The Neutrik NBNB75ILP9 BNC Cable Jack for Panel Mount (Isolated) features a true 75 Ω design for serial and digital (HD) signals. The machined brass connector body provides a highly rugged and non-abrasive connection for long-term use.
Key Features
- Gold-plated center contact
- True 75 Ω design meets stringent HD requirements
- Isolated panel mount (solves potential grounding problems and prevents common-mode influence with other connections conducted over the same panel ground potential)
- Suitable Cables: Belden 1505A, Belden 8241F, Canare L4CFB, CommScope 5565, Draka 0.8/3.7 AF, Draka 755-801 (803, 804), Gepco VPM2000, Suhner S04263, Sommer 600-0451
Specifications
| Connection Type |
BNC 75 Ω |
| Gender |
Male |
| Contact Resistance |
≤3 m Ω inner (inner) |
| Comment |
≤2 |
| Dielectric Strength |
1.5 KVDC |
| Impedance |
75 Ω |
| Insulation Resistance |
>5 G Ω |
| Rated Voltage |
500 V |
| VSWR |
≤1.050 / >32 dB up to 1 GHz ≤1.065 / >30 dB up to 2 GHz ≤1.1 / >26 d |
| Cable O.D. |
0.15 to 0.30" (4 to 7.7 mm) |
| Cable Retention |
>30 N (center) |
| Crimp Mass |
6.47 Hex crimp (shield) according to IEC 60803 (die designation E) |
| Crimp Size |
1.6 Square crimp (pin) according to IEC 60803 (die designation 2) |
| Insertion Force |
<25 N |
| Lifetime |
>1,000 mating cycles |
| Locking Device |
Bayonet |
| Mounting Direction |
Rear |
| Chassis Shape |
0.5" (12.7 mm) |
| Cable |
Anchoring: Jacket crimping |
| Contacts |
Brass (CuZn35Pb2), 0.2 µm AuCo (Center contact) |
| Insert |
PTFE |
| Shell |
Brass (CuZn39Pb3) |
| Shell Plating |
Optalloy |
| Standard Compliance |
IEC 6016908, MIL 348A |
| Temperature Range |
-22 to 185°F (-30 to 85°C) |
| Contact |
Crimpability: Complies with IEC 60803 and IEC 60352-2 |
| Dimensions (Ø x L) |
0.630 x 1.32" (16 x 33.6 mm) |
