SHAPE Shoulder Mount Kit with Matte Box and Follow Focus for Sony a7S III

Description

Support your Sony a7S III mirrorless camera for handheld shoots with the Shoulder Mount Kit from SHAPE. The kit includes an aluminium camera cage, a wood-lined top handle with push-button adjustment, a baseplate with a 15mm LWS quick release rod system, a follow focus, a two-stage 4 x 5.6" matte box, a lens support bracket, a V-lock adapter, an HDMI cable clamp, two 18" 15mm rods, dual handgrips with push-button adjustment, a shoulder mount, and a back pad.

The cage and top handle provide numerous mounting points for accessories, including 1/4"-20 threads, 3/8"-16 ARRI-style accessory mounts, shoe mounts, and a 15mm rod port. The camera mounts onto the baseplate, which features an integrated 15mm LWS rod clamp for the included 15mm rods and a V-lock quick release mount. The lens support bracket mounts on the baseplate to support long, heavy lenses.

The follow focus mounts onto one of the 15mm rods and includes a drive gear set, crank, whip, and marking disks, and it can swing away for lens changes. The matte box mounts on 15mm rods, features two rotating stages, and fits up to two 4 x 5.6" filters. It comes with side and top flags, fits a lens front diameter from 52 to 114mm, and includes a step-up filter ring set. The HDMI clamp prevents your HDMI cables from pulling or disconnecting. The dual handgrips mount onto the front of the rods and can be quickly adjusted using the push-button design. A shoulder pad mounts onto the back of the rods for a comfortable fit, and a back pad attaches to add security and counterweight.

SHAPE Quick Handle + Rod Block

The Shape Quick Handle + Rod Block is a professional video stabilisation accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal.

Combined with the anodised aluminium Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle.

Key Features:

• Quick Handle
• Provides professional video stabilisation with 2 handles
• Each handle offers 360° individual rotation
• Offers easy attachment/removal
• Rod Block
• Composed of anodised aluminium
• Offers composite camera support for all 15mm rods
• Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob
• With 2 screw-threaded holes, the Rod Block provides for attachment of components

SHAPE Mini Composite Shoulder Pad

The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into.

SHAPE Back Pad

The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminium plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally.

SHAPE 15mm Rods (18", Pair)

These SHAPE 15mm Rods are a pair of 18" long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18" long and machined from hollow aluminium tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps.

SHAPE Follow Focus Kit with Single 15mm Rod Clamp

Use the compact SHAPE Follow Focus Kit with Single 15mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens.

At the core of the kit is a rubber, anti-slip follow focus wheel attached to a single aluminium 15mm rod clamp. The clamp rotates to adjust to most lens sizes, and it's tightened by a locking lever. The clamp's rotation also allows the focus wheel to easily swing out of the way when changing lenses.

Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses.

For alternate fine-focus configurations, use the included speed crank or 11" whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel.

Key Features:

• Modular design allows for addition and removal of components without tools or screws. Its compact size allows it to fit easily with lens accessories like a matte box.
• The rubber follow focus wheel is attached to an adjustable, aluminium 15mm rod clamp which can swing away when changing lenses.
• The focus wheel fits most lens sizes. Five drive gears are included: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T.
• A rubber friction wheel is included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses.
• An 11" whip and a speed crank are included. Each connects to the focus wheel for fine adjustments.
• Four magnetic marking disks are included to attach to the focus wheel.

SHAPE 2-Stage 4 x 5.6" Matte Box

The 2-Stage 4 x 5.6" Matte Box from SHAPE can be used as a clip-on matte box or can be mounted on industry-standard 15mm rod system. It is designed for light control, insertion, and adjustment of filters. It features a two-stage rotating 4 x 5.6" filter holder. The matte box accepts lenses with a front diameter up to 114mm. It comes with six step-down rings that allow you to fit lenses with an outer diameter of 52, 58, 62, 67, 72, 77, and 82mm as well.

Compatibility:

• Photo lenses with a minimum diameter of 52mm
• Professional video optics with up to 114mm front diameter