The Neutrik NC4FXX-B 4-Pole Female Cable Connector offers several new features which make it more reliable and easier to assemble. It also improves contact integrity and provides cable strain relief.
Key Features
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity
- Improved chuck-type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Colored rings and boots available for coding or identification
- Sleek and ergonomic design - valuable and handy
- Rugged zinc diecast shell, long lasting and dependable
- Internal thread on shell is well-protected against any damage
- Branded with unique hologram
Specifications
| Connection Type |
XLR |
| Gender |
Female |
| Capacitance |
≤ 7 pF |
| Contact Resistance |
≤3 mΩ (inner) |
| Dielectric Strength |
1,5 kVdc |
| Insulation Resistance |
>2GΩ (initial) |
| Rated Current Per Contact |
10 A |
| Rated Voltage |
50 V |
| Cable O.D. |
3.5 to 8 mm |
| Insertion Force |
≤20 N |
| Withdrawal Force |
≤20 N |
| Lifetime |
>1000 mating cycles |
| Wire Size |
Maximum 1.5 mm² Maximum 16 AWG |
| Wiring |
Solder contacts |
| Locking Device |
Latch lock |
| Boot |
Polyurethan |
| Contact Plating |
2 µm Ag over 2 µm Ni |
| Locking Mechanism |
Zinc diecast (ZnAl4Cu1) / Ck 67 (spring) |
| Contacts |
Brass (CuZn39Pb3) |
| Insert |
Polyamide (PA 6.6 30% GR) |
| Shell |
Zinc diecast (ZnAl4Cu1) |
| Shell Plating |
Nickel |
| Strain Relief |
Polyacetal (POM) |
| Flammability |
UL 94 HB |
| Standard Compliance |
IEC 61076-2-103 |
| Protection Class |
IP40 |
| Solderability |
Complies with IEC 68-2-20 |
| Temperature Range |
-22 to 176°F (-30 to 80°C) |
