Sachtler aktiv10 flowtech 100 MS Tripod System
Features
- aktiv10 Sideload Fluid Head
- flowtech 100 Tripod, Mid Spreader & Bag
- SpeedSwap Clamp-Style Base
- SpeedLevel Technology
Description
The aktiv10 Sideload Fluid Head uses Sachtler 's truly innovative SpeedLevel technology to provide almost instant mounting and levelling of your camera rig on select Sachtler tripods. The clamp and stud SpeedLevel system saves precious time levelling your camera rig by eliminating the need to screw on a tie-down knob. Designed for documentary, news, and corporate production, the aktiv10 supports camera rigs weighing up to 26.5 pounds. This 100mm ball fluid head also features 15 steps of counterbalance, seven steps of pan and tilt drag, and zero settings for both balance and drag.
The proprietary Sachtler SpeedLevel technology replaces the traditional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or other mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever allows you to quickly and easily level the head.
When used with a separately available flowtech tripod, the aktiv10 enables you to spread the legs flat for extremely low shots without a tie-down knob getting in the way. You can also mount your head directly onto a slider using a separately available aktiv system stud that screws onto support systems with a 3/8"-16 threaded stud.
The active 10's PrismBubble is a built-in prism level with two viewing windows that enable you to more easily level the head when the legs are at set at maximum height or at an awkward angle. The bubble level also has two levels of illumination—press once to light up the bubble level or hold longer to illuminate both the bubble level and the counterbalance and drag settings, a boon when working in darker environments.
Mount your camera using the included Sideload Plate S that has both a 1/4-20 camera screw and a locating pin to prevent twisting. With a sliding range of 4.7", this head balances quickly to accommodate variously configured rigs. The Sachtler aktiv10 head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.
Features
aktiv Fluid Head Compatibility
The aktiv10 is compatible with Sachtler 100mm tripods (flowtech 100, ENG 2 CF, ENG 2D, ENG 2 CF HD, SpeedLock, and SpeedLock CF HD)
SpeedLevel Technology
Use the large integrated lever to quickly mount, level, and lock the head on your tripod or other base; lift up to release, lift partially to level, and press down to lock the head firmly in place
SpeedSwap Base
Centred around a metal stud, the SpeedSwap base clamps onto any 100mm bowl tripod or the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider
PrismBubble Level
The illuminated PrismBubble is visible from any height or angle, saving you time when levelling at higher or lower positions
26.5 lb Capacity Fluid Head
This 26.5 lb capacity fluid head is suited for pro-style digital cine cameras and larger DSLR and mirrorless camera rigs
Stepped Counterbalance and Drag
Fifteen steps of counterbalance and seven steps of pan and drag plus zero settings, for free spins and tilts
Sideload Plate S
The Sideload Plate S has 4.7" of travel for balancing your rig and both a 1/4"-20 camera screw and a locating pin
Specifications
Camera Plate | |
Camera Plate Features | Sideload, Sliding Balance Plate |
Camera Plate Type | Sideload Plate S |
Camera Mounting Screw | 1 x 1/4"-20 Male with Locating Pin |
Balance Plate Sliding Range | 4.7" / 120 mm |
Safety Lock | Yes |
Plate Dimensions | 5.5 x 2" / 140 x 50 mm |
Tripod Platform | |
Base Mount | 100 mm Half Ball Sachtler SpeedSwap |
Pan & Tilt | |
Drag Control | Pan: Stepped 7-Step Plus 0 Tilt: Stepped 7-Step Plus 0 |
Drag Type | Fluid |
Vertical Tilt | +90° to -70° |
Panning Range | 360° |
Independent Pan Lock | Yes |
Independent Tilt Lock | Yes |
Physical | |
Load Capacity | 0 to 26.5 lb / 0 to 12 kg |
Counter Balance | Continuous 15-Step Plus 0 |
Pan Handle Fittings | 2 x Rosette |
Included Pan Handle Length | 16.9" / 430 mm |
Bubble Level | 1 x Illuminated |
Operating Temperature | -40 to 140°F / -40 to 60°C |
Dimensions | 7.3 x 5.7 x 5.5" / 186 x 146 x 140 mm |
Weight | 6.4 lb / 2.9 kg |
General | |
Head Mount Type | 100 mm Bowl |
Load Capacity | 66.14 lb / 30 kg |
Maximum Working Height | 61.02" / 155 cm (with Spreader) 60.24" / 153 cm (without Spreader) |
Minimum Working Height | 20.47" / 52 cm (with Spreader) 10.24" / 26 cm (without Spreader) |
Folded Length | 26.77" / 68 cm |
Materials | Carbon Fibre |
Accessory Mounting | 3 x 3/8"-16 Female Thread |
Weight | 9.04 lb / 4.1 kg |
Legs | |
Leg Lock Type | Flip Lock |
Leg Positions | Locking 3 Positions and Continuously Adjustable |
Independent Leg Spread | Yes |
Leg Sections | 3 |
Feet Features | Rubber, Removable, Dual Spiked |
Spreader | Mid-Level |
Carrying/Transport Options | Connecting Handles, Shoulder Strap |
Type of Closure | Zipper |
Exterior Material | Cordura, Nylon |
Padded | Yes |
Interior Dimensions | H: 7.9 x W: 8.5 x L: 35.4" / H: 20.1 x W: 21.6 x L: 89.9 cm |
Weight | 3.6 lb / 1.6 kg |
In The Box
- Sachtler aktiv10 Sideload Fluid Head with SpeedLevel & 7-Step Drag for Select Sachtler Tripods ((100mm Ball)
- Sachtler flowtech 100 MS Carbon Fibre Tripod with Mid-Level Spreader & Rubber Feet
- Sachtler ENG 2 Padded Bag
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Sachtler aktiv10 flowtech 100 MS Tripod System
- Manufacturer: Sachtler
- Model: Aktiv10 Tripod System
- SKU: S2072S-FTMS
- RM Product #: 88597