- 150W Total Output
- 8" Cone Woofer
- 2x XLR Input
- 2x 1/4" TRS Input
- Low Resonance Enclosure
- Product: #55560
- SKU: HS8S
The HS8S 8" Powered Subwoofer from Yamaha features an eight-inch cone woofer that is capable of up to 150W of output. It can reproduce frequencies down to 22Hz and features variable low and high cut filters between 80 and 120Hz. You can connect to the HS8S through its stereo XLR or 1/4" TRS inputs. It also has stereo XLR extension sub outputs.
Low Resonance Enclosure Design
HS Series cabinets are designed to eliminate unwanted resonance and increase the accuracy of sound reproduction to their extreme limit. The enclosures are constructed from a dense MDF with a damped acoustic response. HS Series engineers also employed a traditional three-way mitred-joint technique. Common to architectural design, this construction firmly anchors the corners of the enclosure to improve durability and eliminate unwanted resonance that can influence overall sound
Noise Reduction Technology
Speaker port design can greatly influence the clarity of overall sound. Often a vortex at either end of the port can generate air vibrations inside the port, causing unwanted noise. By adopting a noise reduction technology that incorporates an analysis of a visual representation of the sound, Yamaha's engineers are able to control and reduce the vortex. Through this analysis, Yamaha has arrived at a port design that reduces noise up to 6dB
Controls and Connectivity
The HIGH CUT control sets the cutoff frequency of subwoofer output high-frequency attenuation from 80Hz to 120Hz, while PHASE switch adjusts the phase of the subwoofer output. The LOW CUT switch and LOW CUT controls enable attenuation of low frequencies for output between 80Hz and 120Hz. The HS8S subwoofer is equipped with XLR and TRS phone jack inputs and for outputs XLR for L and R and EXT SUB out
|System Type||Powered Subwoofer|
|Frequency Response||22 to 150 Hz|
|Transducer||1x 8" (203 mm) Cone|
|Input Sensitivity||-10 dBu|
|Impedance||Input: 10 kΩ
Output: 600 Ω
|Inputs||2x Balanced XLR3-31 Type
2x Balanced 1/4" (6.35 mm) TRS
Phase Switch: Normal/Reverse.
High Cut Control: 80 to 120 Hz, centre click
Low Cut Control: 80 to 120 Hz, centre click
Low Cut Switch: ON/OFF
|Indicators||1x Power ON, White LED|
|Dimensions (W x H x D)||30 x 35 x 39 cm|
Australian Shipping Via DHL
DHL now offer a great express shipping service to Australia from New Zealand. We are proud to be able to offer overnight shipping to main cities on the east coast of Australia. These main centers include:
Whilst this service is extremely efficient and will be delivered overnight 99.9% of the time, it cannot be guaranteed. In the case where something were to go wrong with your delivery and it did not arrive overnight, it will most likely be delivered by the next day.
While not all major cities are eligible for overnight delivery, they still benefit from this great service. Other centers throughout Australia will have a typical delivery ETA of 2-4 days. (Excluding rural delivery address where this ETA can be extended to an additional three or more days).
If you require urgent shipping and you don’t reside in one of the cities stated above, please contact us and we can find a solution that works best for you.
Please Note: Shipping via DHL is not available to PO boxes and/ or parcelboxes etc.