Wooden Camera ARRI PL-Mount Lens to FUJIFILM G-Mount Camera Adapter

Description

The Wooden Camera ARRI PL-Mount Lens to FUJIFILM G-Mount Camera Adapter is a shimmable version of the ARRI PL lens mount adapter that enables mounting of ARRI PL mount lenses onto the Fujifilm G mount cameras. The mount includes a built-in support foot with a 1/4-20 threaded hole that can be used to eliminate strain on the camera. If the Unified DSLR Cage (Small or Medium) is installed, one of the three included Vertical Lens Support Posts can attach to the 1/4-20 thread of the support foot supported by the support post clamp on the DSLR Cage's ARCA Plate. ARRI PL Cap included to prevent dust from entering the sensor area when lens is not attached.

Fujifilm G Mount (GFX) to PL Mount Adapter features a matte black paint on the inside to absorb more light. Additionally, you’ll find a new stainless steel X mount on the back.

If you are using the Fujifilm G Mount (GFX) to PL Mount Adapter without a camera cage, you can use the included DSLR Foot to attach directly to the bottom of your camera and lens mount. This allows all the weight to be transferred from the lens mount to the bottom of the camera to avoid any flexing or damage that could occur when using heavier lenses.

The flange focus is set in-house using collimation tools. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding colour coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity.