| Recorder |
|
| Recording media/file systems |
microSD cards (64 MB - 2 GB), microSDHC cards (4 GB - 32 GB), microSDXC cards (48 GB - 512 GB) |
| Recording / playback formats |
WAV (BWF) |
| Sampling frequency |
48 kHz, 96 kHz, 192 kHz |
| Quantisation bit depth |
24-bit/32-bit float |
| Maximum number of input channels |
2 |
| Maximum number of recordable tracks |
2 |
| Analog audio input ratings |
|
| [MIC] input is selected |
|
| Maximum input level |
+4 dBu |
| Minimum input level |
-76 dBu |
| Input impedance |
2.0 kΩ or more |
| Phantom power |
+24V / +48V
*selectable when [MIC] input is selected |
| [LINE] input is selected |
|
| Maximum input level |
+24 dBu |
| Nominal input level |
+4 dBu (GAIN setting at minimum) |
| Input impedance |
8 kΩ or more |
| Line input (unbalanced) |
Camera/EXT/TC IN jack (can provide plug-in power) |
| Connector |
3.5mm (1/8") stereo mini jack |
| Maximum input level |
+1 dBV |
| Nominal input level |
- 19 dBV (GAIN setting at minimum) |
| Minimum input level |
- 79 dBV |
| Input Impedance |
6.0 kΩ or more (when plug-in power is turned off)
1.6 kΩ or more (when plug-in power is turned on) |
| Plug-in power |
+2.5 V/+5.0 V |
| TC IN |
(Tip: Timecode IN, Ring: −, Shield: GND) |
| Signal level range |
0.5Vp-p to 5.0 Vp-p |
| Input impedance |
10 kΩ or more |
| Analog audio output ratings |
|
| Line output (unbalanced) |
Camera/LINE/TC OUT jack |
| Connector |
3.5 mm (1/8") stereo mini jack
Camera/LINE (Tip: L ch, Ring: R ch, Sleeve: GND) |
| Maximum output level |
+6 dBV |
| Nominal output level |
- 10 dBV (with - 16 dBFS as standard) |
| Output impedance |
210 Ω |
| TC OUT |
|
| LTC selected |
(Tip: Timecode OUT, Ring: −, Shield: GND) |
| Output level |
1.8 Vp-p |
| Output impedance |
1.0 kΩ |
| When MIC selected |
(Tip: Timecode OUT, Ring: R ch, Shield: GND) |
| Output level |
50 mVp-p |
| Output impedance |
110 Ω |
| Headphone output: headphone jack |
|
| Connector |
3.5mm (1/8") stereo mini jack |
| Maximum output |
50 mW + 50 mW
(THD + N less than 0.1% into 32 Ω load) |
| Recommended headphone impedance |
16–400 Ω |
| USB |
|
| Connector |
USB Type-C |
| Transfer format |
USB2.0 High Speed |
| Device Class |
Mass Storage Class
USB Audio Class 2.0 (USB Class Compliant) |
| USB Audio |
|
| Sampling frequency |
48 / 96 kHz |
| Quantization bit depth |
24-bit / 32-bit float |
| Number of inputs |
2 channels * output from this unit |
| Number of outputs |
2 channels *input to this unit |
| Time code input / output |
|
| Format |
According to SMPTE ST 12-1 (LTC) |
| Frame rate |
23.98, 24, 25(50), 29.97(59.94), 29.97DF(59.94DF), 30(60) fps *
* Half frame rate time code is used for high frame rate videos of 50 fps or higher. |
| Bluetooth device connector |
For Bluetooth adapter (AK-BT2) only |
| General |
|
| Power |
3 AA batteries (alkaline, NiMH or lithium-ion)
USB bus power from a computer, etc.
TASCAM PS-P520U AC adapter (sold separately) |
| Power consumption |
3.8 W (maximum) |
| Weight |
267 g (including batteries)
195 g (not including batteries) |
| Operating temperature range |
0 - 40°C |
| Dimensions |
99 x 80.4 x 40.3 mm (W x H x D, including protrusions) |
| Mic amp EIN (equivalent input noise) |
-127 dBu or less |
| Frequency response |
|
| Input jacks 1–2 to PCM data |
20-20 kHz at 48 kHz: +0 dB/-0.5 dB
20-40 kHz at 96 kHz: +0.5 dB/-1.0 dB
20-60 kHz at 192 kHz: +0.5 dB/-3.0 dB |
| Dynamic range |
|
| Input jacks 1–2 to PCM data (20kHz LPF, A-weighting, JEITA) |
132 dB or higher |
| Total harmonic distortion ratio (THD+N) |
|
| Input jacks 1–2 (LINE/MIC IN) to PCM data (1kHz sine wave, −2dBFS input, GAIN setting at minimum, 20kHz LPF, JEITA) |
0.02% or less |
