Neutrik's 3-Pole XLR Female to Mono 1/4" Male Adapter (Tip, Sleeve Contact) is a versatile, pre-wired, ready-to-use adapter that reliably interlocks various connector systems.
Key Features
- Versatile, pre-wired, and ready-to-use adapter to reliably interlock various connector systems
- Professional look and compact space saving design, based on the X series (XLR worldwide accepted standard)
- Rugged die-cast shell for best reliability
Specifications
| Locking Device |
Latch lock |
| Wiring |
Wired according to IEC 268-12: Pin 1 and 3: connected to ground Pin 2: signal |
| Contact Resistance |
≤ 3 mΩ (inner) (XLR) |
| Comment |
≤ 6 |
| Dielectric Strength |
XLR: 1.5 kV dc Mono 1/4": > 1 kV dc |
| Insulation Resistance |
> 2 GΩ |
| Contact Plating |
2 µm Ag over 2 µm Ni |
| Contacts |
Brass (CuZn39Pb3) (plug) |
| Insert |
Polyamide (PA 6.6 30 % GR) |
| Shell |
Zinc die-cast (ZnAl4Cu1) |
| Shell Plating |
Gal Cu/Ni |
| Temperature |
-4-149°F (-20-65°C) |
| Connector 1 |
3-Pin XLR Female |
| Connector 2 |
Mono 1/4" Male |
