PowerShield Commander Tower 1100VA
- Product: #55931
- SKU: PSCM1100
The PowerShield Commander is a sophisticated pure sine wave, line interactive UPS. On top of featuring Automatic Voltage Regulation (AVR), it provides a Pure Sine Wave output while in backup mode. This UPS is a cost-effective solution for protecting applications such as networking, telecom, security and motors.
- Pure Sine Wave Output
- Output Power Factor 0.9
- Free, programmable Power Management
- Ultra Modern, Informative LCD – Shows Battery Time Remaining
- ECO Mode
- Smart AVR
- Emergency Power Off Function
- Multiple Communication Available with faster SNMP Card
|Topology||Line Interactive, Pure Sine Wave|
|Nominal Voltage||240V AC|
|Acceptable Voltage Range||162V~290V AC|
|Frequency||50/60Hz ±5Hz (auto sensing)|
|Voltage Regulation (AC Mode)||240V AC (Selectable 208/220/230V AC) ± 10% AVR|
|Voltage Regulation (Batt. Mode)||± 1.5% (before battery alarm)|
|Frequency Range (Batt. Mode)||50Hz or 60Hz ±1Hz|
|Current Crest Ratio||3.1|
|Total Harmonic Distortion||2% max @ 100% linear load, 5% max @ 100% non-linear load (before low battery alarm)|
|Transfer Time||6ms (Typical), 10ms max.|
|Waveform (Batt. Mode)||Pure Sine Wave|
|AC Mode||98% (Advanced ECO design)|
|Standard Model||Battery Type & Number: 12V/9AH (x2)
Recharge Time: 4 hours recover to 90% capacity
|Full Protection||Overload, thermal, short circuit, discharge and overcharge protection|
|Relative Humidity||0%~90% (RH non-condensing)|
|COMMUNICATIONS & MANAGEMENT|
|Interface||USB and RS-232 as standard, an Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact|
|Software||PowerShield NetGuard® software - supports Windows-based operating system, Linux, Unix and Mac|
|LCD display||AC mode, Batt. Mode, Load Level, Input Voltage, Output Voltage, Overload, Fault, Battery Replacement, Low Batt., Batt. Time Remaining|
|Audible alarm||Battery Mode, Low Battery (Batt. Mode), Battery Replacement, Fault, Overload|
|Dimensions (D x W x H)||397 x 145 x 220mm|
|Safety||EN62040-1 -1 2003, IEC 60950-1 -1|
Australian Shipping Via DHL
DHL now offer a great express shipping service to Australia from New Zealand. We are proud to be able to offer overnight shipping to main cities on the east coast of Australia. These main centers include:
Whilst this service is extremely efficient and will be delivered overnight 99.9% of the time, it cannot be guaranteed. In the case where something were to go wrong with your delivery and it did not arrive overnight, it will most likely be delivered by the next day.
While not all major cities are eligible for overnight delivery, they still benefit from this great service. Other centers throughout Australia will have a typical delivery ETA of 2-4 days. (Excluding rural delivery address where this ETA can be extended to an additional three or more days).
If you require urgent shipping and you don’t reside in one of the cities stated above, please contact us and we can find a solution that works best for you.
Please Note: Shipping via DHL is not available to PO boxes and/ or parcelboxes etc.