Shure ANIUSB-MATRIX USB Audio Network Interface
- For Conferencing Applications.
- Connects 4 Dante Channels.
- Flexible Signal Routing and Connectivity.
- Power over Ethernet.
- Compact Form Fact, Easy to Mount.
- Product: #65838
- SKU: ANIUSB-MATRIX
The Shure ANIUSB-MATRIX USB Audio Network Interface is designed for audio/video conferencing installations in small and medium-size meeting rooms. It can be used to connect 4 Microflex Advanced or Microflex Wireless microphone channels via Dante (4 in/2 out), and provide analogue connectivity to a room audio/video conferencing system or a PC-based A/V conferencing application via USB (1 in/out).
An internal matrix mixer offers flexible routing, allowing users to route any input to any output. A 4-band parametric AEQ filter is also available on the analogue and USB outputs. The ANIUSB-MATRIX is compact and easy to mount without an equipment rack.
- Connects 4 Dante audio inputs and 1 analogue input to an A/V conferencing system or a PC-based videoconferencing application
- Flexible signal routing and connectivity: analogue audio (1 block in/1 block out) to room A/V conferencing system; USB (1 in/out) to connect to laptop or room PC
- Power over Ethernet (PoE) eliminates the need for an outboard power supply
- Compact form factor is easy to mount without equipment rack
|Inputs (Analogue)||1 x 3-pin block connector (active balanced)|
|Outputs (Analogue)||1 x 3-pin block connector (impedance balanced)|
|USB Connection||1 x USB 2.0, Type-B|
|Dante Connection||1 x RJ45
Channel Count: 4 inputs, 2 outputs
|Polarity||Non-inverting, any input to any output|
|Power Requirements||Power over Ethernet (PoE), Class 0 (PoE Plus compatible)|
|Power Consumption||6.5 W maximum|
|Application Control||HTML5 browser based|
|Operating Temperature Range||20 to 104°F (-6.7 to 40°C)|
|Storage Temperature Range||20 to 165°F (-29 to 74°C)|
|Thermal Dissipation||Maximum: 6.8 W (23.0 BTU/hr)
Typical: 6.0 W (20.8 BTU/hr)
|Frequency Response||20 Hz to 20 kHz +1, -1.5 dB|
|Dante Audio Flows||Sampling Rate: 24-bit/48 kHz|
|USB Audio||16-, 24-bit/44.1, 48 kHz|
|Latency||Does not include Dante latency
Analogue to Analogue: 0.98 ms
Analogue to Dante 0.39 ms
Dante to Analogue: 0.72 ms
Dante to Dante: 0.14 ms
|Dynamic Range||20 Hz to 20 kHz, A-weighted, typical
Analogue to Dante: 113 dB
Dante to Analogue: 117 dB
|Equivalent Input Noise||20 Hz to 20 kHz, A-weighted, input terminated with 150 Ohms
Line: -86 dBV
Aux: -98 dBV
|Total Harmonic Distortion (THD)||<0.05% @ 1 kHz, 0 dBV input, 0 dB analogue gain|
|Common Mode Rejection Ratio||>70 dB, 150 Ohms balanced source @ 1 kHz|
|Input Clipping Level||Line: +27 dBV
Aux: +15 dBV
|Output Clip Level||Line: +20 dBV
Aux: 0 dBV
Mic: -26 dBV
|Digital Signal Processing (DSP)||Per Channel: Equaliser (4-band Parametric, Analogue and USB output channels only), Mute, Limiter, Gain (140 dB range)
System: Matrix mixer
|Networking||Cat 5e or higher (shielded cable recommended)|
|Dimensions (H x W x D)||1.6 x 5.5 x 5.0" (4 x 14 x 12.8 cm)|
|Weight||1.5 lb (672 g)|
Australian Shipping Via DHL
DHL now offer a great express shipping service to Australia from New Zealand. We are proud to be able to offer overnight shipping to main cities on the east coast of Australia. These main centers include:
Whilst this service is extremely efficient and will be delivered overnight 99.9% of the time, it cannot be guaranteed. In the case where something were to go wrong with your delivery and it did not arrive overnight, it will most likely be delivered by the next day.
While not all major cities are eligible for overnight delivery, they still benefit from this great service. Other centers throughout Australia will have a typical delivery ETA of 2-4 days. (Excluding rural delivery address where this ETA can be extended to an additional three or more days).
If you require urgent shipping and you don’t reside in one of the cities stated above, please contact us and we can find a solution that works best for you.
Please Note: Shipping via DHL is not available to PO boxes and/ or parcelboxes etc.