Studio Monitors

• 5" Woven Composite Woofer.
• 1" Ultra-Low-Mass, Silk-Dome HF Driver.
• EBM Waveguide Designed by Hugh Sarvis.
• Large Ported Enclosure for Deeper Bass.
• 80W Class AB Biamplification.

• 130 mm Composite Sandwich Woofer Cone
• 25 mm Titanium Dome Tweeter
• 160 W Peak Analogue AB Amplifier
• Elliptical Modelled Dispersion Waveguide
• Wide Horizontal Dispersion

• For Studio Recording, Mixing, Mastering
• Acoustic Tuning Adjustment Controls
• 1" Silk Dome Tweeter for Treble
• 4.5" Kevlar Woofer Cone for Bass
• 25W Class AB Amplification

• Compact Speakers for Content Creation.
• For Gaming, Monitoring, and More.
• Bluetooth 5.0 Streaming.
• 3.5" Woven Composite Woofer.
• 1" Silk-Dome Tweeter.

• 2x 3/4" Tweeters
• 2x 3" Woofers
• Bluetooth Capability
• 2x RCA Inputs
• 1x 3.5mm Input

• 120W Total Output
• 203 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• Coherent Time Response Across the Audio Spectrum
• High Performance Vented Design
• Built-in ARC Room Calibration
• X-MONITOR Technology
• Handcrafted in Italy
• X-MONITOR macOS and Windows Control Software

• Coherent Time Response Across the Audio Spectrum
• High Performance Vented Design
• Built-in ARC Room Calibration
• X-MONITOR Technology
• Handcrafted in Italy
• X-MONITOR macOS and Windows Control Software

• Compact Speakers for Content Creation
• For Gaming, Monitoring, and More
• Bluetooth 5.0 Streaming
• 4.5" Woven Composite Woofer
• 1" Silk-Dome Tweeter

• 70W Total Output
• 127 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• DSP engine included
• Higher SPL
• Better resolution
• Linear frequency and phase response
• Even deeper bass

• 2-way bass-reflex bi-amplified nearfield studio monitor
• 5" cone woofer and 1" dome tweeter
• 54Hz - 30kHz frequency response
• 45W LF plus 25W HF bi-amp system for total 70W power amplification
• ROOM CONTROL and HIGH TRIM response controls
• XLR and TRS phone jack inputs, balanced or unbalanced

• 95W Total Output
• 165 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• For Music Production and Video Editing
• 0.75" Dome Tweeter and 3.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• For Music Production and Video Editing
• 1" Dome Tweeter and 4.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• 8" Woofer
• 4" Mid-Woofer
• 1" Soft Dome Tweeter
• Tri-Amped: 50W / 50W / 80W Class-D
• 24-Bit / 96 kHz Signal Path and DSP
• Frequency Response: 40 Hz to 21 kHz

• 8" Woofer
• 4" Mid-Woofer
• 1" Soft Dome Tweeter
• Tri-Amped: 50W / 50W / 80W Class-D
• 24-Bit / 96 kHz Signal Path and DSP
• Frequency Response: 40 Hz to 21 kHz

• Compact, Bookshelf Design
• Great for Accurate Sound in Small Places
• Stereo Bluetooth 5.0 Streaming
• 5.25" Woven Composite Woofer
• 1" Silk-Dome Tweeter
• Low- and High-Frequency Adjustment

• 8" Woofer and 1.25" Silk-Dome Tweeter
• 35 Hz to 20 kHz Frequency Response
• 105 dB SPL
• EBM Waveguide for a Wide Sweet Spot
• Control Level, HPF, MF Trim, and HF Trim
• Acoustic Space Filter

• 5" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 50 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• Multi-Point Bluetooth Technology
• Automatic Re-Pairing
• Pairing Button
• Connects via 3.5mm or RCA Connection
• Wireless Range up to 15 m

• Unique curved shape
• Enables proper sound dispersion
• Can minimize room reflections
• Swivel joint offers flexibility

• 95W Total Output.
• 165 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• Loaded with the same transparent audio circuitry as Drawmer's high-end offerings
• Streamlined design is tailor-made for smaller project studios
• Accommodates two sets of studio monitors and a subwoofer
• Built-in headphone amplifier with dedicated level control
• 3 inputs including 2 TRS jacks and a 1/8" auxiliary jack

• For Music Production and Video Editing
• 1" Dome Tweeter and 4.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• 8" Woofer and 1.25" Silk-Dome Tweeter
• 35 Hz to 20 kHz Frequency Response
• 105 dB SPL
• Single Point-Source Coaxial Design
• Wide Sweet Spot, Precise Phase Alignment
• Control Level, HPF, MF Trim, and HF Trim

• 6.5" Woofer and 1.25" Silk-Dome Tweeter
• 35 Hz to 20 kHz Frequency Response
• 103 dB SPL
• Single Point-Source Coaxial Design
• Wide Sweet Spot, Precise Phase Alignment
• Control Level, HPF, MF Trim, and HF Trim

• 5.25" Woofer and 1" Silk-Dome Tweeter
• 48 Hz to 20 kHz Frequency Response
• 102 dB SPL
• EBM Waveguide for a Wide Sweet Spot
• Control Level, HPF, MF Trim, and HF Trim
• Acoustic Space Filter

• 0⁰-30⁰ vertical and +/- 45⁰ horizontal adjustment
• Maximum reliability and flexibility
• Made in Germany

• 10" Woofers
• ESOTEC Soft Dome Tweeter
• Phase-Aligned Crossover
• MOSFET Amplifiers
• Protection Circuitry

• 5" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 50 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 4 x 9" Woofers
• 2 x 500W Class D Amplifiers
• XLR Analog and AES Digital Connections
• Uses CORE DSP System
• Use Up to 3 Subs at Once
• 13.5 Hz to 200 Hz Frequency Range

• 1" Esotar Pro Tweeter
• 7" MSP Glass-Fibre Woofer
• Biamped: 150/500 Class-D
• 24-Bit / 192 kHz Signal Path and DSP
• Frequency Response: 38 Hz to 31 kHz
• Analog and Digital Inputs with Wordclock

• 1" Esotar Pro Tweeter
• 5" MSP Mid-Woofer
• 9" Glass-Fiber Woofer
• Triamped: 150 / 500 / 500 Class-D
• 24-Bit / 192 kHz Signal Path and DSP
• Frequency Response: 36 Hz to 31 kHz

• 8" Woofer
• 4" Mid-Woofer
• 1" Soft Dome Tweeter
• Tri-Amped: 50W / 50W / 80W Class-D
• 24-Bit / 96 kHz Signal Path and DSP
• Frequency Response: 40 Hz to 21 kHz

• 7" Woofer
• 4" Mid-Woofer
• 1" Tweeter
• Tri-Amped: 150W / 500W / 500W Class-D
• 24-Bit / 192 kHz Signal Path and DSP
• 44 Hz to 27 kHz (±3 dB)

• 7" Woofer
• 4" Mid-Woofer
• 1" Tweeter
• Tri-Amped: 150W / 500W / 500W Class-D
• 24-Bit / 192 kHz Signal Path and DSP
• 44 Hz to 27 kHz (±3 dB)

• 7" Woofer
• 1.1" Soft Dome Tweeter
• IsoAcoustics ISO-L8R155 Speaker Stand
• Bi-Amped Design
• HF Waveguide
• HF, MF, LF Analogue Room Filters

• 10" Woofer
• ESOTEC Soft Dome Tweeter
• Phase-Aligned Crossover
• MOSFET Amplifiers
• Protection Circuitry

• 10" Woofer
• ESOTEC Soft Dome Tweeter
• Phase-Aligned Crossover
• MOSFET Amplifiers
• Protection Circuitry

• 120W Total Output.
• 203 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

Exclusively for Use with the Sonos Beam, Works with Mounts for 37 to 70" Displays, Interfaces with Your Display Mount, Broad VESA Compatibility

• Solid and stable wall mount
• Adjustable boom
• 210 to 340 mm clamping range
• 200mm in width

• Custom Designed for Yamaha VXS3SB and VXS3SW
• Designed to Flush Mount Subwoofer into Ceiling

• Ceiling mount adapter for Yamaha VXS1ML
• White finish