The Tilta Foldable Charging Station for L-Series/NP-F Battery Kit (2 Batteries) is built to keep productions moving. Six channels of charging charges a full kit of NP-F batteries at the same time (NP-F970, NP-F750, NP-F570, and NP-F550), replacing the slow back-and-forth charging of the usual chargers with less slots.
Standard Mode distributes power evenly across all six bays for a simultaneous full charge. Switch to the Fast-Charge Mode for priority charging of the three highest charged batteries. This mode brings those to a full charge before topping off the remaining three. This gets three ready-to-shoot batteries back in your kit sooner. In this mode, three NP-F970 batteries reach full charge in approximately 5 hours and 11 minutes. The total time to fill all six bays runs slightly longer than Standard Mode, but the trade-off means you're never left waiting on the whole set before you can get back to work.
A smart TFT color display clearly shows the charge level of each battery independently, with channel labels and a low-battery indicator that switches to orange when under 10%.
An active cooling system manages temperature in real time, engaging the fan when temperatures rise, and shutting off once temperature stabilizes. A safeguard is put in place to half the charging current if the temperature reaches too high.
Built-in protection circuits guard against under-voltage, over-voltage, short-circuit, and overcharge, while a low-voltage recovery mode revives NP-F batteries that have sat unused too long. The dock is compatible with PD, QC, and other mainstream fast-charging protocols.
NOTE: A 100W power adapter is recommended for full performance.
