The 3-Pole Female XLR Cable Connector from Neutrik is easy to assemble and requires no screws. The zinc die cast shell provides durability while the rubber gland protects against bending stress.
Key Features
- Rugged zinc die cast shell, long lasting and durable
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
- Colored rings and boots available for coding and marking
- UL recognized components
Specifications
| Connection Type |
XLR |
| Capacitance |
≤4 pF between contacts |
| Contact Resistance |
≤ 3 mΩ (inner) |
| Dielectric Strength |
1.5 kVdc |
| Insulation Resistance |
> 2 GΩ (initial) |
| Rated Current Per Contact |
16 A |
| Rated Voltage |
50 V |
| Cable O.D. |
3.5 to 8.0 mm |
| Insertion Force |
≤ 20 N |
| Withdrawl Force |
≤ 20 N |
| Lifetime |
> 1000 mating cycles |
| Maximum Wire Size |
14 AWG (2.5 mm 2 ) |
| Minimum Wire Size |
2.5 mm 2 |
| Wiring |
Solder contacts |
| Locking Device |
Latch lock |
| Material |
Boot: Polyurethane Bushing: Polyamide (PA 6 15% GR) Contact Plating: 2 µm Ag over 2 µm Ni Contacts: Bronze (CuSn8) Insert: Polyamide (PA 6.6 30 % GR) Locking Element: St3K32 (latch) / Ck 67 (spring) Shell: Zinc diecast (ZnAl4Cu1) Shell Plating: Black chromium Strain Relief: Polyacetal (POM) |
| Compliance |
Approvals: UL Flammability: UL 94 HB Standard Compliance: IEC 61076-2-103 Protection Class: IP 40 Solderability: complies with IEC 68-2-20 |
| Temperature Range |
-22 to 176 °F (-30 to 80 °C) |
| Dimensions (Ø x L) |
0.62 x 2.83" (15.8 x 72.0 mm) |
