tweeter waveguide for precise imaging
• Acoustic Space Control to fine-tune low-end response to your room

• 8" Woofer
• 4" Mid-Woofer
• 1" Soft Dome Tweeter
• Tri-Amped: 50W / 50W / 80W Class-D
• 24-Bit / 96 kHz Signal Path and DSP
• Frequency Response: 40 Hz to 21 kHz

• 8" Woofer
• 4" Mid-Woofer
• 1" Soft Dome Tweeter
• Tri-Amped: 50W / 50W / 80W Class-D
• 24-Bit / 96 kHz Signal Path and DSP
• Frequency Response: 40 Hz to 21 kHz

• Unique curved shape
• Enables proper sound dispersion
• Can minimize room reflections
• Swivel joint offers flexibility