SHAPE Shoulder Mount for Sony PXW-FX9 Camera

Description

This SHAPE Shoulder Mount for Sony PXW-FX9 Camera is designed to support the Sony PXW-FX9 camera. The aluminium baseplate features 1/4"-20 and 3/8"-16 screws to secure your camera to the plate, and there are mounting holes underneath to mount the baseplate on a plate or tripod.

The baseplate includes a pair of 12" 15mm rods that insert through the length of the baseplate and are secured with a locking thumbscrew. There are rubber pads on the top of the plate to protect your camera from scratches and prevent twisting.

Key Features:

• Attaches underneath the camera via 3/8"-16 and 1/4"-20 screws
• Locking thumbscrews to reposition the 15mm rods
• Four rubber pads at the top of the base protect and securely hold your FX9 camera
• Multiple threaded holes to mount baseplate on a tripod, shoulder rig, gimbal, or drone

Sony FX9 15mm lightweight baseplate (B15FX9)#####

The lightweight baseplate with 15 mm rod system is designed to match the Sony FX9 optical center. It features two attachment points (1/4-20 and 3/8-16) for securely mounting the Sony FX9 body. The baseplate also comes with a pair of 15 mm rods that are 12” long through the length of the baseplate. The bottom of the plate feature several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod.

Quick handle rod bloc (HAND5)#####

The SHAPE Quick handle rod bloc is a professional video stabilisation accessory with 2 camera handle grips, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple Push-Button located at the articulation allows easy attachment and removal. Combined with the anodised aluminium rod bloc, the quick handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Bloc. The rod bloc is designed with 2 screw-threaded holes allowing the mounting of the Quick Handle. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock.

Composite mini shoulder pad (SHPAD3)#####

The SHAPE mini composite shoulder pad is padded for superior comfort and is made of slip-free material. It is designed with a 15 mm rod block on top allowing to hold 15 mm rods for camera and accessories to be attached. The screw knob allows to attach SHAPE counter-weight (PAD1, PADCW1). By adding extra male-female rods at the back, you can also attach a counter-weight behind the same rods. This way, your body can easily supports the weight of the camera and its accessories. The shoulder pad is also the perfect solution for switching rapidly from shoulder to tripod without having to remove the shoulder pad. It can remain on the camera rig permanently.

Back pad (PAD1)#####

The back pad (PAD1) features a powder coated anodised aluminium plate and arm which are attached to a thick padding on the side facing the user. It is compatible with the SHAPE Mini Composite Shoulder Pad (SHPAD3, SHPAD2, SHPAD1) and can be attach or remove easily from your rig via a 1/4-20 camera screw knob. Additionally, the back pad’s position can be adjusted to the user’s preference – up to 2″ vertically and 360° horizontally. The bottom of the back pad is designed with (2) 1/4-20 threaded holes, allowing to attach other accessories or counterweights.

15 mm 18" rods (15TUBE18)#####

Pair of 15 mm rods 18" long that fit studio and LWS 15 mm rod clamps, allowing you to use available rod mounted accessories. The rods are machined from hollow aluminium tubes and feature chamfered ends that make it easier to insert into 15 mm rod clamps, even if the rod isn't perfectly aligned or is at a slight angle to the rod clamp.