Speakers & Headphones

• For Music Production and Video Editing
• 0.75" Dome Tweeter and 3.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• For Music Production and Video Editing
• 0.75" Dome Tweeter and 3.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• For Music Production and Video Editing
• 1" Dome Tweeter and 4.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• For Music Production and Video Editing
• 1" Dome Tweeter and 4.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

Exclusively for Use with the Sonos Beam, Works with Mounts for 37 to 70" Displays, Interfaces with Your Display Mount, Broad VESA Compatibility

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 50 lbs (22kg)

Speaker Decoupler, 5° Down-Fire Profile, For Speakers up to 50 lbs (22kg)

Speaker Decoupler, 10° Up-Fire Profile, For Speakers up to 44 lbs (20kg)

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 44 lbs (20kg)

Speaker Decoupler, 10° Up-Fire Profile, For Speakers up to 32 lbs (15kg)

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 32 lbs (15kg)

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 144 lbs (65kg)

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 88 lbs (40kg)

• Sized for iLoud Micro Monitors
• Zippered Pouch for Accessories
• Adjustable Shoulder Straps

• 120W Total Output.
• 203 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• 95W Total Output.
• 165 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• Bi-amplified design with 150 watts (80 LF, 70 HF) for powerful, accurate sound
• 8” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
• 25” natural silk dome tweeter delivers superb transient details
• Computer-optimized tweeter waveguide for precise imaging
• Acoustic Space Control to fine-tune low-end response to your room

• Improve the sound of your existing amps and speakers.
• Ideal for heavy guitar and bass cabinets and PA speakers.
• Decouples your speakers from supporting surfaces.
• Helps to minimise vibrational resonance into coupled surfaces and mic stands.

• Mixing, Video, Recording, Podcasting
• Over-Ear, Sound-Isolating Design
• Closed-Back Design
• 40mm Custom-Matched Dynamic Drivers
• 5 Hz to 35 kHz Frequency Response

• Ultra low noise and transparent circuit design.
• Source switches for both Main & Cue can be active in any combination. 5 Inputs in Total - 1x Digital AES/SPDIF Neutrik XLR/JACK COMBI & 2 balanced analogue Neutrik XLR/JACK COMBI and 1 stereo RCA Analogue on the Rear Panel & 1 3.5mm Front Panel Aux.
• 3x Speakers Plus a Mono Sub can be switched individually & simultaneously or give A/B comparisons. Each has level trims to provide precise channel matching.

• Ultra-low noise and transparent circuit design
• Linear power supply with low hum toroidal transformer and internal voltage selector switch
• Three balanced stereo speaker outputs, plus a dedicated mono speaker/sub-woofer output
• All outputs with individual L/R trims under unit to provide complete control over level matching
• Timed relay protection on all speaker outputs to prevent power up/down thumps.

• Compact 8-channel monitor controller
• Ultra-low noise and transparent circuit design
• Covers 5.1, 7.1, quadraphonic, DTS, Dolby Digital EX, THX Surround EX, DTS-HD, Dolby Atmos, and more
• Large, ultra-precise volume knob supplies smooth volume changes
• Stereo Mix switch enables you to check your surround mix in stereo

• Ultra-low noise and transparent circuit design
• Source switches may be active in any combination
• 4 inputs: SPDIF (192kHz/24Bit), 2 analog balanced 1/4" stereo, 3.5mm front-panel Aux jack
• 3 pairs of speakers plus a mono sub may be switched individually and simultaneously or provide A/B comparisons

• 70W Total Output
• 127 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• Compact Speakers for Content Creation
• For Gaming, Monitoring, and More
• 3.5" Woven Composite Woofer
• 1" Silk-Dome Tweeter
• Low- and High-Frequency Adjustment
• Class A/B Amplifier

• All-in-One Acoustic Room Correction
• Works with Any Interface and Computer
• Latency-Free, Set-and-Forget Correction
• Improves Frequency and Stereo Balance
• Avoids Drastic AEQ Changes to Room
• Work Faster and Create Better Mixes

• Solid and stable wall mount
• Adjustable boom
• 210 to 340 mm clamping range
• 200mm in width

• Unique curved shape
• Enables proper sound dispersion
• Can minimize room reflections
• Swivel joint offers flexibility

• 0⁰-30⁰ vertical and +/- 45⁰ horizontal adjustment
• Maximum reliability and flexibility
• Made in Germany

• 8" Woofers (80W)
• 1" Soft-Dome Tweeters (50W)
• Biamped Class-D Amplifier
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 8" Woofer (80W)
• 1" Soft-Dome Tweeter (50W)
• Biamped Class-D Amplifier
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 7" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 7" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 5" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 50 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 5" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 50 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 8" Woofer
• 4" Mid-Woofer
• 1" Soft Dome Tweeter
• Tri-Amped: 50W / 50W / 80W Class-D
• 24-Bit / 96 kHz Signal Path and DSP
• Frequency Response: 40 Hz to 21 kHz

• 8" Woofer
• 4" Mid-Woofer
• 1" Soft Dome Tweeter
• Tri-Amped: 50W / 50W / 80W Class-D
• 24-Bit / 96 kHz Signal Path and DSP
• Frequency Response: 40 Hz to 21 kHz

• 4 x 9" Woofers
• 2 x 500W Class D Amplifiers
• XLR Analog and AES Digital Connections
• Uses CORE DSP System
• Use Up to 3 Subs at Once
• 13.5 Hz to 200 Hz Frequency Range