Sachtler aktiv10 flowtech 100 GS Tripod System

Description

The Sachtler aktiv10 flowtech 100 GS Tripod System pairs the activ10 fluid head with the lightweight, carbon fibre flowtech 100 GS tripod with ground spreader. This kit offers lightning fast SpeedSwap technology, a sideload camera plate, 15 levels (+0) of counterbalance, 7 levels (+0) of pan and tilt drag, and stable support for camera rigs weighing up to 12kg. A padded carrying bag rounds out this tripod kit.

Key Features:

SpeedLevel Technology

Use the large integrated lever to quickly mount, level, and lock the head on your tripod or other base; lift up to release, lift partially to level, and press down to lock the head firmly in place

SpeedSwap Base

Centered around a metal stud, the SpeedSwap base clamps onto any 100mm bowl tripod or the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider

PrismBubble Level

The illuminated PrismBubble is visible from any height or angle, saving you time when levelling at higher or lower positions

12kg Capacity Fluid Head

This 12kg capacity fluid head is suited for pro-style digital cine cameras and larger DSLR and mirrorless camera rigs

Stepped Counterbalance and Drag

Fifteen steps of counterbalance and seven steps of pan and drag plus zero settings, for free spins and tilts Sideload Plate S The Sideload Plate S has 12cm of travel for balancing your rig and both a 1/4"-20 camera screw and a locating pin

Sachtler flowtech 100 mm Carbon Fiber Tripod (Ground Spreader)

• Dual-stage, carbon fibre, 100mm bowl tripod.
• Three 3/8"-16 accessory mounting holes are integrated into the outside of the 100mm bowl.
• The legs by themselves weigh only 8.8 pounds but support up to 66 pounds.
• The design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.
• Each leg features a single clamping lever lock design at the top of the leg, near the 100mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don't have to bend down to loosen a lock at the bottom to lower or raise the legs.
• The legs incorporate a locking mechanism that enables the legs to move freely for working with a spreader, or to lock at one of three angles when working without a spreader.
• With the spreader, the height range is 16.9 to 62.6". However, if you remove the ground spreader and utilise the built-in locking mechanism, the usable height range is 10.2 to 60.2".

Sachtler ENG 2 Padded Bag

• Water-resistant Cordura nylon
• Padded interior
• Zipper closure
• Interlocking handles
• Attached, adjustable shoulder strap

Compatible with:

• Sachtler DV 2, DV 4, DV 6 and DV 8 systems on ENG 75/2 D tripod
• Sachtler DV 8 with 100mm ball, DV 12, DV 15, Video 15, Video 18, Video 20 fluid heads on 2-fold extension or Speed Lock CF tripods