| Performance Specifications |
|
| Model |
HDS1022M-N |
| Bandwidth |
20MHz |
| Sample Rate (real time ) |
100MS/s |
| Horizontal Scale (s/div) |
5ns/div～100s/div, step by 1～2.5～5 |
| Rise Time (at input, typical) |
≤ 17.5ns |
| Display |
3.7 inch colour display with TFT panel (640 × 480 pixels, 65535 colours) |
| Channel |
dual |
| Input Impedance |
1MΩ ± 2%, in parallel with 20pF ± 5pF |
| Record Length |
max 6000 points on each channel |
| Interpolation |
sin (x) / x |
| Probe Attenuation Factor |
1X，10X，100X，1000X |
| Input Coupling |
DC, AC, and GND |
| DC Accuracy (average) |
average >16: ±(5% reading + 0.05div) for △V |
| Vertical Sensitivity |
5mV/div～5V/div (at input) |
| Vertical Resolution (A/D) |
8 bits (2 channels simultaneously) |
| Max Input Voltage |
400V (PK - PK) (DC + AC, PK - PK, 1MΩ input impedance, probe attenuation 10 : 1), CAT II |
| Trigger Type |
Edge, Video, Alternate |
| Trigger Mode |
Auto, Normal, Single |
| Trigger Level |
±6 divisions from screen centre |
| Acquisition Mode |
Sample, Peak Detect, and Average |
| DC Gain Accuracy |
±3% |
| Automatic Measurement |
Vpp, Vavg, Vamp, Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Overshoot, Preshoot, Rise Time, Fall Time, Delay A→B↑, Delay A→B↓, +Width, -Width, +Duty, -Duty |
| Waveform Math |
＋, －, ×, ÷, FFT |
| Waveform Storage |
4 waveforms |
| Lissajous Figure Bandwidth |
full bandwidth |
| Lissajous Figure Phase Difference |
±3 degrees |
| Communication Interface |
USB |
| Power Supply |
100V-240V AC, 50/60Hz |
| Li-ion Battery |
7.4V, 6 hours operation |
| Dimensions (W × H × D) |
180 × 115 × 40 mm |
| Weight (without package) |
645 g |
| Multimeter Specifications |
|
| Full Scale Reading |
3(3/4) digit (max 4000-count) |
| Diode |
0V-1.5V |
| Input Impedance |
10 MΩ |
| On / Off measurement |
< 50 (± 30) beeping |
| Voltage |
VDC
400mV, 4V, 40V, 400V, 1000V: ±(1% ± 1 digit)
Max input: DC 1000V
VAC
4V, 40V, 400V: ±(1% ± 3 digits), 750V: ±(2% ± 3 digits)
Frequency: 40Hz - 400Hz; max input: AC 400V (virtual value) |
| Current |
DC
40mA, 400mA: ±(1.5% ± 1 digit), 10A: ±(3% ± 3 digits)
AC
40mA: ±(1.5% ± 3 digits), 400mA: ±(2% ± 1 digit), 20A: ±(5% ± 3 digits) |
| Impedance |
400Ω: ±(1% ± 3 digits), 40ΚΩ - 4ΜΩ: ±(1% ± 1 digit), 40MΩ: ±(1.5% ± 3 digits) |
| Capacitance |
51.2nF - 100uF: ±(3% ± 3 digits) |
