Shure ANI22BLOCK Audio Network Interface (Block Connectors)
- For Conferencing Applications.
- Analogue Block Connectors.
- Converts 2 Mic/Line Signals to Dante.
- Power over Ethernet (PoE).
- Compact Form Factor, Mounts Easily.
- Product: #66208
- SKU: ANI22-BLOCK
The Shure ANI22BLOCK Audio Network Interface (Block Connectors) is designed to bring up to two line/mic signals onto or from a Dante network. It can be utilised for easy audio routing and convenient browser-based remote control. In addition, it is built with analogue block connectors.
- Works with Microflex Advance and Microflex Wireless systems
- 2 input and 2 output analogue audio connectors
- Converts up to 2 mic / line analogue signals onto a Dante Network
- Converts up to 2 Dante digital audio signals to line/ mic analogue signals
- Power over Ethernet (PoE) eliminates need for outboard power supply
- Compact form factor is easy to mount without equipment rack
|Inputs (Analogue)||2 x 6-pin block connectors|
|Outputs (Analogue)||2 x 3-pin block connectors|
|Dante Connection||1 x RJ45
Channel Count: 2 inputs, 2 outputs
|Polarity||Non-inverting, any input to any output|
|Power Requirements||Power over Ethernet (PoE), Class 0 (PoE Plus compatible)|
|Power Consumption||11 W maximum|
|Operating Temperature Range||20 to 104°F (-6.7 to 40°C)|
|Storage Temperature Range||20 to 165°F (-29 to 74°C)|
|Thermal Dissipation||Maximum: 12.1 W (41.3 BTU/hr)
Typical: 9.8 W (33.7 BTU/hr)
|Frequency Response||20 Hz to 20 kHz ±1 dB|
|Dante Audio Flows||Sampling Rate: 24-bit/48 kHz|
|Latency||Does not include Dante latency
Analogue to Dante: 0.35 ms
Dante to Analogue: 0.71 ms
|Analogue Gain Range||51 dB (adjustable in 3 dB steps)|
|Dynamic Range||113 dB, 20 Hz to 20 kHz, A-weighted, typical|
|Equivalent Input Noise||20 Hz to 20 kHz, A-weighted, input terminated with 150 Ohms
Analogue Gain Setting = +0 dB, -93 dBV
Analogue Gain Setting = +27 dB, -119 dBV
Analogue Gain Settings = +51 dB, -130 dBV
|Total Harmonic Distortion (THD)||<0.05% @ 1 kHz, 0 dBV input, 0 dB analogue gain|
|Common Mode Rejection Ratio||>70 dB, 50 Ohms balanced source @ 1 kHz|
|Input Impedance||5 kOhms|
|Output Impedance||150 Ohms|
|Input Clipping Level||Analogue Gain Setting = +0 dB, +20 dBV
Analogue Gain Setting = +27 dB, -7 dBV
Analogue Gain Setting = +51 dB, -31 dBV
|Analogue Output Levels||Selectable Line 0 dB
Aux -20 dB
Mic -46 dB
|Digital Signal Processing (DSP)||Per Channel: Equaliser (4-band Parametric, Dante channels only), Mute, Limiter, Gain (140 dB range)
System: Channel Summing
|Networking||Cat 5e or higher (shielded cable recommended)|
|Dimensions (H x W x D)||1.6 x 5.5 x 5.0" (4 x 14 x 12.8 cm)|
|Weight||1.5 lb (672 g)|
Australian Shipping Via DHL
DHL now offer a great express shipping service to Australia from New Zealand. We are proud to be able to offer overnight shipping to main cities on the east coast of Australia. These main centers include:
Whilst this service is extremely efficient and will be delivered overnight 99.9% of the time, it cannot be guaranteed. In the case where something were to go wrong with your delivery and it did not arrive overnight, it will most likely be delivered by the next day.
While not all major cities are eligible for overnight delivery, they still benefit from this great service. Other centers throughout Australia will have a typical delivery ETA of 2-4 days. (Excluding rural delivery address where this ETA can be extended to an additional three or more days).
If you require urgent shipping and you don’t reside in one of the cities stated above, please contact us and we can find a solution that works best for you.
Please Note: Shipping via DHL is not available to PO boxes and/ or parcelboxes etc.